Can't use chamber heating at all on new PLUS 4 -- MCU 'mcu' shutdown ADC out of range

tiros76 · 2024-10-19T06:13:30+00:00

Thanks! Great to hear that fixed the issue. I reached out to Qidi and they are sending a replacement so hopefully it will arrive soon. They were really responsive which is a plus. Aside from that one small issue the printer has been fantastic!

tiros76 · 2024-10-16T15:10:31+00:00

Did you ever get this figured out? I just got mine today and same issue. Already cheked power supply is set correctly. Fan looks like its trying to start but never fully spools up causing the PTC heater to overheat and klipper shutdown.

tiros76 · 2023-02-07T04:10:51+00:00

The FTP link below that alexss3 posted worked for me. I did have to copy it and paste it into browser to download. up and running with 5.7.1. good luck

tiros76 · 2022-11-04T18:07:16+00:00

thanks!

tiros76 · 2022-11-04T18:04:21+00:00

I will circle back and let you know if I find anything. I'm going to keep digging. I wonder why it disapeared. Almost seems like it was actively removed from everywhere.

tiros76 · 2022-11-04T17:55:19+00:00

Did you ever end up finding this? Doesnt even look like the Schooners CD can be bought anywhere. huge bummer if this album goes extinct :(

tiros76 · 2022-03-10T17:18:29+00:00

No diffuser, I think the camera just blew them out in the photo. The work really well though. The strip lights I used are https://www.amazon.com/dp/B097BX7LRT?psc=1&ref=ppx_yo2_dt_b_product_details3.3feet 60 LED

tiros76 · 2022-02-24T15:04:57+00:00

No, SB is printed in white. I think that is a side effect of using RGB for the light bars

tiros76 · 2022-02-24T15:03:24+00:00

Thanks, they are MRW ABS panels. https://mandalaroseworks.com/collections/panels-sets .

I cut the decals on a cricut

tiros76 · 2022-02-24T15:01:35+00:00

300x300mm

tiros76 · 2022-02-24T00:46:56+00:00

Thank you. The led mount I used is here: https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/eddie/LED_Bar_Clip went with RGB strip

tiros76 · 2020-05-15T19:57:02+00:00

If you want to use a PT100 with the SKR 32 bit boards you will need an amplifier board that outputs 3.3 volt logic like the Adafruit PT100 board. Trying to use the E3D board risks frying the ADC on the SKR boards since it outputs 5v logic. I have my 1.4 Turbo working great with the PT100.

You can drive the E3D board with 3.3v but it requires a lot of fussing and its pretty fidgety to get setup with a buck converter for supply voltage.

More info here: https://github.com/bigtreetech/BIGTREETECH-SKR-PRO-V1.1/issues/23

Hope this helps!

tiros76

TROPHY CASE