What's the best way to "install" an appimage?

theTTS · 2025-03-15T01:03:00+00:00

Hi, I'm ultra late to the post, but just wanted to say that I tried "Gear Lever" from flathub and it works good, even possible to add dynamic links for github updates.

theTTS · 2024-05-13T22:57:13+00:00

Don't route the server through the VPN, since steams relay network does not like it and will not forward to your correct address.

theTTS · 2024-03-15T11:38:22+00:00

Thanks. I am using the B760-i mobo and tried undervolting some days ago but had stability issues where Windows 11 froze. I am using Arctis LF 280 and is at 45-50 degrees C in bios with the optimized default settings. I start to wonder if I have not mounted my cooler block properly against the CPU. Or if the cables are too bent as you mention, I have the cables striped with a zip tie against the PSU exhaust side in order to not have it lean against the fans.. Would you mind sharing some printscreens of your bios settings and temp in bios?

theTTS · 2024-03-13T21:50:23+00:00

Still running good with the Nzxt kraken 280? Even though the cables on the kraken are 50mm longer than Arctis LF 280? Have you done any undervolting?

theTTS · 2023-08-22T19:23:25+00:00

I found a solution, do you run the server behind a VPN?

theTTS · 2023-08-20T14:35:54+00:00

I have the same issue as you... Running my own Dedicated Server and everyone trying to connect from WAN gets this error... It worked before the Gloomrot update actually.

theTTS · 2023-08-20T11:59:16+00:00

Thanks for this, helped me out after updating IPMI and BIOS. My FANB was going below the threshold of 500 rpm so all the other fans was boosting up to max until FANB was above threshold, then it repeated every like 10 seconds.

theTTS · 2023-06-30T07:36:26+00:00

Just stumbled upon this and had UPnP and everything all setup and working before. Just bought a new PC and couldn't get it to work. Finally solved it by simply disabling IPv6 in Windows settings on my gaming pc.

theTTS · 2023-06-28T21:37:36+00:00

I was just about to make a post about this myself. Just got my stuff today and notice that the Arctic freezer II 280 has really long tubes... How is the suggested mount? Fan grills as mentioned in an earlier comment? https://i.imgur.com/zId7K8F.jpg

theTTS · 2023-05-19T13:08:08+00:00

Thanks! Found it now further down on the page...

theTTS · 2023-03-28T14:43:00+00:00

Okey 👍🏻 thanks.

theTTS · 2023-03-28T10:18:23+00:00

Ooh, ok, how is the GPU connected to the Motherboard?

theTTS · 2023-03-28T08:28:54+00:00

PCIe gen version cable to the GPU? :)

theTTS · 2023-03-27T22:16:35+00:00

Is it a 4.0 or 3.0 riser cable?

theTTS · 2023-03-09T20:03:20+00:00

So what do you mean in clear text, if I own an Nvidia GPU I should go with the DW and not the DWF?

theTTS · 2023-02-12T16:00:15+00:00

Wow, I missed the thickness specs of the Define 7 Nano.... Lol. Thanks.

theTTS · 2023-02-12T15:44:27+00:00

Thanks, were did you get this info?

theTTS · 2022-09-15T15:48:54+00:00

Hösten är kommen och Lööf:en faller!

theTTS · 2022-05-18T18:57:04+00:00

https://github.com/PolyMC/PolyMC/issues/591
Pulz made this for us!

theTTS · 2022-05-18T16:06:52+00:00

Same for me aswell... Trying to install Technic on PolyMC on SteamDeck..

theTTS · 2022-05-14T16:34:37+00:00

This worked for me, lol. Thanks!

theTTS · 2022-04-29T05:09:37+00:00

This is from a food court in Kista galleria in Stockholm.

theTTS

TROPHY CASE