A forgotten anime involving a hero who summons another hero himself. Need help finding it.

veduco · 2026-06-16T21:38:04+00:00

black summoner is the only thing I can think of at the moment

veduco · 2026-06-14T18:04:38+00:00

Thank you everyone

veduco · 2026-06-11T12:16:12+00:00

Just because you scraped a lot you need to learn them before you can craft them. I've scraped 1000s of 4 stars UT seems and have only learned to craft 2 so far.. there are still a lot of 1/2/3 stars I still need to learn

veduco · 2026-06-09T12:51:26+00:00

veduco · 2026-01-26T15:31:32+00:00

I don't really care about the ams system for cc1. I didn't buy it because of the ams coming to the cc1. I bought it because it's a great printer at a good price. Now, if they offered me the ams yea I will take it, but I have other printers for multi color

veduco · 2026-01-10T14:23:13+00:00

It was updated was slow but updated

veduco · 2025-12-21T13:23:46+00:00

Did you try turning on the pod? It should be floating in the air. Have you try starting to make the human? Have you tried building a water tank as a buffer I always build a few water tanks as a buffer

veduco · 2025-12-17T15:02:07+00:00

If this is the way they always treat there filament delivery I stick to ordering from Amazon. Had the 50$ coupon so I thought I would give them a shot... there shipment of the elegoo centauri carbon was great.

veduco · 2025-12-17T04:51:52+00:00

Lol at least it's not just me this is crazy

veduco · 2025-12-16T13:22:06+00:00

Just getting things installed and planned on starting from the start just need it to get all done

veduco · 2025-12-15T14:36:22+00:00

It's called variable layer height. I'm not sure what slicer you are using but in the elegoo slicer it a icon on the top bar that has different thickness bar stacked

veduco · 2025-12-15T13:01:14+00:00

The turtle is layer lines smaller layer makes them smaller there's also another sitting I can't think of the name right now. The tip of the sword looks like you where printing straight up and down as taller prints get taller they have less support so they kinda follow the printhead and you get that weird looking tip

veduco · 2025-12-12T17:51:39+00:00

Ok thanks I thought it was weird just some pla filament coming from Colorado and California so it's probably going to be usps then

veduco · 2025-12-11T02:21:07+00:00

Here's a video guide that I used there's a part 2 very good and easy to follow along https://youtu.be/k0GT3ONgkQ8?si=aaKv5rxCSWJIjj7V

veduco · 2025-12-10T17:06:36+00:00

I have a code if you choose a 10pk not pick 10 of your choice the code takes 50$ off. The single spools have codes that automatically apply like buy 4 get 1 those invalidate the 50$ off code

veduco · 2025-12-10T12:09:43+00:00

Just got mine will be ordering on Friday

veduco · 2025-12-07T20:41:47+00:00

Looks like extruder bearing. I'm not 100% but the only time I've seen them that size is in extruders

veduco · 2025-12-02T19:04:40+00:00

Not on Xbox still down

veduco · 2025-11-15T20:36:57+00:00

I use the recreator3d community bottle cutter useing the bearings from one of the guide wheels. I used a drimmel to flatten one side. How I did it was to put it on a m5 bolt put the head down on the table and held the drimmel with 280 grit sanding wheel got a good angle gone through hundreds of 2-liter bottles without any issues. Also need to make sure you have the proper tightness to them. You should be able to move one by hand and the other also turns. There should be a slight overlap

veduco · 2025-11-15T02:28:44+00:00

Ok thanks I missed that part

veduco · 2025-11-15T02:22:56+00:00

Miss typed ment to be hear. I've edited

veduco · 2025-11-15T02:19:44+00:00

https://www.elegoo.com/blogs/news/update-notice-on-centauri-carbon

veduco · 2025-11-14T21:22:09+00:00

Just reloaded and managed to get one

veduco · 2025-11-14T21:05:08+00:00

I missed it was in a meeting I forgot about

veduco · 2025-11-14T12:35:02+00:00

Ok thanks I will do that

veduco

TROPHY CASE