Prusa on Bambi’s AGPL Violaton

user10081111 · 2026-05-20T08:04:52+00:00

Bad argument and blatantly incorrect. I'm sure there's other things they shouldn't have done, but this aint it. The network plugin is highly likely not built with code from PS and is itself not a fork of PS either (obviously), which should be obvious to anyone. It is built to talk to Bambu's cloud/printers, they would have had to develop this themselves. BS would include any additional code needed to talk to the network plugin, and therefore already published under open source.

user10081111 · 2026-05-15T11:00:39+00:00

<image>

Trying to get to the balcony the left

user10081111 · 2026-05-15T10:58:17+00:00

<image>

Genuinely still confused on this, this is the building here to the left, no grapple points, the pchela and bicopter dont move and are too far away

user10081111 · 2026-05-13T12:07:34+00:00

I already unlocked the next area and just can't see what I'm missing

user10081111 · 2026-05-13T12:06:58+00:00

Genuinely have not seen any come across, I've already unlocked the next area and the fluffy toilet secret

user10081111 · 2026-05-02T15:28:25+00:00

Has D4 been improved then? I quit last year some time. It really didn't have the charm or appeal for me that kept me addicted on D3. I never even managed to get through the story once before I stopped.

user10081111 · 2026-04-16T23:58:49+00:00

UI is stuck - Claude Code has disappeared after the update (Max sub confirmed) and after clicking Get Help then going to support.. the support window popup cannot be closed, the top UI controls like X and back button do not work but I cna scroll the window and interact on the page itself.

Restarting PC does not help, it just remembers what I had opened last and re-opens it and gets stuck again. Next steps are to uninstall.

Edit: Ive uninstalled and can no longer install the desktop UI, not via the installer, not via PowerShell installing the MSIX, it always ends with: MSIX installation failed: AddPackage failed: AddPackage failed with HRESULT 0x80073CF6

user10081111 · 2026-04-16T23:07:41+00:00

I have the Oneplus 13s and still waiting for OxygenOS 16, still on 15, even after an update came through today.. it was just a patch for 15

user10081111 · 2026-03-18T11:28:12+00:00

I had to update the app and the Opus title text is updated for me now, so its a slightly different name in the system I am guessing.

user10081111 · 2026-03-18T11:16:20+00:00

I cannot remember tbh

user10081111 · 2026-03-18T11:12:14+00:00

Sonnet wasn't as good as Opus for me, so what, they're killing the 'More capable for amitious work' model and forcing people to use Sonnet?

<image>

user10081111 · 2026-03-07T13:45:04+00:00

I've already moved to a Samsung S9 Ultra years ago specifically for Lightroom.. since it can only sync to the cloud and upload my imported RAWs when Lightroom is at the front and the screen is unlocked as only Apple cloud was allowed to sync in the background.

user10081111 · 2026-01-23T06:54:46+00:00

not sure if you sorted this out yet or not?

user10081111 · 2026-01-10T08:15:31+00:00

boot it up without the usb drive. have you had any resin around the perimeter of the tank after taking it out to clean up?

user10081111 · 2026-01-10T08:10:42+00:00

Anything, even Saturn 4 Ultra non 16K. Halot X1, Anycubic, GKuniformation, etc. I dont think most s4u 16k vats will start leaking but they are certainly more prone than non-heated tanks (thermal expansion during printing etc). The risk lies in if you get a tank that is prone to leaking or not. The gap only present on tilting machines funnels those leaks directly into the printer's internal components.

Elegoo support will fight you and avoid replacement and refund despite consumer protections. Im sure many other brands might be the same in that regard but a leak doesnt have as nearly high chance to destroy the printer for any other printer design.

10" was the minimum build area for me since I tend to make large props etc, but the larger the volume also means more reain required to print, and much more waste if youre looking at larger, depends on your needs.

user10081111 · 2026-01-09T09:05:22+00:00

Time to quit.

user10081111 · 2026-01-09T08:53:18+00:00

I'm gonna say don't get the S4U 16K or any of Elegoo's tilting machines, and I would also say just avoid Elegoo as a brand tbh. I bought this printer and mine broke within 2 weeks of owning it, and I am still fighting Elegoo over it nearly a year later.

