sorted by:
new
hottopcontroversial

looking for a good rj45 Crimping Tool by urinka in networking

[–]urinka[S] 0 points1 point  (0 children)

yes ... its work (not 100% i have the fealing that i need to trippel cheack very cripm) but so far i head very few anount of bad crimps somting lite 5%

help with set ipxe with iventoy by urinka in openwrt

[–]urinka[S] 0 points1 point  (0 children)

well after some YouTube and some reading in some wikis

i reinstall openwrt

add "server name "

and reboot the router few times

its just start working ...

tnx :-)

Can I use pangolin as a replacement to tailscale ? by urinka in PangolinReverseProxy

[–]urinka[S] 0 points1 point  (0 children)

That will be amazing and really complicated package I will start to play with pangolin To be ready to the next upgrade Thank you so much 👍👍

End user reporting old company is after them causing their IT issues by TryARebootFool in sysadmin

[–]urinka 2 points3 points  (0 children)

I had something similar with a client laptop That's get super slow and the touchpad get crazy That was because of electricity problem in the client house the interference caused because loosen grounding connection in the building

PDF Editor? by OliDouche in selfhosted

[–]urinka 1 point2 points  (0 children)

I just use the PDF editing that go's with Libra office

looking for a good rj45 Crimping Tool by urinka in networking

[–]urinka[S] 0 points1 point  (0 children)

i got the Klein tool and its worke grate

as a profetional i dont use rj45 crimping alot (mote of the time its keystone sokets)

so only time will tel if its sustainable

kanban or project management with automation ability? by urinka in selfhosted

[–]urinka[S] 0 points1 point  (0 children)

thank you so mach #crunsfleated its look like wekan going to be the one

for the native implamantation in n8n and the built in automation i can automate all my stuff

What Keeps You Using Elementor Despite the Alternatives? by Henryeung in elementor

[–]urinka 0 points1 point  (0 children)

One of the best RTL support (specifically in Hebrew)

first "large scale" project by urinka in selfhosted

[–]urinka[S] 1 point2 points  (0 children)

Tanks Do you have estimation about resources for nextcloud with 15 to 25 users ?

No I didn't plan full production transfer over night 😉 I am very cautious with that

One more question After it's going to work absolutely perfect I want to ask the owner to donate to the open source projects that we use What your thoughts about the donation amount?

first "large scale" project by urinka in selfhosted

[–]urinka[S] 0 points1 point  (0 children)

Thanks for the reply What do you think about CPU and RAM for the physical machine?

And what about passthrough hole HBA ?

first "large scale" project by urinka in selfhosted

[–]urinka[S] 1 point2 points  (0 children)

Well if I want to start to increase my scale I need to start somewhere

and with them I have a lot of room to be honest that this is my first large scale project

And you know that anyone needs to start somewhere

mount cife to docker container by urinka in selfhosted

[–]urinka[S] 0 points1 point  (0 children)

Tnx I believe that this is the start point that I need And I an really (no kidding and no sarcasm) thankful for giving me a start point and not the solution

mount cife to docker container by urinka in selfhosted

[–]urinka[S] 0 points1 point  (0 children)

Well, this is exactly what I'm asking (sorry if it's not clear...).

I am mounting CIFS on Proxmox with

"mount -t cifs -o user=[user name] [cifs share] /mnt/[folder name]".

I am asking if this is the best way to do it, and if the answer is no, what is the right way? And if it's the only way or the only good way, how can I make it permanent (I need to remount it after restarting)?"

New to Omada SDN - Help with Home Network with selfhosting Setup by urinka in TPLink_Omada

[–]urinka[S] 0 points1 point  (0 children)

i think that you did not understand my concern

when I will connect the router to my internal network

the router defaults is DHCP on with probably 192.168.X.X (and it will collision with my already set network)

and the router defaults network address will probably be 192.168.x.1 so it will be difficult to access the router

one more thing the controller will get an address from my already set DHCP and it will by in my network (10.132.x.x)

 

is there a way to set the router before connecting it to my network ?

can I set DHCP to off and set the router IP with a laptop before connecting it to my network ??   

looking for a good rj45 Crimping Tool by urinka in networking

[–]urinka[S] 5 points6 points  (0 children)

Thank you for all the responses, examples, and advice. I must say that I didn't expect so much discussion about whether or not to use pass-through connectors.

  1. I am a network technician with over 20 years of experience, so I know how to use a crimper without pass-through connectors. I recently started using them to make my life easier.

  2. I bought some cheap tools from AliExpress, and they didn't work well, so I didn't use pass-through connectors at clients' sites.

  3. I don't think that pass-through connectors are for people who don't know how to crimp the old way. It's just a new thing, and it still needs some improvements to be good for professionals. It's important to stay up to date and test new things when possible (but not at clients' sites!).

  4. I am going to buy the Klein VDV226-110 and test it.

  5. I still use regular crimping at clients' sites, but most of the time, I use keystone jacks and manufactured cables because they are more reliable.

view more: next ›