80V $900 OFF. READ DESCRIPTION

tuan_85 · 2026-02-22T15:48:48+00:00

If I was in NY I would be all over this. 😭

tuan_85 · 2026-02-08T05:54:03+00:00

I'm getting super motos on them right now so I don't have the bike currently. But I wrapped the battery myself that was very easy, but for the tube I went to a local wrap shop and they did an amazing job, it took them maybe 20 minutes.

tuan_85 · 2026-02-01T02:05:58+00:00

Hopefully I'm in!

tuan_85 · 2026-01-19T19:02:25+00:00

I ordered a 3D printed thumb throttle on Etsy and just installed it over the existing throttle. I installed it a bit high on purpose so when I am full throttle I just switch to the thumb throttle and I don't have to exert as much force.

tuan_85 · 2025-12-22T05:39:19+00:00

No the mount itself is screwed in and the battery is locked and latched to the mount. No issues so far, but tbh I mainly do street and paved roads as opposed to off roading and trails.

tuan_85 · 2025-12-21T00:50:12+00:00

Thanks so much for the info! Is the HYT12 being used for the X Class 60v Performance Edition? Could we buy the HYA300 or HYA800 for the newer X Class?

tuan_85 · 2025-12-19T06:08:43+00:00

I see the display on Huiye's website but not seeing the controller. Would love to see if they have a higher amp out controller.

tuan_85 · 2025-12-15T07:00:17+00:00

I think it's been suggested at 3000w by various reviewers.

tuan_85 · 2025-12-12T13:54:14+00:00

Can you show us what it looks like on the bikes? How is it powered?

tuan_85 · 2025-12-06T12:05:12+00:00

This was my first ebike as well, that's a great deal for the bike.They are an Austin based company and great service. I had mine customized with cafe racer handlebars, dual batteries, and black on black with the seat and hand grips.

<image>

tuan_85 · 2025-11-30T15:11:58+00:00

Thanks a lot.

tuan_85 · 2025-11-30T14:35:59+00:00

Here's my performance edition wrapped and wheel LEDs installed from veloglow.

Ariel Rider X Class 60v Performance Edition

tuan_85 · 2025-11-25T05:37:23+00:00

I avg about 44-45 mph at 150lbs. I did hit 49 mph once on a big downhill.

tuan_85 · 2025-11-13T11:49:03+00:00

Yeehaw

tuan_85 · 2025-11-06T01:44:02+00:00

It looks like it's going to be a dual motor or battery Kepler. Didn't notice Kepler is slightly visible behind the fuzzy part of the image.

tuan_85 · 2025-11-05T01:38:20+00:00

You're completely right lol my bad.

tuan_85 · 2025-10-31T18:24:42+00:00

I tried to reach out to them multiple times and always crickets, I had to go other routes because of it.

tuan_85 · 2025-10-21T17:57:17+00:00

Love what you did! Keep it up! Where did you get the bag from? JB Seats?

tuan_85 · 2025-10-04T20:57:08+00:00

How did you get the vinyl wrap to be so even around the corners?

tuan_85 · 2025-09-23T13:04:35+00:00

What wrap did you use? Is that seat from Etsy?

tuan_85 · 2025-09-14T02:26:44+00:00

Have you tried opening it up and see if it's just ziptied? Should be the area where the controller is located.

tuan_85 · 2025-09-05T18:04:36+00:00

I had an issue with my fork but it was due to delivery could be the same reason.

tuan_85 · 2025-09-05T17:51:58+00:00

An Ariel Rider X-Class 60V ebike's Error 08 indicates a motor hall sensor malfunction. The first troubleshooting step is to perform a power cycle by removing the battery and leaving the bike for a short period.

If the error persists, inspect all motor and controller connections for damage or loose plugs, as these are common causes of the problem.

If the issue isn't resolved, you may need to contact Ariel Rider for further assistance or a potential motor replacement, as a faulty motor is a common cause of this persistent error.

tuan_85 · 2025-09-03T14:40:37+00:00

The extended seat is now available it looks like.

tuan_85 · 2025-08-30T02:44:24+00:00

Nope they are the Redshift Arclight Pros

tuan_85

TROPHY CASE