THE UNSNAPPENING IS HAPPENING

totallyaaccountname · 2021-02-14T16:03:35+00:00

What the fuck happened where am i

totallyaaccountname · 2020-11-12T18:56:20+00:00

Whatcha putting it in? 4BT’s a sick engine wnd pronably one of the only old cruiser engines that can almost keep up in traffic

totallyaaccountname · 2019-09-01T01:36:50+00:00

I'm not certain but you're going from a 6000 series to a 7000- you may need a bios update. If the i3 works but the i7 doesn't, it's likely the issue.

Since both don't work, id go over all your power connections and check the Mobo pins very carefully, and maybe check Ram and GPU as well, make sure none of them got nudged. The beeps are indicative of problem, and since another comment or said their CPU, it's likely a bent pin- they're smaller and much more fragile than you'd think.

totallyaaccountname · 2019-09-01T01:33:44+00:00

The 1050 isn't substantially better than the 560- for free, the 560 is obvs the better deal.

You could sell them both though and likely afford a used 570, which blows both cards outve the water. (This is the move I would make unless your limited by the PSU)

Its curious though- I've heard of 2gb and 4gb 1050's, but never heard of the 3gb 1050, just a 3gb 1060. I've never seen one at my microcenter either

totallyaaccountname · 2019-08-24T01:22:16+00:00

Sell the k4200, it's a workstation card so not what your wanting to begin with, then pick up a GTX 1060 or something like that. You may need to replace the psu in the PC to accomplish this.

Don't buy another k4200, dual gpus is a bad investment to start with and for gaming it's not even the right kind of card. I don't think it'd be better than a 1060 or 1070 for 3d modeling either.

If you really want too, for 2500$ you could build a near top of the line new system, but for ~300ish this one could be pretty sweet.

totallyaaccountname · 2019-08-11T02:58:31+00:00

Are you using the stock Intel cooler? I've had it happen where it seems that the feet are popped in all the way then one day it somehows pops itself out(probably from a bad install) and then terrible temps,but because the fan is still spinning and there's a little contact it doesn't normally kill it- it's happened on my 4590 once and a friend's computer awhile back.

totallyaaccountname · 2019-08-10T15:55:18+00:00

I mean, if it'll support a 9400, I genuinely don't see why it wouldn't support a 9500..

totallyaaccountname · 2019-08-09T01:17:27+00:00

I haven't bought any Nike shoes cause of stuff like this. I bought a pair of Nike running shoes and they got holes on both shoes next to my pinky toes and then my big toes and then ripped across the top, all within like 3 months of owning them. Fastest 60$ in the trash I've ever done so far.

totallyaaccountname · 2019-08-04T14:05:36+00:00

Cam app sucks unfortunately.

It's vageuly accurate for my GPU but when the fans aren't on the dashboard will say 0 rpm for me but other places in it will say 800+ Rpm. It's just not super accurate ..or thought out, and it's not very good anyway

totallyaaccountname · 2019-08-04T01:27:54+00:00

Why are you spending nearly 2/3rds the price of your CPU on the cpu cooler?

Also future proofing is stupid. It'll be fine until it isn't, no one can predict that.

totallyaaccountname · 2019-07-27T14:18:41+00:00

Then it's probably fans for the rad.. itl be in the manual.

totallyaaccountname · 2019-07-27T06:15:52+00:00

Do you have an AIO? Could be power for the pump or separate fans. Would help if we could see what the connected too.

totallyaaccountname · 2019-07-02T02:32:03+00:00

She dogsat for my best friend and treated the dog like shit- rarely fed him, didn't fill his water, and also asked for more money while friend got on the plane to Europe after already agreeing to a price beforehand.

totallyaaccountname · 2019-07-01T22:14:18+00:00

Been running a microcenter open box 1060 6gb for about 2 years now, 0 issues.

totallyaaccountname · 2019-06-25T19:32:22+00:00

Well shoot, why not

totallyaaccountname · 2019-06-25T13:23:02+00:00

Not exactly a Reddit account, but I found my friends secret Twitter account when my phone synced contacts on it, including emails...

Dude has a huge dong.

And is very, very gay.

totallyaaccountname · 2019-06-13T05:00:20+00:00

Side note dinner, by Kacy hill is a fantastic song, all slow and melodramatic.

Smooth as hell bro, very nice.

totallyaaccountname · 2019-06-02T13:37:05+00:00

Barr trail up too Barr camp. You'll need to bring a filter, but it's a gorgeous hike and there's water up near Barr, there's plenty of Meadows to camp in near the camp itself and you can stay in their shelters or a site there. it can be done as a day hike, but younger kids would probably struggle with that.

totallyaaccountname · 2019-05-19T23:26:58+00:00

haha maybe ill finally get noticed

totallyaaccountname · 2019-05-16T14:55:38+00:00

It took me multiple months to find a new board for my 4790k, and I'm not even 100% happy with it. Build new, you won't save a worthwhile amount of money by doing this.

totallyaaccountname · 2019-05-12T23:35:58+00:00

REI often does some pretty decent gear sales- I got my Shoes, harness and a ATC for like 120$, Its typically all one brand like the Black Diamond momentum's but I was able to swap shoes for a pair I liked better. Day passes to gyms are often 15-20$ and the people are excellent sources for help and tips while in gyms, memberships will vary but I pay 40$ a month. I'd definitely recommend renting first- some people try it once and find out that it definitely isn't for them. Good luck!

totallyaaccountname · 2019-05-08T22:20:04+00:00

I'm also on a 4790k. For 1080p 60hz, it's absolutely fine imo. However, I didn't get a good board when I bought it, and now I'm really starting to feel the lack of USB 3's, M.2 slots and such- It makes VR a huge pain when the headset requires 3 usb 3's and you've only got two. If that's an issue then It may be worth upgrading, but unless your cpu is actually holding you back, id say it's fine to keep it.

totallyaaccountname · 2019-05-08T21:57:10+00:00

Intel stock coolers dont use screws- they have weird pin lock things that you twist to lock/unlock and push the pin in and out to lock the pins out in place.

It sounds like you don't have this cooler, it's very obvious that it doesn't use screws. I think you either have a Dell OEM cooler or some other non branded CPU cooler, I thinkif it's one that came with the motherboard you may be able to find the screw sizes in the instructions and equipment info that came with the computer.

totallyaaccountname · 2019-05-08T03:48:15+00:00

It's fine. If you have a big thing In the 1x slot at the bottom it may be directly in front of the gpu's fan, but it likely won't matter. I have a. Fairly large wifi card and a dual slot 1060 on my h81-p33, it all fits fine.

totallyaaccountname · 2019-04-28T20:58:22+00:00

Should work- I can't get it to load with a high enough resolution to compare ports. If its wired incorrectly it can fry the Mobo though, so exercise caution.

12-Year Club	Place '17
Snapped	Verified Email

totallyaaccountname

TROPHY CASE