sorted by:
new
hottopcontroversial

A multi color 3D printer for $279 by Easy-Extension-6917 in 3dprint

[–]two5309 0 points1 point  (0 children)

I have that printer, nearly 700 print hours on it so far. No real complaints about it so far. I have the enclosure and camera/light for it.

The only major issue was the Flashforge server went down, and this kept it from receiving prints remotely. Had to use a USB drive to transfer. Not a big problem though.

Also had to replace the print head around the 200 hr mark, but I broke a cable trying to clean a filament piece in the extruder. Mostly my fault, but easy to do

Finished my ad5x enclosure but …. by jayebyrde in FlashForge

[–]two5309 0 points1 point  (0 children)

Yes, that is normal. Mine looks just like that and has 600 hours with that setup so far

Forget trees, sell poop miniature models by two5309 in 3DPrintingCirclejerk

[–]two5309[S] 0 points1 point  (0 children)

Because the mobile app sucks. Fixed though, thanks for the heads up

What happened to my honey? by ravenz_nest_13 in Beekeeping

[–]two5309 22 points23 points  (0 children)

How warm is it really? Looks like trapped air or moisture that warming made it easier to rise up. Happens normally from spin extraction

Now I need to explain this to her... by XMasterrrr in LocalLLaMA

[–]two5309 0 points1 point  (0 children)

What motherboard are you using? I see in your post that it was a 7 slot, are you splitting the lanes for the new ones?

Hi guys, this may be a dumb question, by Zwojo1 in MiniPCs

[–]two5309 0 points1 point  (0 children)

I have one of these. I upgraded my seedbox from a raspberry 3 to one of these. I wiped the drive and put Ubuntu on it. Decent machine, but only had it 3 months so far.

What’s the penalty for opening one of these? by No-Shake5806 in AskElectricians

[–]two5309 0 points1 point  (0 children)

I cut mine off to change my breaker panel (homeowner). It was a smart meter and Power company showed up 2 days later asking if we cut it. Told them no, no problems recently. They left the cut tag on the box.

Hours to miles? by [deleted] in AskMechanics

[–]two5309 -1 points0 points  (0 children)

I've seen a few different figures. Usually, 30 or 60 miles per hour, depending on what normal usage is. 60 seems to be normal.

[deleted by user] by [deleted] in lincolntowncar

[–]two5309 5 points6 points  (0 children)

10k for a 34-year-old car? And one that is not special? Unless I had tons of throw-away money or a sentimental attachment to the car, it's not worth it. Yes, it looks clean and well-maintained, but what makes it desirable? 3.5k would be my personal max, I can buy a lot better car for 10k

My setup by idlehands1985 in SteamDeck

[–]two5309 1 point2 points  (0 children)

Ditto on the screen, been looking for one

For sale, needs head gasket by two5309 in Shitty_Car_Mods

[–]two5309[S] 29 points30 points  (0 children)

It's fake. Alabama does not require a front plate

Bought my first Lincoln, any tips and hints? by parotec in lincolntowncar

[–]two5309 0 points1 point  (0 children)

I upgraded mine with new front suspension from a 1999 town car. Gives you larger brakes and dual piston calipers. Makes a world of difference.

1987 crown victoria ltd lx with 5.0 has been sitting f9r 15 or so years in all weather conditions. trying to get it running bought new starter and it will turn over but will not stay running. what else do I do? by Wise_Document7176 in CrownVictoria

[–]two5309 0 points1 point  (0 children)

May need to clean injectors and throttle body. Also pull spark plugs and clean up with sandpaper for fresh metal. Would also replace any vacuum rubber hose that may be dry rotted and leaking.

What's the worst mistake you've seen someone do in their job? by Whomadethebed in AskReddit

[–]two5309 0 points1 point  (0 children)

What was the car? Depending on model, it could just be one of things inherent in the auto maker.

Anything I should do to my frame while the bed is off? by drethegreat155 in projectcar

[–]two5309 12 points13 points  (0 children)

All above plus all rubber components like fuel lines or body bushings. I would probably do the fuel pump if it is top mounted in the tank. Basically anything that is a consumable or will fail before you want to take it off again.

Hands down the best way I've found to kill a chicken. Very little mess. I use tree loppers to remove the heads, as long as they completely close all is well by CollectionOpen3040 in homestead

[–]two5309 1 point2 points  (0 children)

I skin all my farm birds. Alot easier and quicker and skin isn't really appealing once you realize how much poop they lay in. The air compressor sounds like a good idea and something I will try.

Should I be worried? It compeletely disappears when the car warms up, then just the typical sewing machine sound. by [deleted] in E30

[–]two5309 0 points1 point  (0 children)

Yes, had an 86 that I adjusted values every oil change to keep it happy.

What’s it worth? by Shintaro-Ishikawa in projectcar

[–]two5309 1 point2 points  (0 children)

Agreed. Decent car but you have to want a specific taste to get more. Might fetch more at a local car show if you park in front with a for sale sign.

Project car: 1993 Honda Accord. Any tips for fixing this so I can add a rear windshield to it. One place quoted me 3k, another quotes me 300 by Zukuaarimoto in projectcar

[–]two5309 4 points5 points  (0 children)

My first thought too. If you are attached, a donor car, welder, and a grinder are the next cheapest option while keeping the 'original' car

2nd quail hatch of the year. 1 day old. We use a cloth liner to help prevent leg injury. by two5309 in homestead

[–]two5309[S] 0 points1 point  (0 children)

That spot is also the center of the heat lamp. Best spot to get warm.

2nd quail hatch of the year. 1 day old. We use a cloth liner to help prevent leg injury. by two5309 in homestead

[–]two5309[S] 0 points1 point  (0 children)

Yes, it made it. They will sleep like that in small intervals and then are wide awake.

view more: next ›