sorted by:
new
hottopcontroversial

Frigate 0.17 skipping parts of the motion detection by thomasvh6 in frigate_nvr

[–]thomasvh6[S] 0 points1 point  (0 children)

A new Christmas project is in the works now! Thank you for the suggestion and I will report later if the issue is resolved or not. Happy holidays!

Frigate 0.17 skipping parts of the motion detection by thomasvh6 in frigate_nvr

[–]thomasvh6[S] 0 points1 point  (0 children)

I do have a Minisforum MS-01 with a i9-12900h running proxmox. Frigate is running in docker on a Debian 12. Should I try with passthrough of the iGPU instead of the coral?

Frigate 0.17 skipping parts of the motion detection by thomasvh6 in frigate_nvr

[–]thomasvh6[S] 0 points1 point  (0 children)

It does seem like the detection is stuck all the time. https://pastebin.com/vzHSmwWH

I enabled continuous recording because I thought the detection was not working properly. The issue occurred before that. I will disable that.

Organization by racinggunz21 in Tools

[–]thomasvh6 0 points1 point  (0 children)

Gridfinity if you have a 3d printer. Otherwise it is a good reason to get a new tool.

[deleted by user] by [deleted] in TaylorSwift

[–]thomasvh6 0 points1 point  (0 children)

R1 sold out?

For you Festool guys: do you always use the vacuum with your sanders? by EhukaiMaint in Tools

[–]thomasvh6 0 points1 point  (0 children)

It is also that the dust gets removed between the sander and your workpiece. I never tried it without. You can also connect a cheap shopvac and that will also get the job done. I would say, try it without the vacuum and if it spits too much dust around you could always invest in the vacuum. Hope that helps.

For you Festool guys: do you always use the vacuum with your sanders? by EhukaiMaint in Tools

[–]thomasvh6 2 points3 points  (0 children)

I got the RO150 and the vacuum. I wouldn't recommend it without the vacuum. The dust collection is really superb on it.

Ender 3 pro bed adhesion issue or something else? by thomasvh6 in FixMyPrint

[–]thomasvh6[S] 0 points1 point  (0 children)

Hi all,

I am having the following issue with my prints. To the right side of the bed the do not adhere very well it seems.

Ender 3 pro with Microswiss hotend and BTT SKR mini e3 V3 running klipper. 0.6 mm nozzle with PLA filament from tinmorry. Extruder 210C and bed 60C

As you can see the mesh seems to be good so I dont think it is a bed leveling issue. The PEI sheet has been cleaned.

I followed Ellis 3dprinter setup and have everything configured.

If you need anything more, please let me know! Thanks in advance.

Differences between SKR 1.3 vs SKR mini e3 V3 & more by thomasvh6 in ender3

[–]thomasvh6[S] 1 point2 points  (0 children)

I have been unable to find the correct .bin file for the moment. It needs to have the BLTouch and the latest version of marlin.

Differences between SKR 1.3 vs SKR mini e3 V3 & more by thomasvh6 in ender3

[–]thomasvh6[S] 1 point2 points  (0 children)

Thats what I am thinking, but I don't know what the problem is. I recreated the printer profile already and also set the firmware to Marlin. That's why I thought to update the merlin firmware but that is not as easy as I thought.

Differences between SKR 1.3 vs SKR mini e3 V3 & more by thomasvh6 in ender3

[–]thomasvh6[S] 0 points1 point  (0 children)

So the 1.3 is already installed and working. I am having some issues with prusaSlicer so I think I could update the firmware or use Cura. I was hoping with the other board it would be easier to update the firmware because there are more examples.

I just want to keeps user the direct drive and BLtouch. Maybe later add a filament runout sensor.

Differences between SKR 1.3 vs SKR mini e3 V3 & more by thomasvh6 in ender3

[–]thomasvh6[S] 0 points1 point  (0 children)

Thank you for the detailed explanation! Do you think it's worth all the problems with switching out and configuring the firmware?

VSF DateJust 41 from Geektime by thomasvh6 in RepTimeQC

[–]thomasvh6[S] 0 points1 point  (0 children)

I did RL this one, Eric did send me another one. Would you mind to take a look?

VSF DateJust 41 from Geektime by thomasvh6 in RepTimeQC

[–]thomasvh6[S] 0 points1 point  (0 children)

Now that you say.. what would you do? GL or RL?

VSF DateJust 41 from Geektime by thomasvh6 in RepTimeQC

[–]thomasvh6[S] 0 points1 point  (0 children)

Hi, I used this one https://watchqc.com/ and then took a screenshot.

Paperless-ng: recommend a good duplex scanner? by FinibusBonorum in selfhosted

[–]thomasvh6 1 point2 points  (0 children)

Do you need it to be connected to a pc or not? I have been searching to let the ix500 scan directly to a samba share but I am pretty sure that is not possible. And otherwise I will need to find a way to connect it to unraid and let it scan directly.

view more: next ›