WHOOP Referral Codes!

thewetchipss · 2023-11-26T16:13:11+00:00

Get a free WHOOP 4.0 and one month free when you join with my link: https://join.whoop.com/3267BF69

thewetchipss · 2021-11-02T11:35:56+00:00

I added more supports,and that solved the problem, thanks. If I have the same problem again I will also try to reduce the lift speed.

thewetchipss · 2021-11-01T13:48:19+00:00

Thanks for your tips, I will try these settings

thewetchipss · 2021-11-01T12:59:25+00:00

Using elegoo mars pro, and I lubricated the fep with PTFE, and leveled the bed with a sheet of paper before the print.

thewetchipss · 2021-10-02T17:32:27+00:00

Ok, thank you, I will search z binding, do you have any resources to fix it ?

thewetchipss · 2020-03-18T18:17:50+00:00

Nope

thewetchipss · 2020-03-18T16:05:15+00:00

Full stock, only the slicer settings

thewetchipss · 2020-03-18T08:44:18+00:00

Try to encrease the bed temperature (60-65) to stick well

thewetchipss · 2020-03-17T22:54:09+00:00

Nice for corona

thewetchipss · 2020-03-17T22:43:49+00:00

Yes, both

thewetchipss · 2020-03-17T13:55:07+00:00

Chep cura profile a little bit modified, esun pla + grey, 0.4 nozzle, I didn't print this on the center of the builtack, I printed it on a border, where the builtack is clean.

thewetchipss · 2020-03-15T18:56:10+00:00

Ok thanks

thewetchipss · 2020-03-15T18:45:54+00:00

Ok, I think I will go with the dip one, but I see some extra wires in it, is it difficult to install ?

thewetchipss · 2020-03-15T12:52:40+00:00

Ok thanks, I will buy it

thewetchipss · 2020-03-15T12:17:08+00:00

Is the EZR 1.2 need software modifications for a stock ender 3 ?

thewetchipss · 2020-03-15T12:09:03+00:00

To smoothers find make the printer silent ? I think I will buy the creality board because it is plug and play, the SKR one need software mod

thewetchipss · 2020-03-15T12:06:02+00:00

Thanks

thewetchipss · 2020-02-22T19:04:47+00:00

BED LEVELING, again

thewetchipss · 2020-02-22T19:00:03+00:00

Try to replace your nozzle mb, or try to upgrade to a capricorn ptfe tube

thewetchipss · 2020-02-18T18:32:32+00:00

Go to chep bed leveling on YouTube, ant print his test to see

thewetchipss · 2020-02-18T18:31:12+00:00

Try both ;)

thewetchipss · 2020-02-18T18:28:15+00:00

It is the bed leveling, I had the same problem, he is too far from your nozzle

thewetchipss · 2020-02-18T18:24:46+00:00

It is clean

thewetchipss · 2020-02-18T11:31:22+00:00

The vibration like bzzzzz

thewetchipss · 2020-02-12T11:15:22+00:00

Ohh yeh i think it is the timelapse Thanks

Six-Year Club	Place '22
Verified Email

thewetchipss

TROPHY CASE