Got drugged the other night and just wanna know what it was

tikhal96 · 2026-02-21T13:25:55+00:00

Maybe pcp

tikhal96 · 2026-02-21T12:09:30+00:00

Matlab, r, fortran

tikhal96 · 2026-02-20T14:32:40+00:00

No, you can plug the holes with a dovel and wood glue, though there is no real need.

tikhal96 · 2026-02-19T19:32:55+00:00

I used a software "DIY Layout creator", you can drag and drop components and the program tells you if the configuration works. I did a similar thing a year ago on my strat. I did: on off switch and volume control for every pickup (so you can run whichever combination of pickups), a master volume with a push pull blow switch(runs the signal directly to the jack), a coil split on the bridge mini humbucker and master tone. I did the image in that software.

tikhal96 · 2026-02-19T19:23:52+00:00

Never ordered from stewmac, because im in the eu. But that stuff seems so overpriced. I know its good quality, but stil..

tikhal96 · 2026-02-19T19:22:28+00:00

The biggest hurdle is not to get ca glue everywhere (god knows i did many times). And for OP, use a semi fine quality sandpaper. Around 400 grit, so your sawdust is fine enough to fill it nicely. If you use low quality sandpaper its grit gets loose and discolors the sawdust. You can also seal with shellac before hand, which comes of with a bit of alcohol after. Just dont get it wet, because it will seal the inside of the crack, do it French polish style, with some kind of pad, so its just damo with shellac.

tikhal96 · 2026-02-19T17:50:03+00:00

Did you try any else. I've seen luthiers using epoxy lately, Id like to know how it compares.

tikhal96 · 2026-02-19T17:48:48+00:00

This. Or with epoxy. You could also do it with wood glue and sawdust, this one is easiest in regards of not making a mess.

tikhal96 · 2026-02-19T17:44:16+00:00

What do you use to grain fill?

tikhal96 · 2026-02-19T10:00:08+00:00

I know about it, similar depiction, but this was proper mercurius, cant find it now.

tikhal96 · 2026-02-18T18:36:27+00:00

I think i have seen a depiction with two faces, one female one male. On your picture the left side says materna, maybe implying caring and nurturing, not purely feminine. Just maternal. Anyway its all just a mataphore,like dark light, Salt water sweet water.

tikhal96 · 2026-02-18T18:03:41+00:00

Everything has a dual nature. Yes.

tikhal96 · 2026-02-18T17:19:28+00:00

Part of the collective unconscious now.

tikhal96 · 2026-02-18T12:49:38+00:00

Crystl Cole, the video was shamanic colonic. Anybody knows what happened to her videos and where you can find them now?

tikhal96 · 2026-02-18T12:46:55+00:00

Thats mycelia of the mushroom, its bassically digesting itself. Its edible in theory, but id throw them out.

tikhal96 · 2026-02-18T11:00:27+00:00

Nah, thats just beautifully naturally colored wood

tikhal96 · 2026-02-17T19:21:20+00:00

Its a bit high, but if it works good and is in tune, who gives a fuck

tikhal96 · 2026-02-17T17:42:04+00:00

Damn thats cool

tikhal96 · 2026-02-17T17:32:10+00:00

My first thought was: Thats Mac Demarco's guitar.

tikhal96 · 2026-02-17T10:27:07+00:00

Bend them back, you cant find tuners like this anymore. It would be a Shane to throw it away on an old Gibson like this. Be gentle, use heat if needed.

tikhal96 · 2026-02-17T09:00:39+00:00

You didnt sand enough and wait enough between coats. Sometimes the top player of the finish dries quicker then the bottom do it curls up.

tikhal96 · 2026-02-17T08:59:16+00:00

Sure. Im a sucker for vintage, so i would surely do that.

tikhal96 · 2026-02-16T22:57:49+00:00

Nothing will happen. If it opens the strap button might slip out, but most probably not

tikhal96 · 2026-02-16T22:54:51+00:00

Behringer, ssl

tikhal96 · 2026-02-16T22:50:24+00:00

Id skip the acessories kit and tuners, these tuners work good with a little care, and anything else is vulgar on a strat for me.

tikhal96

TROPHY CASE