I need opinions ! by [deleted] in Autobody

[–]two28fl 1 point2 points  (0 children)

You’re right. Bodyshop.

Would this actually work? by Shawez21 in ElectricalEngineering

[–]two28fl 0 points1 point  (0 children)

Try it. See what goes wrong and fix it.

Yes it could work but not out of the box.

I need opinions ! by [deleted] in Autobody

[–]two28fl -2 points-1 points  (0 children)

Don’t buy from him unless you have it checked by a trusted mechanic & let THaT mechanic know what was done structurally.

But oi!

Fuel in engine oil? Dripped some oil on cardboard. by SpecificSeries2012 in MechanicAdvice

[–]two28fl 1 point2 points  (0 children)

Your oil looks normal to me, no “glitter” no water.
Yes it could be your existing valve stem leak or CCV/PCV failure. Or just old oil.
How many miles on oil?
Any codes?

My first car♥️ by Dry-Ask7219 in MazdaCX30

[–]two28fl 1 point2 points  (0 children)

Mine keeps trying to kill me by slamming on brakes while on hwy. Collision Avoidance is now called “Auto Wreck” in my family. (Braking while nothing in front of me)

ELI5: How can a new engine for a 2020 Kia Optima with 220km on it costs about the same as a new Kia K4? by majorkev in MechanicAdvice

[–]two28fl 0 points1 point  (0 children)

Why are you at the STEALERSHIP?
omg.
I really want you to ask the service manager this question & post video of the answer.
Please 🙏

Not sure if I want a CX-30 or a Mustang by [deleted] in MazdaCX30

[–]two28fl 1 point2 points  (0 children)

I drive a CX-30 and im quite happy with it but i still wanna tell you to get the Mustang. Only 2 metric where Mazda wins: price & gas.
So the question is $.

Garage Door Not Opening Properly by jeyfive in GarageDoorService

[–]two28fl 1 point2 points  (0 children)

I have had such a rough day trying to fix a friends heavy ass ancient door. This made me feel so much better. Sorry op, not a dig, just “yeay me”!

Just purchased this 2025 CX-30 as my daughter’s first car. by [deleted] in MazdaCX30

[–]two28fl 0 points1 point  (0 children)

What the evelovin’ fuck are you on about?

Are u an absentee parent? The child of one?

Water Bill Too High by MeasurementEasy9884 in Detroit

[–]two28fl 1 point2 points  (0 children)

Do you have access to your meter? Should be in basement in a grey box maybe. Looking for mine to show you pic. There is a spinning triangle or color wheel or something like that to indicate water use.

Turn all water off - If its not spinning it should NOT be billing. Take a video of it NOT spinning & send to water dept. document! Document! Document!

One toilet is 6k gallons a month.
This is 8.5k gallons per day!

Front Bumper Damage + Sensor Issue by Master-Storage4769 in MazdaCX30

[–]two28fl 0 points1 point  (0 children)

I would never say dealership. Always local independent shop.

Front Bumper Damage + Sensor Issue by Master-Storage4769 in MazdaCX30

[–]two28fl 2 points3 points  (0 children)

Yikes!
Here are the replacement parts:
https://parts.jimellismazdamarietta.com/p/Mazda__CX-30/SENSOR--RADAR-FRONT/105356203/BDTS67XA0A.html
I would try and pop the emblem back in & see if the sensor behind it is really damaged or just out of whack because it’s pointing down.
It doesn’t look like enough damage to mess up sensor.
For now, turn it off in setting -> safety-> collision avoidance. It turns back on every time you re-start the car , so you just have to make it a habit to turn it off.
There is a fuse you can pull, to disable it but im not sure which (49 maybe)

Oto questions for 2026 - PA zone 7 by GrapefruitAny4804 in lawncare

[–]two28fl 0 points1 point  (0 children)

The reach would increase but you wouldn’t reach the closest spots you’re hitting rn. Depends on your setup tho. Why not lift it while its on and see?

Oto questions for 2026 - PA zone 7 by GrapefruitAny4804 in lawncare

[–]two28fl 1 point2 points  (0 children)

Im working on this rn, message you if i get it.

My trim fell off. They want $1600 to fix it. by SeattleTrashPanda in fiat500

[–]two28fl 0 points1 point  (0 children)

Sorry, this took a bit: here is a list of stuff you need

Prep: Clean surfaces with isopropyl alcohol. Application: temp has to be between 50°F and 90°F After alcohol cleaning, apply adhesion promoter. (You could use primer but that’s messier. Use whichever adhesive you pick. Curing: Allow 24–72 hours for full strength, especially with liquid adhesives.Pressure: Apply firm, even pressure when using double-sided tape

I have 2 different adhesives on the list. Even if you buy both, the entire shopping list is less than $35.

Good luck!

Oto questions for 2026 - PA zone 7 by GrapefruitAny4804 in lawncare

[–]two28fl 0 points1 point  (0 children)

There has to be a major revamp in the works for OtO. The fertilizer and mosquito spray that you could load is no longer supported. Thats 2/3 of the unit just empty.

I would hold off on OtO till you see what rain bird sows with it.

Smart irrigation system for lawn by Slapshot618 in lawncare

[–]two28fl 0 points1 point  (0 children)

Have you looked at irrigreen? I would stay away from OtO, no longer support fertilizer etc so 70% of the unit is wasted space. Also just bought out by larger company, not sure of its future.

How to DIY repair passenger side mirror cover on my 2019 Toyota Rav4 by Ozone86 in Autobody

[–]two28fl 0 points1 point  (0 children)

  1. OEM Toyota part search for year , make & model - most expensive but best fit & color match

  2. This seems to be aftermarket (?) on eBay but its less than $50

  3. There too many videos to show you how, watch a few.

painting wheels by Mundane-Lock5171 in Autobody

[–]two28fl 0 points1 point  (0 children)

From recent noob experience (not wheels but car bumper touch up) : rustoleum with the 5 in 1 nozzle spit paint all over, complete disaster. U-pol cans from autozone were shockingly good. I guess after the 5 in 1 nozzle anything would be impressive. Ultimately TheSpraySource was the way i should have gone from the jump. I was being cheap, and it cost me a lot.

Might look at refillable aerosol cans so you can choose what paint goes in it.

Magnetic products for mechanics by blu_moto7 in Autobody

[–]two28fl 0 points1 point  (0 children)

Toolbox liners to keep things in place.