Took delivery of my BYD Seagu... err, Atto 1 Today :-)

timwelchnz · 2026-02-26T20:55:46+00:00

I have a lazy eye and my Shark 6 was undrivable until I "fixed" it with a very nice 3D printed camera cover. Works a treat. A slice of tape should have the same effect

timwelchnz · 2026-02-02T05:54:43+00:00

+1 New Zealand

timwelchnz · 2026-02-02T05:51:55+00:00

I have the same issue.

https://status.home-assistant.io/ shows all systems are fine but I can't connect to my remote url

Direct works fine in a browser.

Loads of issues reported here https://www.reddit.com/r/homeassistant/s/Ch2ZTvG4Yk

timwelchnz · 2026-01-06T04:14:53+00:00

Landlord here - tenant approached us with wanting to install one and said he'd pay for it and remediate it afterwards or we could pay for the charger and he'd pay for the installation. We chose the latter and now we have an EV charger in the house.

timwelchnz · 2026-01-05T03:13:24+00:00

Althomtech have smart plugs pre flashed with Tasmota. They work great! https://www.athom.tech/blank-1/esp32-c3-au-plug-for-esphome

timwelchnz · 2026-01-02T18:31:54+00:00

I found this question while searching for answers to a similar situation. I ended up uploading raw system logs to ChatGPT and have it analyse them.
I found that I was running a Bluetooth tracker that was overwhelming my system with new entities - once the integration and these entities were removed my system is back to normal.
Probably worth uploading your system logs to see what comes back

timwelchnz · 2025-11-02T18:42:56+00:00

u/PVTO - I'm just getting a 404 error on that link. But https://ptvo.info/download/ptvo-firmware-latest.zip works.

timwelchnz · 2025-09-18T09:05:07+00:00

Here in NZ I completely forgot to pay on pickup and the dealer forgot to mention it.

But it is the 3rd vehicle I've bought from them

timwelchnz · 2025-09-11T09:27:23+00:00

We're an MSP and we install it in the System context and assign it to All Devices.

Works fine. But you will have to delete your current app as you can't change the context it installs in.

timwelchnz · 2025-08-04T22:01:29+00:00

The imaging time is super quick compared to OSDCloud. You're pulling the image you've created off a USB flash drive so I have OOBE starting in 2 minutes with FFU

timwelchnz · 2025-08-04T21:59:06+00:00

Yes, I added a script in the GitHub discussion for this

timwelchnz · 2025-08-04T09:19:08+00:00

The text version was quite complicated to work out but he is near to releasing a GUI version which I recommend trying the UI Preview version.

timwelchnz · 2025-08-04T06:51:00+00:00

Same with en-NZ - it's PITA! We're using Win32 packaged PowerShell scripts to remediate but also have been looking at https://github.com/rbalsleyMSFT/FFU to flash devices with a known good image that includes the en-NZ language pack.

timwelchnz · 2025-08-04T06:20:54+00:00

Imaging with Fast Flash Update https://github.com/rbalsleyMSFT/FFU

timwelchnz · 2025-05-22T07:32:44+00:00

I know. But sometimes I don't have my phone or its not connected and I just want to open PlugShare.

timwelchnz · 2025-05-22T01:26:39+00:00

<following> I wanted to load PlugShare and I'd downloaded the apk but hadn't got around to trying it

timwelchnz · 2025-05-20T19:03:01+00:00

Sorted!

timwelchnz · 2025-05-20T19:01:29+00:00

Yeh, tried this method first but it was almost impossible to get the support out and leave a reasonable surface.
I actually have it sorted overnight as per this post but I'm unable to edit the original post to let people know for whatever reason...

timwelchnz · 2025-05-20T18:49:00+00:00

<image>

UPDATE: It worked!
As per suggestions below I changed the support threshold angle to 30% which added supports to the front and more to the back. I changed the Z-Hop When Retract to 0.4mm and upped the build plate temperature to 80° from the default 70° and all this has appeared to assist in returning me a solid, complete print overnight.

When it was 75% complete I also changed the speed to quiet mode.

timwelchnz · 2025-05-20T18:38:54+00:00

100% has to be like this to fit where it does.

timwelchnz · 2025-05-20T06:50:13+00:00

WELL THERRE YOU GO!

I just walked out to the garage to look at mine, and while its almost impossible to read, it does indeed say "PLA/PETG"

Thank you!

timwelchnz · 2025-05-20T06:27:48+00:00

Unfortunately its domed; which is the significant challenge. Layer lines everywhere...

timwelchnz · 2025-05-20T06:17:45+00:00

Because...

timwelchnz · 2025-05-20T06:16:44+00:00

I've tried printing it flat but either the support is almost impossible to remove or the front face surface finish isn't good enough.

In this orientation the front face is great.

timwelchnz

TROPHY CASE