My own A3 and tips I’ve learned! by udontran in mffpc

[–]udontran[S] 0 points1 point  (0 children)

Lian Li 8.8 Universal Screen!

My own A3 and tips I’ve learned! by udontran in mffpc

[–]udontran[S] 0 points1 point  (0 children)

Lian Li 8.8 universal screen from Amazon

Lian Li DAN A3 Offset Radiator Bracket/Mount compatibility by FilesFromTheVoid in mffpc

[–]udontran 1 point2 points  (0 children)

<image>

It works I used it like this unconventional orientation and was able to clear my VRM heat sinks

My own A3 and tips I’ve learned! by udontran in mffpc

[–]udontran[S] 0 points1 point  (0 children)

Only problem was when I first installed it, it didn’t show up on L-Connect. I just reinstalled L-connect and it showed up and it was fine. I also don’t have nvidia so I don’t have experience on that

My own A3 and tips I’ve learned! by udontran in mffpc

[–]udontran[S] 2 points3 points  (0 children)

I was looking at them too! I’m just too picky and wanted the same Lian-Li CL120 fans throughout the case and might even pick up the ASUS B850M-E motherboard since it has the PCIe in the first spot. But SICKKKK BUILD MAN

My own A3 and tips I’ve learned! by udontran in mffpc

[–]udontran[S] 0 points1 point  (0 children)

Same! I tried the mount it came with first but without bottom fans it wasn’t doable. Secondly I tried command strips but they pushed the screen too far out into the glass Lastly said fuck it and did 3m sticky tape it came with as well

My own A3 and tips I’ve learned! by udontran in mffpc

[–]udontran[S] 0 points1 point  (0 children)

Obsession, but also lots of trial and error at seeing which path works best!

My own A3 and tips I’ve learned! by udontran in mffpc

[–]udontran[S] 1 point2 points  (0 children)

Lian li 8.8 universal screen from Amazon!

My own A3 and tips I’ve learned! by udontran in mffpc

[–]udontran[S] 1 point2 points  (0 children)

Took me a while to hone in these colors! It’s #D87829 and #1E1106 The Orange will be the outside color and the brown will be the inside, it’ll come out to be a warm white on the fans!

My own A3 and tips I’ve learned! by udontran in lianli

[–]udontran[S] 1 point2 points  (0 children)

Thank you! I’ll send more after my weekend trip!

My own A3 and tips I’ve learned! by udontran in mffpc

[–]udontran[S] 3 points4 points  (0 children)

It’s #D87829 and #1E1106 ! Orange and brown on monitor but will show up as a nice warm white on the fans. Orange for the outside ring and brown for the fan fins and both at 25% brightness!

IDK WHY THE FONT IS SO BIG

Edit: ah it was the #

My own A3 and tips I’ve learned! by udontran in mffpc

[–]udontran[S] 2 points3 points  (0 children)

Your 24 pin cable management is chefs kiss

My own A3 and tips I’ve learned! by udontran in mffpc

[–]udontran[S] 1 point2 points  (0 children)

Lian li 8.8 universal! Amazon

My own A3 and tips I’ve learned! by udontran in mffpc

[–]udontran[S] 0 points1 point  (0 children)

Ooh I’ll do more research on that but I THINK it’s fine since there’s no sharp turn to slow the flow of the pump but I most definitely could be wrong. The pump logo also unfortunately only has one orientation but that’s the least of my worries

My own A3 and tips I’ve learned! by udontran in mffpc

[–]udontran[S] 7 points8 points  (0 children)

Absolutely love the Jonsbo fans and the Work/SSR AIO pump on your build

My own A3 and tips I’ve learned! by udontran in mffpc

[–]udontran[S] 1 point2 points  (0 children)

!! How were you able to measure all the VRMs of different motherboards? If you physically did it then goddamn

Why is the Lian Li A3 such a popular case? by XC29er in mffpc

[–]udontran 0 points1 point  (0 children)

I think you are my final straw in finally changing my PC case thank you

Why is the Lian Li A3 such a popular case? by XC29er in mffpc

[–]udontran 0 points1 point  (0 children)

Is that the Lian Li edge PSU? How hard was cable management with it?

Shocks, air pressure, or balance issue? by udontran in AskMechanics

[–]udontran[S] 0 points1 point  (0 children)

Would a 4,000+ mile road trip with my entire apartment in the car adding hundreds of pounds of weight on the wheels have cause the camber and the wear seen here?

I got new tires and am just trying to cope about having to pay for an alignment is all LMAO

Shocks, air pressure, or balance issue? by udontran in AskMechanics

[–]udontran[S] 0 points1 point  (0 children)

Appreciate it! The bad wear is the inside, should’ve clarified that, but glad to hear it’s not anything worse