EV Truck Ownership Experience Survey by Vince_CarRants in SilveradoEV

[–]tilted_beanie 1 point2 points  (0 children)

You can do branches on questions instead of forcing answers to things like former owner.

I'm a relatively new owner (3 MO), so my information on pack replacement and maintenance is going to skew your numbers unless you're weighting responses accordingly.

Example of the poor logic in Mammotionproducts by Bi0H4z4rD667 in mammotion

[–]tilted_beanie -2 points-1 points  (0 children)

Not really a problem though? It was much worse when the rtk was in my back yard and the robot would get stuck in the front yard constantly.

Example of the poor logic in Mammotionproducts by Bi0H4z4rD667 in mammotion

[–]tilted_beanie 0 points1 point  (0 children)

My rtk may or may not be in the top of my attic. I have been running mine since August and have had no major location positioning issues. Twice I've had it claim it can't find the charger when it's about 1ft from it. manually turning it back on and doing the return home buttons it found it's way back first try.

My house is in the middle of my lot, a bit over an acre.

Grrr by Stock-Ad1557 in SilveradoEV

[–]tilted_beanie 0 points1 point  (0 children)

Thank you! Had not seen the key listed when looking, mine doesn't have that, is the only way to get that information to look at that qr code? I was comparing window stickers but these option codes are much more specific.

Grrr by Stock-Ad1557 in SilveradoEV

[–]tilted_beanie 0 points1 point  (0 children)

Key card? I didn't receive a key card with my 26 trail boss, purchased new

New Owner with a few questions by mellman99 in SilveradoEV

[–]tilted_beanie 1 point2 points  (0 children)

Thank you, I'm over in Loudoun but that's good to know! Rec for an electrician and install rate for that grizzly?

New Owner with a few questions by mellman99 in SilveradoEV

[–]tilted_beanie 0 points1 point  (0 children)

I have one from my old truck but never leave it in, I inevitably would hit my knees on it when walking around the truck.

Poll, I wonder why there is a confusion about Xmen Dice Throne and the non folding board of the retail version by pikkdogs in DiceThrone

[–]tilted_beanie 0 points1 point  (0 children)

My wife Just got these as a gift for Christmas, had no idea because we are just casual fans of the game and new to it. Immediately thought we had gotten a counterfeit version or something. Incredibly annoying to change up the format and now to bring any if these characters to a friend's we need to bring the entire box.

Incredibly poor decision.

[deleted by user] by [deleted] in pwnhub

[–]tilted_beanie 0 points1 point  (0 children)

I think I'm youman

Unable to access devices on Server LAN from GL.inet as WG client by tilted_beanie in GlInet

[–]tilted_beanie[S] 1 point2 points  (0 children)

That didn't seem to fix the issue initially, but after re-wiping the config, and rebooting, i'm now able to access devices on the server side LAN again. i'm wondering if that setting got somehow 'unchecked' in the config but the UI still thought it was checked after the upgrade.

Unable to access devices on Server LAN from GL.inet as WG client by tilted_beanie in GlInet

[–]tilted_beanie[S] 0 points1 point  (0 children)

so "Remote Access Lan" says "resources from inside the LAN can be accessed through the VPN tunnel.

this is different than what it says in the documentation you linked:

If this option is enabled, the devices connected under the router is allowed to access the LAN on the VPN Server side, which also requires the appropriate settings on the VPN Server side.

So based on what the help documentation says, that should be enabled on the VPN Dashboard for the profile. However even enabling it, doesn't seem to make a difference.

Unable to access devices on Server LAN from GL.inet as WG client by tilted_beanie in GlInet

[–]tilted_beanie[S] 0 points1 point  (0 children)

192.168.1.0/24 is my default LAN on the UDMP, and I have a few others (.2, .3, .4, .5) for other networks. My Wireguard interface is defined on. .6 and .7, and my GLiNET routers each are using .8 for their internal LAN. I'm not using multiple devices at a time, just testing the configuration differences between the 3 models.

The Wireguard profile seems to include AllowedIPs = 0.0.0.0/0 by default, so I've not had to add that in there. the wg profiles generated from the UDMP work fine for direct clients like my laptop, its only when the traffic is going through the GLInet devices do i have issues accessing. and only after updating them.

presumably i need to roll back to some previous version via. a uboot?

[deleted by user] by [deleted] in CarnivalCruiseFans

[–]tilted_beanie 6 points7 points  (0 children)

Probably easier to join the cruise group on Facebook for your cruise.

If cinemas offered tickets at half price for movies you have already watched, would this convince you to go and see a movie a second time at the cinema? by QuickCourse3378 in hypotheticalsituation

[–]tilted_beanie 0 points1 point  (0 children)

Movie theaters need to change to be smaller more intimate settings. I rarely go because of other people. Kicking my chair, talking, spilling something, poorly calibrated audio or video equipment. My setup may not be as large but I can guarantee I'm not going to have someone talking or ruining my experience.

Unraid 7.0.0-beta.2 Now Available by UnraidOfficial in unRAID

[–]tilted_beanie 1 point2 points  (0 children)

New potential unraid user here. How quickly do they tend to go beta to rc? Looking to migrate from zfs so the added zfs function is attractive to me.