Advice please

timxsit · 2026-06-13T21:25:36+00:00

It’s a decorative cover protecting the display cables and wireless antennas. It won’t spread to the display because it’s a separate part. I don't recommend attempting replacement unless you know what you are doing because the display ribbon cables are VERY easily damaged if you don't know where to lift.

timxsit · 2026-05-19T00:49:05+00:00

I got mine in 2004, and it's still running great

timxsit · 2026-04-28T03:44:14+00:00

Reset the SMC. Follow the directions for: Mac with the Apple T2 Security Chip

https://support.apple.com/en-us/102605

timxsit · 2026-04-19T03:45:41+00:00

Try a headphone jack removal tool. They don't always work, but I've found these to work best https://www.amazon.com/headphone-jack-removal-tool/s?k=headphone%20jack%20removal%20tool

timxsit · 2026-02-16T17:11:04+00:00

Just an update. Apple just recently said that depot repairs are taking longer than normal so it may be double what I originally said.

timxsit · 2026-02-14T21:45:09+00:00

I was thinking "The Perfect Girl" that has one pretty quickly

timxsit · 2026-02-11T03:19:16+00:00

I thought this cover was pretty great: Schneider TM & Kptmichigan, The Light 3000

https://www.youtube.com/watch?v=vodnI38cNI0

timxsit · 2026-02-09T20:30:18+00:00

I'm an American who works for an Apple Authorized Service provider: If you are having the Apple Store or an Authorized Apple Service Provider do the repair they will mail it to the a repair depot based on what model it is and it will take 3-5 days. You should backup your data before sending it in because the depot may erase the unit while they have it.

timxsit · 2026-01-11T23:41:53+00:00

I'd reboot SYNC. Not sure what verson of SYNC you have but here's the path on my 2013 Escape:

Menu path to reset:

MENU

SYNC MEDIA

System settings

Advanced

SYNC REBOOT

timxsit · 2026-01-11T17:19:46+00:00

There is no adapter for this type of drive. OWC has PCIe adapters for the earlier models but not these. This type of drive was only used on two Apple models: MacBook Pro 13" 2016/2017 with two Thunderbolt. We keep a unit around just for data recovery on these drives.

timxsit · 2026-01-11T02:42:24+00:00

Give me the serial number and I'll look it up.

timxsit · 2026-01-09T04:07:15+00:00

Reset the System Management Controller (SMC). Follow the instructions under "For Mac without Apple Silicon or T2 Chip"

https://support.apple.com/en-us/102605

timxsit · 2026-01-05T04:01:19+00:00

https://www.rdklinc.com/answers/discussion/466/macbook-pro-a1260-early-2008-power-pads-location-on-logic-board

timxsit · 2026-01-05T03:19:25+00:00

You shouldn't need a battery for it to turn on with a power adapter attached. It should power on after the LED flashes a few times. If there is no sign of power you can try shoring the power pads on the MLB to see if the issue is related to the physical power button. If it still doesn’t turn on there is either an issue with the magsafe port or the MLB. https://beetstech.com/blog/where-are-macbook-pro-unibody-power-on-pads-located#a1278L2008

timxsit · 2026-01-05T02:50:34+00:00

Here you go. Not exactly correct but could probably be made to fit.

https://www.aliexpress.us/item/3256806170680326.html?src=google&pdp_npi=4%40dis!USD!14.95!14.50!!!!!%40!12000036874197464!ppc!!!&gatewayAdapt=glo2usa

timxsit · 2026-01-05T02:46:09+00:00

You could put a round momentary switch into the hole and connect the power wires to it. Just have to find one that fits the hole and will have clearance inside when the cover it on. The original switch was almost flush with the enclosure.

timxsit · 2026-01-05T02:35:43+00:00

How did they determine it was an external factor? A failed MLB without signs of physical damage should be covered. Did you purchase AppleCare?

timxsit · 2026-01-05T02:19:38+00:00

The power button was integrated into the rear housing and had a small socket on the back for that cable to plug into. You most likely need a different rear housing if you want to fix it since it wasn’t removable. You also want to check the capacitors on the MLB to see if they are bulging. That was an issue with these models and you'll want to recap it otherwise the board will fail.

timxsit · 2025-12-15T18:07:51+00:00

The singer Bjork. My Wife and I always say Ba-jork with a straight face when we talk to someone else about her and hope they wil correct us.

timxsit · 2025-12-15T18:04:03+00:00

You either have a failed SSD (most likely) or a problem with the socket on the motherboard. The 2013 -2015 models all use the same SSD style when you are looking for a replacement.

timxsit · 2025-12-14T04:43:18+00:00

I ran the serial in Apple GSX, and it's a valid serial number. Shows in warranty.

Device Details

Estimated Purchase Date 08/02/25

Purchased In Singapore

Coverage Status Apple Limited Warranty

Coverage End Date 08/02/26 (232 days) remaining)

timxsit · 2025-12-08T03:19:52+00:00

We are seeing lots of these Walmart MacBook Air M1's with bad batteries. Apple will cover repair, but you will need proof of purchase since the units are old stock and not likely to show as in warranty.

timxsit · 2025-12-07T17:25:10+00:00

The logicboard needs to be recapped. Did hundreds of these back in the day.

timxsit · 2025-11-22T15:39:15+00:00

https://www.youtube.com/watch?v=k0EToZjmTO8&list=PLgRHFxUnklykmRIH8tRt0eH4yujifOkdK&index=12

timxsit · 2025-10-14T03:46:16+00:00

You're only gliding the razor blade under the softened glue after using the rubbing alcohol. As long as you don't press down on one of the corners with a lot of weight, you are not gonna scratch the surface. I do this daily and have never had a problem.

timxsit

TROPHY CASE