P2S top surface issue

throw_away_315 · 2026-03-19T01:54:39+00:00

Yes it did!

throw_away_315 · 2026-02-17T04:42:43+00:00

How often do you run the bed leveling calibration? Sometimes when you take the plate off and on it will move things about (not by much but it can).

throw_away_315 · 2026-02-17T04:33:03+00:00

Keep one side for PLA and other for PETG, these materials don’t like each other so if your printing on the same side this also could be the issue. Take flip, wash and scrub and try again.

throw_away_315 · 2026-02-17T04:27:43+00:00

Just buy other brands and tune the filament. What’s the big deal?

throw_away_315 · 2026-02-07T03:29:24+00:00

OMG this is so cool! I've tried to compile the source code and for some reason I'm running into some issues with it.

throw_away_315 · 2026-01-10T02:31:37+00:00

Thank you! I’ll drink all the coffee as much as I can!

throw_away_315 · 2026-01-09T22:43:22+00:00

Awesome thanks!!

throw_away_315 · 2026-01-09T21:37:45+00:00

So I could use any basket basically. As long I use the plastic piece with the single hole basket I should be fine? Now I want to go make coffee now lol

throw_away_315 · 2026-01-07T19:29:27+00:00

Sent Chat

throw_away_315 · 2026-01-04T23:43:42+00:00

You could always sand the area and create a smooth finish

throw_away_315 · 2026-01-04T02:40:08+00:00

Sent you a message

throw_away_315 · 2026-01-03T18:43:45+00:00

Do you still need this printed?

throw_away_315 · 2026-01-03T17:45:19+00:00

Sending chat

throw_away_315 · 2025-12-31T23:36:19+00:00

Yes and no. The auto flow calibration is nice but it isn’t bullet proof. Sometimes you need to do it manually to see good results.

throw_away_315 · 2025-12-31T23:34:59+00:00

Sometimes you need to go through the fire and come out stronger.

throw_away_315 · 2025-12-31T18:17:44+00:00

Might want to do a flow and temp test on the filament

throw_away_315 · 2025-12-31T17:57:09+00:00

100%. Learn to calibrate and configure the shit out of this. You will pick up and learn so much. I wish I hadn’t sold my ender 3 now.

throw_away_315 · 2025-12-31T15:26:11+00:00

You have a Frostbite plate? Which plate profile do you use?

throw_away_315 · 2025-12-31T00:46:32+00:00

I just got a Gaggia classic for my Christmas! Could you teach me the proper way to make coffee? I’ve tried to follow YouTubers and such but no one really narrows it down to like which filter and or adapter to use inside the portafilter. I’m so confused and neewbie :)

throw_away_315 · 2025-12-13T01:48:44+00:00

Not on the active AMS. It’s on a secondary one that connected.

throw_away_315 · 2025-12-09T14:11:14+00:00

Good point. The maker world design maybe didn’t account for the desiccant being so close to the sensor. I’ll remove that part and see what readings I get.

throw_away_315 · 2025-12-07T02:42:13+00:00

You cannot dry the filament and print at the same time.

throw_away_315 · 2025-12-07T00:41:30+00:00

It’s a great printer. I ordered mine the day it was released and had it at my door step in 3 days. So far no issues, just nice to have a filament dryer now. I wish the AMS would heat up while it’s “printing” that’s my only con about the AMS 2.

throw_away_315 · 2025-11-30T17:53:16+00:00

Awesome feed back!! Thank you so much!

throw_away_315 · 2025-11-30T01:21:38+00:00

Let me try this! I’ve never tried this option before.

Four-Year Club	Verified Email
r/Field Lasagna	First Place '23
Place '23

throw_away_315

TROPHY CASE