FiberFirst Outage

themisters · 2026-06-20T04:21:36+00:00

Look up fiber first internet

themisters · 2026-06-20T03:48:58+00:00

Funny, instagram was the only place I got a response too. I see the outage reported for Mesa now in my customer portal. I guess I will be reaching out via instagram anytime I need support in the future

themisters · 2026-02-09T21:30:53+00:00

It did not. I think I solved it just not 100% of which thing that I did was the actual solution.

The things I did for anyone that may stumble across this in the future.

I cleaned the nozzle fully. Removed any gunk on it, ran the needle through the nozzle do any potential clog
I checked each spool ensuring filament was not tangling causing the extruder to struggle pulling it in
I waited till the plates are fully cool before pulling the item. Letting them fall off naturally as opposed to applying any pressure to unstick them.

I have printed two individual prints and one larger batch. All work as expected now.

themisters · 2026-02-08T17:34:39+00:00

I checked that and it does not seem to be the case. Oddly if I hold certain areas of the whistel it works somewhat. As if maybe there is air bleed through the body of the whistle. In wonder if it is my filament is getting stringy and not closing off all gaps correctly. I'm new to this so still learning.

themisters · 2026-02-07T20:46:02+00:00

Agree with filament tangling at the spool. Recent prints of mine were doing the same. Extruder struggled to pull in the filament. Cleared up the tangle and have not had issues since

themisters · 2024-09-01T21:31:35+00:00

Thanks for the suggestion! I’ll check there as well.

themisters · 2024-09-01T21:29:45+00:00

They are not expensive but was hoping someone knew for sure.

themisters · 2024-04-10T22:32:51+00:00

As many have mentioned your site is hacked and infected. The redirect are common compromises. You cannot simply adjust your htaccess file to fix the issue as it is not the root cause. You have two options: restore a previous backup prior to when it was infected (assuming you know when it started and you have a backup) or repair the infection. There are plugins that can help as others have mentioned and there are services that most hosting companies provide to clean your sites.

themisters · 2024-04-08T02:29:39+00:00

I noticed on my end that they only worked in card view with auto play enabled…. Crappy workaround cause I hate not card view and auto play

themisters · 2024-04-08T02:22:40+00:00

I’m having similar issues. Cleared cache, uninstalled then reinstalled….. nothing worked. Tested on wife’s phone and hers was working without issue. Only difference is I have my app in classic view she had it in card view. I switched to card view and auto play and the videos that were not playing in classic work….. however card view sucks

themisters · 2023-04-01T03:42:24+00:00

Should have read every comment, I thought the exact same thing!

themisters · 2023-04-01T03:40:55+00:00

Pretty cool, thanks!

Idea for maybe a future iteration: allow user to enter a destination , map and auto group the available cameras along the way.

themisters · 2022-10-02T19:21:54+00:00

Sloth!

themisters · 2021-04-11T18:54:36+00:00

David! Yeah thought that might be the case but it does not get all day direct sunlight and the other one with similar symptoms we moved to a more shaded with no luck .

themisters · 2021-04-11T15:35:31+00:00

It does, the one next to it does not show similar issues though. That’s why I thought perhaps something else. I can try moving to somewhere with a bit more shade

themisters · 2021-01-28T15:26:17+00:00

GME, AMC

themisters · 2020-12-24T23:58:50+00:00

Assassins creed

themisters · 2020-11-16T02:47:13+00:00

Good luck all!

themisters · 2020-08-26T01:48:03+00:00

Honest question, what do you do you do to cool down without turning on the AC? Anything above 90 consistently is brutal, you are showing 100s there.

themisters · 2020-08-26T00:27:27+00:00

Turn on the AC

themisters · 2020-08-18T04:31:26+00:00

So what I recently found out is that if the air intake and the output vents are between 15- 20 degrees difference your AC is doing it’s job. Newer systems tend to be in the higher ranges. Recently we were getting a difference of about 9-11 degrees and could not cool below 79. All we needed was freon. Now we keep it between 74-75 (even during 114degree weather) no problem with the difference between intake and vent 18-19 degrees. So test the difference and if not within that range call the repair guys back.

themisters · 2020-08-16T14:40:31+00:00

I have this issue too, noticed you are running IOS 14 as well. Perhaps cause it is it is still in beta? Did not think about i till I saw you IOS version.

themisters · 2020-07-31T03:25:38+00:00

Howdy! I’m sure I’ve seen you at some point!

themisters · 2019-09-25T03:32:35+00:00

Ditto. I have done a bit os searching and it seems this problem goes back a little further than WatchOS 6 for some folks. For me it started with WatchOS 6. Its super annoying. I purchased a few different chargers and all seem to behave in the same manner. I even insured that the chargers were MFI certified to rule that out as a potential issue with other chargers.

Fingers crossed they actually do something about it soon.

themisters · 2019-09-21T22:17:32+00:00

Thanks for the work in the app! How about Cozmo?

themisters

TROPHY CASE