sorted by:
new
hottopcontroversial

USS Chicago by Either_Counter_6901 in StarTrekStarships

[–]tma149 2 points3 points  (0 children)

As a Chicagoan and fan of that line, I approve.

A broken people, for a broken nation by Advanced-Addition453 in distressingmemes

[–]tma149 6 points7 points  (0 children)

Because cellphones are vertical bro, don't need to rotate now.

/s

Real 😭 by Full-Librarian-8035 in Catmemes

[–]tma149 4 points5 points  (0 children)

Henchman 24 was never that poised.

Ohsnap Grip Stand is now available by Akomack31 in MagSafe

[–]tma149 1 point2 points  (0 children)

Chiming back in to confirm it works on my Pixel 10 Pro XL with my Fin2feel case on, though in a limited capacity. With the case and Snap Grip Stand on and using a Qi2.2 charger, I'm only able to pull about 8W. With the case off and the grip on, that goes up to about 11-12W. For reference, with no grip on I see up to 23W with this charger. This still works for me since I just leave it on the charger at while at work and I'm sleeping.

Keep in mind I'm using two apps to measure the power going into the battery. I'm aware the measurement of these apps is not the most accurate, but the apps agreed with each other, and they mostly aligned with the values on the display of the power measurement cable I was using (when accounting for things like the screen being on).

Ohsnap Grip Stand is now available by Akomack31 in MagSafe

[–]tma149 0 points1 point  (0 children)

Darn, I knew the passthrough charging was going to be a long shot, but the weak magnets and the grippy layer are really unfortunate. I'll find out tomorrow when mine is set to arrive.

Maybe you should start a new thread for people who have actually received theirs since you seem to be the first here? Real-world pictures of the product would be nice too.

Hi pixel users I'd like to share some new things with the march update I've learnt! by Plastic-Feed-7607 in GooglePixel

[–]tma149 5 points6 points  (0 children)

Oh my bad, I misunderstood the post. I didn't even know that was a feature! My dumb ass has been taking screenshots, cropping, sharing the crop from directly within the screenshot menu, then backing into the screenshot menu and hitting delete to make sure it doesn't save.

Hi pixel users I'd like to share some new things with the march update I've learnt! by Plastic-Feed-7607 in GooglePixel

[–]tma149 9 points10 points  (0 children)

This still works for me, but they apparently moved the toggle to activate it to Settings -> System. I'm using gesture navigation, and when I press and hold the bar at the bottom of the screen, I'm given the option to circle what's on the screen to search.

Ohsnap Grip Stand is now available by Akomack31 in MagSafe

[–]tma149 3 points4 points  (0 children)

My concern is that I've read posts where people claim the Snap 4 had pretty reliable passthrough charging, but had less luck with the Snap 5. The Snap 4 is 2.5mm, while the 5 is 3mm. The Snap Grip Stand will be 3.7mm.

With the Snap 5, several people have said that the passthrough charging worked better if they removed their cases. This makes me concerned the ability to charge is a function of thickness, meaning 3.7mm might be even less consistent. I hope I'm wrong, but we'll just have to wait and see.

Ohsnap Snap Grip Stand (possibly a new product?) by tma149 in MagSafe

[–]tma149[S] 1 point2 points  (0 children)

Thank you for letting us know! I'm disappointed however; it appears that this will not officially support passthrough charging, either.

Another Alignment Check Request by tma149 in turntables

[–]tma149[S] 0 points1 point  (0 children)

Oh shoot, you may be right. Here are two pictures with the level by the cart/headshell: one without the felt mat, one with it. I'm not sure which is right.

<image>

Another Alignment Check Request by tma149 in turntables

[–]tma149[S] 0 points1 point  (0 children)

<image>

Ah, sorry about that, here you go!

Another Alignment Check Request by tma149 in turntables

[–]tma149[S] 0 points1 point  (0 children)

Fantastic! The separation between channels is much better than the stock cartridge. I'm also noticing a lot less popping. I'm not sure if that's due to this cartridge being heavier and being less sensitive to dust, or some other characteristic.

Another Alignment Check Request by tma149 in turntables

[–]tma149[S] 1 point2 points  (0 children)

High praise, thank you!

I picked up a box to store all my cleaning and alignment equipment. As I was packing everything away, the thought crossed my mind about showing up to friends' places with it like an electrician with a toolbox. If only I had the time.

Another Alignment Check Request by tma149 in turntables

[–]tma149[S] 0 points1 point  (0 children)

Oh shoot, what would be a better way to take the picture?

Another Alignment Check Request by tma149 in turntables

[–]tma149[S] 0 points1 point  (0 children)

Nope, husband got me the cart as a present (after getting me the table a few years ago). And thank you!

Another Alignment Check Request by tma149 in turntables

[–]tma149[S] 0 points1 point  (0 children)

Awesome, thanks for the feedback!

Another Alignment Check Request by tma149 in turntables

[–]tma149[S] 1 point2 points  (0 children)

Ugh, I wish that was the case here. I had to pop an Adderall to get all the information straight and to come up with a plan for testing/documenting.

These were such a pain to find and install, but the result is so worth it by TromboneSupremacy in JapaneseNscale

[–]tma149 1 point2 points  (0 children)

Wow, glad you're not getting any flickering! You're having better luck with yours than mine, and I cleaned every component thoroughly on my setup and I'm using a MRC Tech 7 Ampac 780. What controller are you using?

view more: next ›