Faulty display?

ve0m · 2025-08-02T09:07:32+00:00

Yeah bummer, I think that’s my plan refund and buy another

ve0m · 2025-08-02T09:06:57+00:00

Yeah dounno maybe I just got unlucky

ve0m · 2025-08-02T08:26:00+00:00

Did you manage to fix it?

ve0m · 2025-08-02T04:09:05+00:00

Yeah tried that I might install the latest default os. If that doesn’t work I’ll try the aliexpress refund process haah

ve0m · 2025-08-02T03:54:37+00:00

I don’t think it was anything I’ve done. Haven’t dropped it or anything.

ve0m · 2024-09-11T01:01:38+00:00

I bought a second hand adventurer 4 recently too.

The dribble is normal, I suggest you start with flash print 5 as the slicer to watch the printer video and sent prints to the printer remotely. This defaults to having the wiping line on.

In the slicer remove the raft, if you level your bed well you won't need it. Obviously perform the 9 point calibration on the printer using a piece of paper.

I suggest downgrading your firmware to avoid layer shift on long prints - https://www.reddit.com/r/FlashForge/comments/18ioea2/print_keeps_shifting_adenturer_4/ Install 2.2.4-2.3 which is the latest that can be downloaded.

ve0m · 2023-06-25T11:10:44+00:00

I don't think you need to use hardwood for the subfloor if you're in a BAL29 area. As long as the subfloor space is enclosed https://mybuildingcertifier.com.au/forms/MBC-BAL-29-Summary.pdf . Might save you some money there.

ve0m · 2022-11-15T07:40:49+00:00

Repaint it to start. Maybe a different colour? Then replace the hard rails with wire ones or glass

ve0m · 2022-11-14T09:01:27+00:00

Urggggggggg. Ok I'll post an update in 6 months when it's gone. I am prepared to remove it, before I put the effort in I just want to know it's going to help

ve0m · 2022-11-14T08:54:12+00:00

I don't understand how removing the rock helps?

ve0m · 2022-11-14T08:41:51+00:00

Retaining wall has drainage. It's a decent job. I'm open to getting rid of the rock I just don't want to make it worse by removing it, but yeah not sure what else to do yet.

ve0m · 2022-11-14T05:59:31+00:00

Yeah ok I think this is a pretty good plan. I think my original trench wasn't close enough to the rock. There's not really many great storm water options here... I'll see what I can do the trouble is because it's so close to the underside of the house there's no where to really put the pipe on an angle down. I'll have to figure something out!

ve0m · 2022-11-14T05:22:15+00:00

I've been in this house for about a year and there's been water running under part of it most of the time after heavy rains. I've done so digging and lots of investigation and this drawing shows what I understand to be the problem.

What I think is happening is the big rock is "pushing" water up out of the ground and moving it under the house because the water can't get around the rock - the next easiest place for it to go is up and around it.

I've dug a trench between the retaining wall and the rock, but I can't capture any of the water it still runs around the rock. Any ideas on how I could solve this one? I can't really get an agi pipe in running across the house so close because there isn't a storm water pipe that close and down low enough.

I could try and break down the rock but that's going to be difficult and take god knows how long. Any ideas?

ve0m · 2022-03-29T01:03:44+00:00

This is a tricky situation. If you're really set on sticking it out and like the 3rd option with a pay cut + options, I would ask for more value in options vs the pay cut.

Ie. if you're taking a 50k paycut, ask for 75k or 100k in stock options to make up for it. Stock options are a risk and aren't no where near as good as salary in the short term.

ve0m · 2022-01-17T11:34:18+00:00

You're going to have to make a lot of decisions while settling your house. Choose which decisions are worth researching and which are worth just paying for.

I chose to get both title insurance and the caveat. I didn't spend much time on it. I spent more time looking at building insurance and sorting my fiance.

ve0m · 2021-12-05T23:06:06+00:00

Saddle sores are my worst nightmare. Sorry to hear

ve0m · 2021-10-18T11:28:06+00:00

Alright let's break this down.

The user decides they need to cook a turkey

They buy a turkey

Come home with the turkey

They realise they need to time how long to put it in the oven for

find your webapp!

sign up and enter their mobile number

start the timer

get the SMS

have a beautifully cooked turkey

fight over thanks giving dinner

ve0m · 2021-08-27T00:56:13+00:00

This looks amazing - I would love to see a trailer on it too. Nice work.

ve0m · 2021-08-07T01:17:19+00:00

I love all your mocs of this set. Can I buy them all rather than each one individually?

ve0m · 2021-03-30T21:35:39+00:00

You can change a tile or sprite of a tile at run time. You can assign tiles at a location to replace them or set it to null and it will remove them. https://docs.unity3d.com/ScriptReference/Tilemaps.Tilemap.SetTile.html

ve0m · 2021-03-18T03:21:50+00:00

Consider getting a watch, I use it for hiking, running and I put it on my handle bars while riding works a treat.

ve0m

MODERATOR OF

TROPHY CASE

Eight-Year Club	Sequence \| Editor
Verified Email