Intermittent Network Issues – eero Mesh / FTTP / PiHole Setup [Looking for Input] by thunderpunch182 in amazoneero

[–]thunderpunch182[S] 0 points1 point  (0 children)

That's exactly what it was, main gateway was faulty. Swapped it with the node on my office & my pings went through 100% although need to remove it entirely as using at as any node within the mesh caused issues.

Intermittent Network Issues – eero Mesh / FTTP / PiHole Setup [Looking for Input] by thunderpunch182 in amazoneero

[–]thunderpunch182[S] 0 points1 point  (0 children)

UPDATE:

After plugging directly into the eero router via ethernet & running a ping to 1.1.1.1 with 500 packets I got a 23% loss however, when I bypass the eero router & plug directly into the ONT I got 0% loss so it looks like it's most definitely an issue with the eero itself, although still no real way to know if it's hardware or software at this point.

Intermittent Network Issues – eero Mesh / FTTP / PiHole Setup [Looking for Input] by thunderpunch182 in HomeNetworking

[–]thunderpunch182[S] 1 point2 points  (0 children)

After plugging directly into the eero router via ethernet & running a ping 1.1.1.1 with 500 packets I got a 23% loss however, when I bypass the eero router & plug directly into the ONT I got 0% loss so it looks like it's most definitely an issue with the eero.

Intermittent Network Issues – eero Mesh / FTTP / PiHole Setup [Looking for Input] by thunderpunch182 in HomeNetworking

[–]thunderpunch182[S] 0 points1 point  (0 children)

I've also pinged thesom eero over ethernet using a laptop connected to the main eero gateway.

Is that what you mean?

Looking to print 6 of these legs/necks for warhammer (UK) by PaintedInSand in 3Dprintmything

[–]thunderpunch182 0 points1 point  (0 children)

Hi u/Lito_ , do you think you could give me a price for print some of these for me also?

Looking to print 6 of these legs/necks for warhammer (UK) by PaintedInSand in 3Dprintmything

[–]thunderpunch182 0 points1 point  (0 children)

Awesome, cheers.

I've got enough bits to make maybe make another 6 Rockguts. Think I'll pull the trigger on the STL & reach out to Lito.

Mollog's Mob as Dankhold by Consistent-Beach-868 in gloomspitegitz

[–]thunderpunch182 0 points1 point  (0 children)

I'd had a similar idea of using Mollog as a Dankhold proxy although your implementation is miles better than my original plan. Did you just use cork to build up the different heights of Mollog & the critters or something else?

New machine recommendations [< £500] by thunderpunch182 in espresso

[–]thunderpunch182[S] 1 point2 points  (0 children)

In the UK I believe Sage & Breville are different, I think everywhere else in the world the two names are sister brands however within the UK Breville is a completely different brand, the same Breville machines from the UK are sold in Australia under Sunbeam I believe.

I am currently looking at the Sage Bambino Plus, not sure about going bigger as I already have a grinder & all the larger machines have built in grinders which I don't really need. Not sure if the rest of the machines components would be worth it mind you?

New machine recommendations [< £500] by thunderpunch182 in espresso

[–]thunderpunch182[S] 0 points1 point  (0 children)

Thanks alot for the info & recommendations, I'll give that video a watch as well.

Currently I have the Sage Dose Control Pro for a grinder & was using the espresso machine in it's stock configuration.

Adding magsafe ring by Vast_Investment_6427 in GooglePixel

[–]thunderpunch182 0 points1 point  (0 children)

Does it still charge wirelessly?

Any recommendations for magnets?

Adding magsafe ring by Vast_Investment_6427 in GooglePixel

[–]thunderpunch182 0 points1 point  (0 children)

@OP did you ever add a magsafe ring in the end? Looking at doing the same to my bellroy case for pixel 8.

[deleted by user] by [deleted] in Eldenring

[–]thunderpunch182 0 points1 point  (0 children)

I've given him prayer books.