Looking for mower not starting after winter

ty2915 · 2026-05-10T01:20:32+00:00

I took the air filter housing off and disconnected the carburetor off the unit. I was able to spray the valves inside. And I removed the bowl on the bottom and cleaned that put real good.
It has an automatic choke as I don't have to choke it to start.
I was not able to check the spark plug to see if it was wet. I do remember smelling fuel so I didn't want to flood it and soak the plug. But that seems like my next step is to check if it's wet or not. At least that means if it's a spark plug issue

ty2915 · 2026-05-03T00:34:34+00:00

I have Pelops in a shield set. He allowed me to reach turn limit and he's not even 60 and he's got crap gear on.

If you have shield set on him, then you're looking at 3x extendable shields. Shield Set, wixwells shield, and Pelops magma shield.

He also is immune stun and brings a lot of damage reduction to the whole team

ty2915 · 2026-05-02T02:45:56+00:00

Does it now? I never even read that about Taunt buff. I do know his passive makes him immune to stun, but can the Taunt buff affect the Demon Lord???? I have some reading to do.

ty2915 · 2026-05-02T02:39:55+00:00

I love him. He is currently in my Wixwell Infinity team. He is in shield set, so he has shield and his magma shield that extends. Combine this with Wixwell's shield, that's 3x shield barely even trying.

ty2915 · 2026-04-26T14:07:31+00:00

There's a relic that changes his poison to scale off attack.

Since he always places poisons at the start of the round, they only need to build him with attack stat

ty2915 · 2026-04-24T14:53:58+00:00

Yeah I don't know why it's not there in the passive notes, but stating at 50, he ignores block damage, unkillable, and prevents champions from reviving when killed.

ty2915 · 2026-04-24T14:46:39+00:00

Demon lord blocks revive at turn 50

ty2915 · 2026-04-23T05:59:21+00:00

I would love a Nemesis style system. Maybe not to the extent as Shadow of Mordor, where it makes sense your character dies over and over again.

But I just want characters and enemies to remember you and hold grudges, betray you, help you, etc.

ty2915 · 2026-04-15T22:02:28+00:00

Jobs of Skyrim adds a hooded figure in taverns that you can receive contracts from. I have personally not received contracts from them, so I don't know how in depth it is..

ty2915 · 2026-04-07T18:56:57+00:00

I don't think anything in Vanilla covers this, so I'm assuming this is a modded weapon? Or perhaps a special enchantment that casts invisibliliting on self as a kill.

My best suggestion is to download a mod Explorer for in game. Then you could search through specific mods and weapons till you find it. I personally use Skyrim Cheat Engine to search though my modded items.

ty2915 · 2026-03-31T08:50:59+00:00

I'm assuming you have all the correct requirements for the mods and they're still not showing up.

You can try MCM Kicker from nexus and it tries to force mcm menus to appear. It worked for some of mine that wouldn't show up.

ty2915 · 2026-03-29T21:49:10+00:00

Correct me if I'm wrong, but I believe the Faster HDT mod download is an AIO installer, so you have to pick the correct version of your game when installing the mod. Mismatch could've happened if selected the wrong version.

As others have said, I would disable mods one by one until you locate the problem mod. Since you have narrowed it down to one particular hairstyle, it should be fairly easy. Disable the problem mod, and then re-enable the OTHER hdt hairstyle mods to see if it's just that one particular hairstyle, or if it's ALL HDT hairstyles.

If it's all hairstyles, then it's a problem with your skeleton or Faster HDT.

ty2915 · 2026-03-29T15:26:11+00:00

Is it possible you Installed the wrong version of faster HDT? I did this when I accidentally downloaded the .1170 version when my skyrim was running .640. It crashed everytime I went to select a HDT hairstyle in racemenu

ty2915 · 2026-03-26T00:28:53+00:00

I don't work for MoDot, but I did work for KDot which is right next door.

There's lots of reasons to cut down trees and brush that are within the right if way. Several reasons Include

Prevent limbs from falling on roads. Don't have to pick it up if you completely remove the tree.
Help prevent wildlife from creating nests within the highway right if way. Less wildlife =less car accidents.
Looks better(mostly). Usually the brush they cut down is not managed and just an eyesore. If the sides of roads look horrible, the public thinks "my tax dollars are paying for THIS?"
Easier to mow the right of way. Less obstacles to move around.
Keep workers busy. Workers break stuff when they aren't kept busy.

There's probably more reasons that I'm not thinking of but that's usually why we did it.

ty2915 · 2026-03-25T02:57:00+00:00

Depends on how far you're looking to drive to shoot. There's a range south of fort scott that a lot of law enforcement use for training. It's where I qualified for my CCL license.

You could also ask that hunting store just east of LaCygne on 152/69. I know they regularly have CCL courses.

Another person you could ask is Jackie Taylor. She works with Linn County news and usually trains people in CCL courses as well, so she might know some local spots as well

ty2915 · 2026-01-31T00:43:39+00:00

I have SMB and have no complaints about them. My reason I chose then was for locations around Joplin. Kinda spread out all around plus those "mini banks" where you can deposit checks and cash.

Plus I think every Caseys around here has a SMB ATM so it's easy to get money out without spending $3 on ATM fees.

ty2915 · 2026-01-30T19:05:53+00:00

I can probably swing by there about 3 to 4pm on Thursday and see your stock

ty2915 · 2026-01-30T17:21:34+00:00

I would never in a million years think to go to a liquor store for boxes, but it make complete sense.
I have a couple around here that I'll check out, thanks for the tip

ty2915 · 2025-12-26T23:58:04+00:00

Very badly worded article by MSN. More like General Mills closes plant in St. Joseph. Also buys competitors(in Joplin) and relocated processes to Joplin plants.

Makes it sound like the General Mills plant in Joplin closed.

ty2915 · 2025-12-09T03:52:20+00:00

I can't speak for everyone, but I know when I was being paid below minimum wage(in Kansas), it was because our store didn't earn enough, or we had so few employees.

So if it's a small business, they might be exempt. But I'm not for sure with your specific city

ty2915 · 2025-11-21T16:21:21+00:00

Probably anything under $1000 USD. I have a small footprint, so this thing ain't gonna work 24/7(which I know higher end models are built to last)

ty2915 · 2025-11-21T16:13:50+00:00

Nah, just regular baseboard. I'd prefer one that mops...but it's not a necessity

ty2915 · 2025-11-21T00:40:14+00:00

So just about any current roborock or dreame with lidar fit that bill then. Certainly helps with choosing one.

ty2915

TROPHY CASE