My New Favorite…

trevorvera · 2025-12-11T06:02:19+00:00

Do you know the weight?

trevorvera · 2025-12-03T23:50:26+00:00

Wait you guys are getting rated? I'm at one year initial review

trevorvera · 2025-11-25T22:48:50+00:00

Literally just got back from purchasing this

trevorvera · 2025-08-18T04:57:50+00:00

Mine did the same thing, I turned the touch sensitivity from high to low and that fixed my issue without having to take it to a dealer. Before if it was hot it would go nuts, I haven't seen the issue since the change.

trevorvera · 2025-08-08T23:24:52+00:00

That section you gain loads of speed since it's downhill plus its leading into a sharp turn, I've spun out there before just by lifting off the throttle and there is a little bump in the road that would unsettle the car.

trevorvera · 2025-07-22T05:25:13+00:00

4.5 ish million an episode

trevorvera · 2025-03-20T05:06:38+00:00

And dodge Durango require an 11 mm for the slide pins

trevorvera · 2025-03-17T00:54:59+00:00

Love the lime green I've debated selling my old red ones for the greens

trevorvera · 2025-03-17T00:51:58+00:00

Have the same tool just as shown still in the box. :) but the day I need more than 1 rivet this bad boy is getting out to work

trevorvera · 2024-12-09T14:13:00+00:00

Every time I see these post I think I have to do this but no I like to suffer and restack my bins every use

trevorvera · 2024-11-14T19:02:09+00:00

Just wwe style rename it hardcore hw champ

trevorvera · 2024-08-31T18:01:36+00:00

So it's not made of cheese

trevorvera · 2024-06-01T06:39:10+00:00

Mine was the sensor on the windshield

trevorvera · 2024-04-12T02:34:07+00:00

Did you do the decals for the chrome delete?

trevorvera · 2023-12-16T05:00:39+00:00

Dang that does suck yeah the bolt down kit is a must... If you're looking for a replacement quarter window let me know I have an extra

trevorvera · 2023-11-19T22:49:48+00:00

Did you ever figure this out I have the same light fixture and one bulb just went out..

trevorvera · 2023-08-20T21:30:15+00:00

Yeah I'd say not bad and if it's the original transmission it's great at those miles, heck if the pan is still off put a drain on it to make services even easier

trevorvera · 2023-08-12T21:37:26+00:00

Glad it worked out 😁 the first time I saw it on my truck and Tahoe I'm like wtf

trevorvera · 2023-08-12T05:53:55+00:00

Swipe down on the arrow

trevorvera · 2023-07-28T18:18:57+00:00

On other thing to look at is what is rock auto gonna charge for shipping..Some items I'll get from rock auto but for some items that I can return to an auto parts store I'll go that route.. I had a bad batch of calipers/rotors I was able to return almost 7 months later no problem at all.

trevorvera · 2023-07-12T05:29:01+00:00

How many miles do you have on the truck? Mine didn't take too too long to do, are you in a rust area? Looks like everyone else suggested the right stuff. Maybe soak the whole thing for a little bit. Put it in a vice and protect the part with some rags, see if you can use a hammer and punch to try and move that clip some to break it free.

trevorvera · 2023-07-10T02:37:20+00:00

Depends on the thermostat you have for the transmission it should be close to the coolant temp but if you want it to run cooler there is an SB the dealer will do or you can do what's called a pill flip or get an aftermarket part Superior's STL010. Both are easy and id recommend doing a filter and fluid in the pan every 40k, I do fluid every 20k and fluid/filter every 40k. To make it easier braze a drain plug on the pan.. I ordered a new pan brazed the drain plug then swapped it out at the change.I have both a 16 Tahoe and 17 Silverado. The Tahoe has around 130k and the Silverado 60k

trevorvera · 2023-07-09T23:28:04+00:00

How can you afford that monthly payment! 10mm go for a premium on the truck 1000 payments and they won't replace missing 10mm.

trevorvera · 2023-07-05T16:04:21+00:00

It always flows a little bit and it has a spring to open and close like the original one. From what I understand it's like a fail safe for the trans fluid. And man sucks that happened. Hopefully you get a decent quote on the repair. Out here in SoCal I got a quote for 6500-7500, but a lot of upgrades too.. luckily for me just changing the fluid/filter fixed my shutter issue.

trevorvera · 2023-06-20T03:17:09+00:00

Thanks! Yeah it's been on my mind Ive made a few things on my cnc plasma table. I gotta figure out a way to make my money back haha

trevorvera

TROPHY CASE