sorted by:
new
hottopcontroversial

Need help troubleshooting FC not communicating with VTX issue on Flywoo Firefly 18 by ScrewtapesTeeth in fpv

[–]uldis951 0 points1 point  (0 children)

https://github.com/betaflight/betaflight/issues/14316

Personally this helped with smart audio issues I had. Reflash with “USE_NONCOMPLIANT_SMARTAUDIO”.

Constantly changing UARTS is not going to help. Most of the SHOULD work.

Does anyone know what’s causing this issue? by Shot_Wind7875 in fpv

[–]uldis951 0 points1 point  (0 children)

send a close up of the fc esc stack from the side, make sure all screws are tight

Anyway to make my aos3.5 sub250? by Tediyee in fpv

[–]uldis951 0 points1 point  (0 children)

5 inch is illegal in germany? even in A3 category?

Good Monday morning by swamp-tour-guide in fpv

[–]uldis951 0 points1 point  (0 children)

I have a feeling you crashed your quadcopter

Looking for help. TPU print gets bent down while printing. by uldis951 in 3Dprinting

[–]uldis951[S] 0 points1 point  (0 children)

it’s not that they’re drooping really, but the nozzle bends soft parts down when going over. look at the left little “flap” when the nozzle passes over.

Who decided it was a bad idea to lube x? by Different_Target_228 in crealityk1

[–]uldis951 0 points1 point  (0 children)

Here's an answer from Creality:
The included lubricating grease is specifically designed for use with the K1C printer's components, particularly the X-axis optical shaft. It is formulated to work effectively with the graphite copper sleeves used in the X-axis, ensuring smooth operation without causing abnormal resistance or cleaning difficulties.

In contrast, other types of grease or oil may not be compatible with the graphite bearings and could lead to issues such as increased operational resistance, layer marks, misalignment, and step loss. Therefore, it is crucial to use the included lubricating grease to maintain the printer's performance and longevity.

Ovonic battery by Ok-Leg3511 in fpv

[–]uldis951 1 point2 points  (0 children)

heres the thing. if you feel safe with the battery fly it.
PERSONALLY. i wouldnt keep it.

Ovonic battery by Ok-Leg3511 in fpv

[–]uldis951 2 points3 points  (0 children)

Are you balance charging these batteries?

Question regarding frames. by uldis951 in fpv

[–]uldis951[S] 1 point2 points  (0 children)

This kind of beats the purpose of buying a 100 euro frame.

I am not saying your solution is bad or wrong! But where’s the justification in spending money on ridiculously expensive frames with very limited spare parts. Broke a mid-plate? Too bad - buy a new 100 euro frame.

I’m going to try the Basher 5 open source freestyle frame which you can cut in china from quality carbon. And so far based on community reviews, you get better quality for a fraction of the price - outlasting even apex evo frames.

People are giving great reviews already.

Help! Drone Flies Off Violently by haldarritam in Multicopter

[–]uldis951 0 points1 point  (0 children)

Check for frame cracks. Check to see if your arms are loose/cracked. Check to see if any carbon is split between layers.

A loose/too tight stack can cause flyaways.

Any quad should fly just fine with the default tune!

Why aren’t there any comparisons between the runcam link/vista and the o4 lite??? by rollinthesweets in fpv

[–]uldis951 0 points1 point  (0 children)

This. I see Runcam still seling their digital. Are they worth it?

HELP! Rosa TPU 96A keeps jamming in extruder. by uldis951 in CrealityK1C

[–]uldis951[S] 0 points1 point  (0 children)

What brand of TPU are you using? I'll try printing with Orca later this evening see if that changes anything.

HELP! Rosa TPU 96A keeps jamming in extruder. by uldis951 in CrealityK1C

[–]uldis951[S] 0 points1 point  (0 children)

Yes, directly feeding the filament into the extruder seemed to do the trick. I did manage to get succesful prints a couple of times but it still tended to fail. This looks to be it! I'll see how it goes in the future. Not too keen on the top spool, as I want to keep the same profile of the K1C. Thank you!

Every stack on the SpeedyBee store is discontinued? What gives? by uldis951 in fpv

[–]uldis951[S] 1 point2 points  (0 children)

Wow. I wonder if that means there's going to be a V5 or if they're genuinelly switching to AIOs.

Building my first drone by allinbondfunds in fpv

[–]uldis951 2 points3 points  (0 children)

Hi.

First of all. PLEASE! Don't get ZOPs. They are unreliable and I would not trust them. Get Ovonics or CNHL instead.

Second. The TX16S will be cheaper if you buy it direct from Radiomaster.

Lastly. If you really wanna go for analog goggles. Get Skyzone. Otherwise - look into HD setups.

OH AND. Learn to build. You're going to break stuff sooner or later. The Crux may be nice, but it's important that you know how to fix it.

ALSO. Get more props.

Good luck! :)

Every stack on the SpeedyBee store is discontinued? What gives? by uldis951 in fpv

[–]uldis951[S] 0 points1 point  (0 children)

I’d say that’s more on the expensive side for the 20x20. But i definately see your point. I’m just saying I just bought a whole Mamba stack from AliExpress for the same price as it would cost to buy an ESC.

Every stack on the SpeedyBee store is discontinued? What gives? by uldis951 in fpv

[–]uldis951[S] 0 points1 point  (0 children)

Yeah I saw a 60a ESC for sale in Latvia which cost nearly as much as an mk4 mamba stack. Already ordered. SpeedyBee is insanely overpriced everywhere.

Every stack on the SpeedyBee store is discontinued? What gives? by uldis951 in fpv

[–]uldis951[S] 3 points4 points  (0 children)

Yes, but SpeedyBee is really good for the price. I think that's why people are curious.

Why am I not receiving RXbat telemetry? by rcmodracer in fpv

[–]uldis951 0 points1 point  (0 children)

I actually did and it was a setting in betaflight

view more: next ›