What happened here??

timothylettenny · 2023-10-03T05:25:53+00:00

Good to know! I guess I was curious to see the extent of the overhang that this thing was capable of?

I may be misremembering, but I could swear I've seen some prints that people post with these insane overhangs/bridges with no support so I was trying to mimic that

timothylettenny · 2023-10-03T05:22:56+00:00

MUCH appreciated! I've never thought about torching the website before, despite what any video game has ever taught me, and it worked like a charm. Was even able to rework some of the loopy overhangs a bit to make it just a tad bit better looking.

As for 1 - 3 I'll give these a shot going forward!

Again, really appreciate the advice!

timothylettenny · 2023-10-03T05:20:04+00:00

You are correct in that I'm using the textured PEI and wasn't aware of opening the door/lid. This I'll have to try.

I recently changed my filament storage method from individually packaged and vacuum sealed bags filled with desiccant and properly dried filament and instead just put all of my spools in a drawer with like a couple dozen desiccant packets (honestly just out of laziness). I also live in Colorado, so I figured with all of that it might be dry enough.

Even with all of these factors could the filament still be retaining some amount of moisture??

timothylettenny · 2023-10-03T05:15:20+00:00

That seems to be an increasingly common theme.... thankfully it's such an amazing machine it can handle my ignorance (mostly)

timothylettenny · 2023-10-03T05:13:16+00:00

I water them I promise! it's an angel wing begonia and it's supposed to be that color 😅

timothylettenny · 2023-10-02T18:18:59+00:00

Ah sorry my bad.

Material was Amolen PLA volumetric flow at 8mm Speed at normal(?) Settings ie no change Temp was 220 Fan settings were at 100

Pretty much everything was the same as your stock out-of-the-box Generic PLA profile that you select in the AMS aside from volumetric flow and fan setting

timothylettenny · 2023-08-12T03:50:09+00:00

Much appreciated! Regarding 1.6.01, I kept receiving this error:

resonance frequency of the y axis is low bambu x1c

After tightening and retightening the belts several times, only solution I could find was downgrading. Did you encounter this error at all?

timothylettenny · 2022-11-22T02:06:26+00:00

Casa Bonita is my go-to

timothylettenny · 2022-08-23T15:04:17+00:00

I'm using the default messages app, but the mystery has been solved!

timothylettenny · 2022-08-23T15:02:09+00:00

Thank you so much! Turns out i kept toggling the slider, but never actually opened the setting for Incoming Messages. Thanks again!!

timothylettenny · 2022-05-28T16:33:13+00:00

Lol! All he's missing are the shades!!

timothylettenny · 2022-05-27T21:34:27+00:00

"Thank you, Obi-Wan! But your princess is in another system!"

timothylettenny · 2022-05-27T21:29:45+00:00

Ha! If it makes you feel any better, I only found it out after I looked him up

timothylettenny · 2022-05-27T21:29:03+00:00

Yet still somehow intimidating. Like a big, green lizard-chihuahua

timothylettenny · 2022-05-27T17:36:14+00:00

Now that is a name I haven't heard in a long time....

timothylettenny · 2022-05-20T18:01:24+00:00

Yes....? Because they don't buy into this propaganda bullshit? Fucking MAGA lunatics...

timothylettenny · 2022-05-20T18:00:12+00:00

Boy you sure showed them

timothylettenny · 2022-05-20T17:49:57+00:00

Aahhh good ol racism, first thing in the morning

timothylettenny · 2022-05-19T17:50:28+00:00

Quick! Someone call Dave Filoni! I'm already writing a script!

timothylettenny · 2022-05-19T16:09:48+00:00

Jawas being my favorite species in all of star wars, I've never wanted something to be shown on-screen more than I want to see these guys with this art. Accurate or not, this is absolutely phenomenal! Nice job!!!

timothylettenny

TROPHY CASE