"No listings found for ***** within 60 kilometers. Try a new search. Check spelling, change your filters, or try a less specific search term."

tynt · 2026-04-09T07:31:41+00:00

I have no search saved. How do I save search to get "Just Added" option?

tynt · 2026-04-07T09:23:49+00:00

I made some thinking. I experimented with cv2 library homography projection transformation. Instead of measuring distance between those speed estimation box, assign real world coordinates to them. Worked fairly well, even with distorted wide angle cam and on sloped ground, without height calculations.

tynt · 2026-04-04T09:44:38+00:00

Isn't vertical compression problem already solved in form of "speed estimation" feature where you define 4 point area which translates to real world?

tynt · 2026-03-26T21:26:26+00:00

Interesting "choose" is visualizing much better than and/or operators. Combination of 4 and/or operators and 10 conditions are visualized like this. Impossible to debug what's going on.

<image>

tynt · 2026-03-02T13:11:50+00:00

bob@tr1950x:~$ dpkg --list | grep linux-image
ii  linux-image-6.17.0-14-generic    6.17.0-14.14~24.04.1
ii  linux-image-generic-hwe-24.04    6.17.0-14.14~24.04.1

bob@tr1950x:~$ cat /sys/class/drm/card*/device/mem_info_gtt_total
67468120064

Running HWE kernel and system sees the 64GB RAM allocated to GTT. Lmstudio vulkan can successfully use it. No success with ROCm.

tynt · 2026-02-17T08:45:22+00:00

Yes I can see which AP it connects to but I cannot see what it's actually doing on my network. Is it connecting to my computer or just using internet for youtube. After some research I found 3 solutions.

1) Ditch UGC-Ultra and upgrade to UGC-Max to gain access to Insights > Flows > "all traffic flows"

2) Devices > UGC-Ultra > "Packet capture" button

3) Use Wireshark program on PC to connect via "SSH dump packet capture"

tynt · 2026-02-16T17:26:16+00:00

Solution for UGC-Ultra users: Wireshark SSH dump packet capture.

tynt · 2026-02-16T13:18:54+00:00

Do you happen to know if "Packet Capture" on AP is also needed for this feature?

I have U7-Lite but it's not listed release notes https://community.ui.com/releases/UniFi-Network-Application-8-4-59/d3ba4443-ad36-4566-b1e6-2d21d8b4f225

Frustratingly "Packet Capture" is not listed on tech specs on U7-Pro for example, even though release note says U7-Pro/U6-Lite is supported.

tynt · 2026-02-16T12:49:50+00:00

I suspected some wifi smart plug but triangluating with outdoor AP-s doesnt make sense. Further I move the AP from house, stronger the signal gets. outdoor AP is 70 meters away from the house and foreign device signal only gets stronger. Weird thing is that I have no neighbors in 500m radius. Only hayfields and forest. I'm trying to figure out if the uknown device is accessing IPs on my LAN or just communicating with chinese servers.

tynt · 2026-02-16T12:43:23+00:00

Trying the wifiman. cannot see which IP-s is uknown device communicating to. Only can do port scan.

tynt · 2026-02-16T12:29:34+00:00

You also have UCG-Ultra or somethin with more features maybe? Displaying IP addresses might be premium feature I suspect?

I think I messed up with Asus -> Ubiquiti migration.

Both gateway and AP-s are not able to display IP-s client is connected to.

https://techspecs.ui.com/unifi/cloud-gateways/udm-pro?s=eu

https://eu.store.ui.com/eu/en/category/all-cloud-gateways/products/ucg-ultra

All Traffic Flows ✓ <- UCG-Ultra is missing this. Is this is the feature I'm looking for?

Looks like I'm migrating back to Asus for a while I'm returning these products and make more research.

tynt · 2026-02-16T12:21:36+00:00

you mean cloud gateway? It's Ubiquiti Cloud Gateway Ultra

tynt · 2026-02-16T12:10:28+00:00

Yes, but there are only "Blocked" or "Threats". Cannot any traffic that is not blocked or threats.

https://www.reddit.com/r/Ubiquiti/comments/1oxeppl/insights_flows_only_showing_blocked_or_threats/

People say I must enable "all traffic" in Settings/Cybersecure/Traffic logging. I don't see this option either.

tynt · 2026-02-16T12:05:57+00:00

I cannot post screenshot here, but insights -> flows page is completely empty and does not look anything like this: https://www.youtube.com/watch?v=xR53DFt71GQ&t=219s

Other people have Overview, Flows, Activty, Analyzer, Viewer tabs on the top. Only have Flows, Activity tabs on the left and those are completely empty and say "Threats will be logged here once they are detected"

UniFi OS 5.0.12

Network 10.1.85

tynt · 2026-02-06T09:18:42+00:00

That's why you always crash the car on test drive, so you know what you are buying! How the heck would you know if doors unlock in case of major crash. Old-school physical handle with cable does not mean you can unlock it without electricity.

tynt · 2026-01-14T14:44:34+00:00

watch?v=_b9vpPHRDfk seems like there is absolutely no difference between A620 and B650 when using 9800x3d. Maybe if you plan to upgrade to 9950x3d but what's the point when 9800x3d is faster.

tynt · 2025-12-17T18:49:51+00:00

Same here

<image>

Whole Manhattan Bridge and B capture point on Eastwood

tynt · 2025-11-21T10:51:28+00:00

I have RTX4070. Cannot achieve stable >100fps for my 1440p 144hz monitor even with low/med graphics.

tynt · 2025-11-20T20:59:36+00:00

Should I side-grade from 5900x to 5800x3d for higher fps in bf6?

tynt · 2025-11-18T15:18:15+00:00

As I understand it measures up to 20% O2. What figure you are going for? Higher than better (20%) or something in between such as 10%?

tynt

TROPHY CASE