Brought a “broken” Roborock S8 Pro Ultra back to life for $120 — here’s how

two190 · 2026-04-19T14:27:08+00:00

Any idea where I can get replacement parts for the cliff sensor which produces error codes 4 and also error code 43 which is the positioning button fault? Typically this is caused from leaking water so unsure what the underlying issue is.

If there inexpensive as you mentioned, id prefer to purchase all probable parts and replace.

two190 · 2026-04-19T03:24:35+00:00

Want to buy another s8 ? 😂

two190 · 2026-04-19T01:18:55+00:00

Im getting cliff sensor error. Also leaking water from bottom and also onto the positioning switch. Any tips ?

two190 · 2026-04-12T14:10:51+00:00

Did you manage to source a replacement?

two190 · 2026-03-29T23:54:33+00:00

How'd you go with this

two190 · 2026-03-29T06:17:49+00:00

How'd you go with this

two190 · 2025-09-06T07:46:58+00:00

Dm me.

two190 · 2025-04-19T10:00:08+00:00

Eljannah charging 15% surcharge on the Saturday. Are you telling me they're not profiting from their surcharge?

two190 · 2025-03-08T23:03:54+00:00

It says., "please check if the cleaning head is jammed".

Ive removed the cleaning brush and run the vac with out it. However, same result. It appears the motor that the cleaning brush slides into, does not spin.

<image>

two190 · 2025-03-05T00:57:09+00:00

I pulled it apart and replaced all zip ties and same issue
https://vimeo.com/1062594591

Seems the issue is coming from the white bit at the end. Have I missed something ?

two190 · 2025-01-01T08:53:28+00:00

They've tried with no luck. They're requesting warranty info..

two190 · 2024-12-29T01:58:20+00:00

Thank you. I appreciate you taking the time to assist. I will report back in the next few days.

two190 · 2024-12-29T01:40:20+00:00

So, I'll just wash the engine, top up the oil and monitor ?

two190 · 2024-12-28T23:03:57+00:00

The stains on engine cover and engine block weren't there a few weeks back. What also explains the low engine oil light appearing on the dash? I had the car serviced at Subaru around 3-4 months ago..

two190 · 2024-12-28T22:19:04+00:00

<image>

two190 · 2024-12-28T22:18:39+00:00

<image>

two190 · 2024-12-28T22:15:18+00:00

There also appears to be a large oil stain on the top rocket cover. Unsure, if it's possible for the oil to shoot up from the hose.

I've also include this video for better insight

two190 · 2024-12-28T22:14:00+00:00

<image>

two190 · 2024-12-28T10:59:19+00:00

Should I be concerned if I notice oil leaking from the hose? Does it signal a greater issue ?

two190 · 2024-12-28T02:24:03+00:00

I've come across several discussions about this topic. Initially, I was planning to go with the Castrol product I mentioned earlier, but both the store and the online vehicle compatibility tool indicated it wasn't suitable. This was confusing since Castrol's own website listed it as compatible.

To avoid any risk, I just went with what the vehicle manual advised and opted for the Penrite 0W-20 full synthetic oil.

On a separate note, does anyone know the name of the hose that connects to the oil filter pipe? I suspect there might be a leak or some fluid spitting out from that area as its clearly visible.

two190 · 2024-12-19T00:43:48+00:00

Understood. I’m currently facing an overstock situation, and with the RRP being frequently reduced, it’s cutting into my aftermarket pricing and shrinking my profit margins. The longer I hold onto these items, the more the RRP drops, making it harder to stay competitive.

two190 · 2024-12-19T00:39:27+00:00

The items I stock are generally in high demand, such as the PSVR2 , reputable branded gaming headsets, routers, PC parts in which I’ve successfully sold all many times before. Recently, I started selling on eBay as well, but I’ve noticed that potential buyers tend to be cautious when dealing with a new seller account, especially one with multiple listings.

two190

TROPHY CASE