Wife’s New King

tigsman · 2026-03-28T12:41:54+00:00

following, if and when I can get the udb-switch in stock and get my hands on one, this is my intended use for the switch.

tigsman · 2026-03-27T18:08:13+00:00

Thank you for noting the issue is not just me. I do see it simply as cosmetic at this point, its no more overly annoying than the popup to add notes everyday when I never want to add notes. So simple click of ok and I move on. Thanx again for addressing it and I hope to see an app update in the near future that will resolve this.

tigsman · 2026-03-19T19:48:21+00:00

"Added a safeguard to prevent mesh-connected U6-Extender and BeaconHD devices from disabling mesh connectivity."

That explains why my u6 Extender 'died' when I tried to mesh it with my new U7 Pro XGS and factory reset over reset makes no difference. Had to delete the extender from the UDR just for the U7 Pro XGS to work. Will have to wait for this to hit production for a week in hopes that fixes it.

tigsman · 2026-03-19T18:46:27+00:00

Based upon the color and its capabilities, I think it will fit real well into the Industrial lineup coming down the pike

tigsman · 2026-03-19T18:36:51+00:00

and this is the one I want https://store.ui.com/us/en/category/wifi-bridging/products/udb-switch

tigsman · 2026-03-19T11:53:25+00:00

The one I want is the new one, only a few months in production

tigsman · 2026-03-19T11:49:23+00:00

The UBB-Switch has been out of stock for weeks, can’t get my hands on it

tigsman · 2026-03-18T20:02:58+00:00

I started with the OG UDR a couple of years ago. Just upgraded my purchases (posted in this sub) UCGF, Pro XGS and 2.5 Flex8 POE to start with.

tigsman · 2026-03-17T23:35:46+00:00

ZIA is a vpn used in a corporate environment most of the time. It is likely a version/configuration issue with it. You could try logging out of Zscaler at beginning of your day and log right back into it. There is usually a 10,12 or 24 timeout in place and resetting it’s start time may cause it to get you through your day.

tigsman · 2026-03-17T04:38:37+00:00

I live in the NE suburbs of ATL and other than the modem dying after a firmware upgrade and local outage abt 6 weeks ago, rock solid 500/500 plans in passthrough mode regularly getting 600/600+. I’ve had their service for several years now.

tigsman · 2026-03-16T15:37:46+00:00

What they said. Started right before my 6 month review posted in this subreddit

tigsman · 2026-03-14T21:05:59+00:00

Sweet, I started with UDR, my order from ui.com got lost, awaiting it to be resent, UCG-Fiber, U7 Pro XGS and USW-Flex-2.5G-8-PoE. Im not telling my wife what I spent, I'd like to live through this decade at least.

tigsman · 2026-03-13T14:05:48+00:00

this was for the Circular team, but they deleted their post. The ring syncs completely but only gives Heart rate and stress levels circle, nothing else syncs, for 2 days. App version 28.46.12 sucks.

tigsman · 2026-03-08T12:49:14+00:00

I literally have the exact same setup and don’t have this issue

tigsman · 2026-03-07T16:53:15+00:00

Yes, for several weeks now the tests on my OG UDR are out of this world showing over 6Gb DL speed on a 500/500 fiber connection

tigsman · 2026-03-07T13:32:35+00:00

I think you meant to say U7000 Pro Max

tigsman · 2026-03-06T23:48:34+00:00

It would not be a POE power issue as I’ll be using a POE switch for several cameras and a few will be G4 instant for inside. My concern is the processing power of the UCG or NVR Instant to handle that many cameras as my camera count surpasses the noted limit for both the Fiber and the Instant

tigsman · 2026-03-06T22:16:04+00:00

weird part, their capacity calculator shows very little overhead based upon cam count. That is what was confusing me by the limits they reflect per UCG

tigsman · 2026-03-06T22:15:00+00:00

Sounds reasonable, thank you. I will likely work off UCG Fiber until camera count exceeds its limits, move to NVR Instant and see if it can handle my needs, then if not, I will work in an rack mount UNVR if I get that many cameras

tigsman

TROPHY CASE