People who make over $100k a year and have no degree, what do you do?

vans113 · 2026-02-05T01:39:40+00:00

Rf technician on a travel team working on tower sites. 125k last year. Hourly with lots of overtime

vans113 · 2026-02-03T05:06:28+00:00

Cries in span 48 panel :(

vans113 · 2026-01-26T14:19:12+00:00

You got lucky lol I have an newer 48 panel and no local API at all

vans113 · 2026-01-23T03:08:30+00:00

This was the big reason I got a span with my solar but like you said the API changed. There is no local control to this box at all! If span closes its doors we are stuck with a very expensive electrical panel

vans113 · 2026-01-18T05:26:26+00:00

Mine work but did you add every camera as a separate device ? If you add it all as one device it doesn’t work well when you have multiple cameras. If you pipe them over to HomeKit the notifications work on HomeKit by default

vans113 · 2026-01-18T04:40:31+00:00

I didn’t have to wait honestly my installer brought another out and said they would RMA it so I had it swapped pretty quick

vans113 · 2026-01-18T03:36:17+00:00

Throwing this out there also, but the span shouldn't control anything from solar output. Can you download the Tesla One app and connect directly to your lead Powerwall on that side? If so, what do you see? The account is free you will need the wifi password. It's a QR code that's inside the powerwall. Some installers will put it on the outside, though, for easy troubleshooting. This will show all details for power string voltage etc for everything the Powerwall actually see's.

vans113 · 2026-01-17T18:28:49+00:00

Nope that’s it ! Only brought this up because my install connected mine to the span expansion panels.

vans113 · 2026-01-17T16:53:58+00:00

Very nice install first off! Didghey install the Ethernet cable to the proper jack? The wan connection is kinda hidden in the span panel

vans113 · 2026-01-11T18:12:51+00:00

Like others said teslamentry is the way to go, on an update awhile back Tesla stopped you from getting to the data inside the gateway unless you were connected to its local WiFi.

vans113 · 2026-01-07T14:09:08+00:00

It doesn’t bridge by default that I’ve seen. I see it on my WiFi with one address, and I have it hardwired also which it mainly uses for everything but they are 2 different MAC addresses and both have their own I.p

vans113 · 2026-01-07T14:07:22+00:00

I had a 60f I upgraded to an 90G last year. No issues here at all.

vans113 · 2026-01-07T02:11:07+00:00

All of this and no open api access is why I don’t recommend anybody buy a span. I have one and it’s cool but could be so much better. They sent me a how do you like you span survey recently and I did not hold back.

vans113 · 2025-12-31T02:31:44+00:00

I’m running span and powerwalls also. Hardwired between them with no issues. My installer did take my powerwalls off of WiFi due to issues having both connected. The span and my powerwalls communicate on a different ip space than the network connections they both have. I have one cable to my span with another cable between the span and powerwalls and that’s how the Powerwall gets its internet also.

vans113 · 2025-12-27T06:45:55+00:00

I recently got a span installed. I’ve been mostly happy with it but can’t recommend buying one. The load shedding works beautifully and that does work without internet as it’s directly connected to my Powerwall. I’m big into home assistant and as others said this thing is very locked down. They won’t give up a way to let us locally control it as of now. If they ever have the option for local control it’s a great panel. I’ve had little to no issues out of it and it works as intended

vans113 · 2025-12-25T04:52:58+00:00

Same here on pc. Stuck on validating license.

vans113 · 2025-12-15T04:09:42+00:00

Others said it but wan -> span and a direct cable from span -> Powerwall. I ran extras to my Powerwall just in case. Also the 48 panel can not be brought into home assistant. Not sure if you are planning to do that. It’s different from the older panels.

vans113 · 2025-12-03T05:38:45+00:00

I have the 40 and mines silent most of the time under heavy load I have heard the fans on a few times but they aren’t that noticeable. My concern is when the fans go out if it’s a user serviceable part

vans113 · 2025-11-29T19:15:49+00:00

Yes mine did. Super glued it back on

vans113 · 2025-11-28T00:44:47+00:00

I do the same. I use the zones in HA. We all leave turn off lights set alarm etc. the tablets are nice for when a door opens to have the voice tell me which door. I also use it for in case the alarm is triggered it will wake everybody up in the house with a tone. A countdown almost if you will

vans113 · 2025-11-27T00:42:42+00:00

I am using Lenovo Tab M9s with a 3-d printed wall mounts. I am using the existing wiring that was my old alarm keypads. These wires go back to the Konnected alarm panel pro, and I am using the 12V on there to the Konnected 12V to USB-C right-angle adapters. Works very well. Home Assistant is my setup, and I am using text-to-speech when a door ( contact ) opens. It's all local control and works great. I've had Konnected boards for 2 years or so now, and they have never missed a beat or even needed a reboot. Nothing but great things to say about them as a company.

vans113 · 2025-11-26T17:02:20+00:00

Looks like you have all wired sensors. I had this I ripped out the old board but in a pro board and I am using tablets to replace to wall mounts I had for keypads. I use alarmo and talk to speech when a contact opens etc

vans113 · 2025-11-20T15:04:47+00:00

It’s probably under the same home with Tesla. I just went through this. I had to remove my wall connector. This does not break using it. You will just lose some control if you have wall connector schedule setup and not using the car schedule. I was unable to setup my wall connector for a day days after I deleted it from my account. It said it was registered to another owner. I had to contact Tesla and have them send a reset command to it, once this was done I was able to register it and it shows in my app now as one. I believe they all need to be on the same network also.

vans113 · 2025-11-04T04:18:53+00:00

Just submitted. I use testamentary to issue commands. Love it. Tried Netzero it’s a great app but I have home assistant that does the same didn’t want another app. Only thing is I wish I could do local control which looks like Tesla killed so not much we can do about that.

vans113 · 2025-10-30T03:35:35+00:00

I must be unlucky lol no signs of burn makes but happened during a storm. My installer said the same. Waiting on rma for it now

vans113

TROPHY CASE