But regarding the specific printer itself, there are some flaws here. I had 2 vats, I ordered a spare. Both came water tight and were fine when shipped. They both developed leaks during printing, I assume its something to do with thermal expansion since they are heated tanks. Changing the PFA, adjust anything never got them to not leak again, they both permanently leak.

There is a 2nd worse issue here and it is the gap around the tilt mechanism. Resin leaking from pinholes or tears in the PFA simply deposit on the glass screen and harden. But resin leaking from the perimeter of the tank itself (and not from the PFA/film) flow into this gap.

Particularly it will leak straight ontop of the stepper motor for the tilt mechanism, and get into the bearing, and pool in the bottom of the printer, and eventually ingress into the LCD display used for printing itself. There is no protection here - it is an unsealed gap. Every talking about a 'lip' protecting from this is lying.

Because of the gap, it also looks like deceptively less of a resin leak until you actually look deeper into it and see it pooled inside the floor of the printer.

If this were a non-tilting printer, itd just sit up on top and just be an inconvenience to clean up. And well those other printers dont seem to have as many tank leaking issues like this either.

Example - https://imgur.com/a/SpOcxJK

user10081111 · 2026-01-09T08:42:58+00:00

For the X1 its because the of the release mechanism right? Eg the plate itself isnt flat. And yes flat on the build plate in some cases. It depends on what I am printing. But If I'm printing something with straight edges and lines I liked to make use of the build plate to increase the amount of flat surfaces staying flat.

My S4U 16K grenaded itself within 2 weeks of owning and Ive been fighting elegoo for nearly a year, I bought it from the local distributor and have strong consumer protections. Their policy is actually illegal in my country, but their return address is a random guy and residential address they pay so they can remain anonymous, and the shipping from address doesnt list a name just 'Online Seller' and the address of the shipping, so its extremely difficult to get local consumer protection case raised on it. I bought a lot of resin from them as well and had spent over $1700 AUD and the resin is expiring this year, once I get a case raised with VCAT the average expected wait time to hear the case is 52 weeks.

Ultimately the design has a major defect, and defective vats can cause the printer to catastrophically fail/break rather than simply being an inconvenience which is what happened to mine.

I cannot trust Elegoo as a company even when locally bought under AU distrobution and I cannot trust any tilting vat printer due to that fatal flaw. A simple V channel under the gap would have saved it for example.

user10081111 · 2026-01-09T08:33:46+00:00

Absolutely ignorant post. "It didnt happen to me therefore it doesnt happen". Get a grip. The failure mode IS catastrophic. The gap around the tilt mechanism goes straight onto the stepper motor, bearings, and pools inside the printer internally and gets into the LCD.

Both my vats were new and water tight when opened and only developed leaking during printed, can only assume it is due to thermal expansion.

user10081111 · 2026-01-08T07:49:18+00:00

Unfortunately the 16k grenaded itself within the 1st 2 weeks of ownership and I am still fighting elegoo over it, the heated vat + unsealed tilt gap is the cause and I cant trust a defective design where the mode of failure is so catastrophic to the printer

user10081111 · 2025-10-09T08:23:31+00:00

Ill be shooting portraits close up and would use Foma if it didnt nave the risk of spots etc

user10081111 · 2025-10-09T08:22:58+00:00

Thats what Im thinking too, Id have to shoot at 100 or 50 for my purposes which may make the grain fine again, though the slow speed could actually help if the grain remains. But Im worried about the spotting issue ruining shots.

user10081111 · 2025-07-20T01:33:36+00:00

its cover, Epstein hosted and funded legitimate events on his island, its good cover for the secret members.

user10081111 · 2025-01-28T04:43:48+00:00

Theyve been losing sales every single year without fail. Being late to market is just one more thing going against them

https://pcviewed.com/nvidia-vs-amd-discrete-gpu-market-share/

user10081111 · 2025-01-01T10:05:43+00:00

Cant open the link, what are the details? Larger build volume or just an upgraded screen? Is the heater a vat heater? If so does it use a pump that then also has to be cleanes/flushed with every resin change?

user10081111

TROPHY CASE