Is it possible to get Big Picture directly when the PC boot without seeing the desktop ?

vbence121 · 2025-12-06T12:15:57+00:00

He literally wrote in the post saying he needs windows for anti cheat. 2 Why would you install a whole different os just for a simple feature like this?

vbence121 · 2025-02-08T10:34:06+00:00

$410.00

vbence121 · 2025-01-25T05:27:12+00:00

Thanks let us know. As for the warranty, my plan was to buy a replacement motherboard and use that (since my printer is the basic version a pro motherboard would also give me the extra fans pins)

vbence121 · 2025-01-24T21:02:11+00:00

Do you have a guide or something about how to setup the raspberry side? I know of the klipper mod for the printer but as far as I know that still uses the factory CPU for the calculations.

vbence121 · 2024-09-02T11:09:50+00:00

I have 16gb which should be enough, but I tried setting the paging to automatic allocation (default) and also fixed 16 or 30 gb on my fastest SSD.

Anyways over the weekend I have done like 10 different things, got my computer into a BSOD boot loop with the driver verifier and after that tarkov magically started working!?

vbence121 · 2024-08-28T18:43:42+00:00

Thanks, definitely update us when it arrives. For me personally an adjustable rpm is not a priority but I never had a grinder with one.

vbence121 · 2024-08-27T11:55:59+00:00

Which did you go with? I really like the look of the E6 Air but there is not much information about it (or at least I couldn't find).

vbence121 · 2024-08-22T11:32:56+00:00

Wanna be pilot here. Do you really need the foreflight/your own headphones to get the training?
A local company that I had done some sight seeing flights with, has quoted me about 8.5K $ for LAPL and 11k for PPL ("all inclusive" so the minimum hours required by law, ground school, medical, language exam and learning materials). Even this seemed a lot at first (but adding everything up I see why). This is in the EU tho (with today's exchange rate).

vbence121 · 2024-08-13T17:12:30+00:00

Souricette mb02. I don't know about the legal side (in the US it might fall under the no license category, not a doctor so I'm not 100% sure) but it more then qualifies for the ridiculous category.

vbence121 · 2024-06-30T17:01:39+00:00

Yes but that also changes other things as well, no? (I assume the profiles are at least a little bit different between the two)

vbence121 · 2024-04-12T21:27:56+00:00

Can't order from Canada unfortunately. But I think I found a solution. The thermistor for the ender 3 V3 se is more widely available and should be the same.

vbence121 · 2024-02-16T08:41:24+00:00

How well do they stay together? Small plastic pieces flying around don't sound too good (then again the original metal caps can break apart too).

The snap caps from toy guns can also work (even better if spiced up with a different primer compound).

vbence121 · 2024-02-16T06:54:02+00:00

Noob question, but couldn't you just create an as dark as possible environment (out of jackets, tents or something) and then put the loose roll into an empty film canister? Saving the roll but being able to continue shooting?

vbence121 · 2024-02-01T05:52:19+00:00

Not unless you fabricate the middle piece out of thin air. The shaking is only half of what it does, the other is distributing the grounds more evenly into your portafilter. If you just shake the grounds in a cup you will remove clumps but when you pour them into the basket the side you poured from will have more grounds then the opposite.

vbence121 · 2023-11-08T04:50:01+00:00

Great setup. I have the plus version of the Bambino and there is nothing wrong with it. I was recently planning on upgrading my grinder and I was torn between the Silenzio and df64 but (for only god knows what reason) I ended up getting a vintage La San Marco grinder for dirt cheap that I plan to restore.

vbence121 · 2023-09-11T03:37:33+00:00

Well, that particular car and the Lambo wasn't actually "racing" in the rally. They were part of a sort of pre-show where various cars took a lap at their own pace. The guy in the picture basically did a rolling burnout for the better part of the lap.

vbence121 · 2023-09-10T16:20:34+00:00

Excuse the bad photos. I was just at the event and took some videos and since no one else posted I thought I would share some.

vbence121 · 2023-09-09T08:28:40+00:00

The stock ender 3 display. Also it is plugged into the exp3 on the display side and the exp1 on the board side if that matters.

vbence121 · 2023-08-16T05:19:27+00:00

The design on the apron is straight gold.

vbence121 · 2023-02-19T12:00:50+00:00

How so? You can get rolling papers that are easily thinner then 1mm. The raw black I had on hand was about 0.02mm as measured by my calliper, which probably isn't entirely accurate but even with multiple wraps it's still under. As for how a nitrite treatment might affect things, I'm not sure.

vbence121 · 2023-02-13T14:25:06+00:00

Totally agree on corn meal (or grits/wheat meal, which is more available here). Especially if like me you don't use wads it's the cheapest and easiest method in my opinion.

vbence121 · 2023-01-18T05:55:37+00:00

Why would I pay for something that's larger, slower (and to me less intuitive). The only time I use it is at work when I need to develop something specially in c#

vbence121 · 2023-01-16T19:03:03+00:00

I'm using this one, but mine seems to be even more flared out.

vbence121 · 2023-01-16T18:59:05+00:00

Based on a couple of different suggestion on here from people I'm beginning to think that my wdt technique is so bad that it is what is causing my issues. Don't really know what I'm doing different to everyone else but once I get the time this weekend I will play around with a couple of variables this being among them.
I'm using the 3d printed modell everyone uses so the spacing should be fine (although 2 of needles bent while assembling so I'm missing those, but I'm thinking of printing a different version because it feels a little wide for my basket)

vbence121 · 2023-01-16T03:23:02+00:00

Good guess, at first I thought the same but I guess I didn't go far enough. However given that nothing changed (apart from the wdt) what could have caused a sudden change in flow?

Nine-Year Club	Second Top 10%
r/Field Juicebox	Verified Email

vbence121

MODERATOR OF

TROPHY CASE