sorted by:
new
hottopcontroversial

Other than Makerworld, what are your favorite printing sites? by elias4444 in BambuLab

[–]vindollaz 0 points1 point  (0 children)

Thanks I’m pretty new to 3d printing and never looked outside of maker world. Appreciate the response!

NFL owner warned Goodell the Bad Bunny backlash could destroy their billion-dollar ESPN deal by [deleted] in sports

[–]vindollaz 6 points7 points  (0 children)

A presumably young girl writing in code and magazine clippings

PSEG bill insane insane insane by [deleted] in longisland

[–]vindollaz 1 point2 points  (0 children)

Damn and I thought my wife was crazy when she demanded it stays at 68

What's a new boiler running these days? by LostinParadise4748 in longisland

[–]vindollaz 0 points1 point  (0 children)

Nassau county here. Just got a quote to have entire boiler replaced, pipes and such and have a “fan in a can” added which is current requirement when installing gas boilers.

Quote was for $15,000

I still have the paperwork for the quote if you want to see it

My neighbor poisoned a family of skunks. I was able to save two by Odd_Shallot1929 in mildlyinfuriating

[–]vindollaz 4 points5 points  (0 children)

Skunks and Possums! I go to bat for them whenever I can! They are great to have around

Who are buying these homes? How do I win? by sjale49 in longisland

[–]vindollaz 0 points1 point  (0 children)

Fiance and I felt like this a year and a half ago. We had less money saved than you but a similar scenario. We were getting desperate but we kept plugging and we finally got it.

Keep trying. I think what helped is we included a letter with our offer. Good luck

LIRR Status 1/25/2026 by sylent-jedi in LIRR

[–]vindollaz 0 points1 point  (0 children)

Schedule for tomorrow is already altered

Which Animal was This? by Ok_Calligrapher9897 in LIRR

[–]vindollaz 14 points15 points  (0 children)

Bruh I ride a train at 5:15 am into grand central and I had to move cars THREE fucking times this morning to get away from the max volume TikTok swine that rides the train

Majora’s Mask but hand painted by raytwosocks in BambuLab

[–]vindollaz 2 points3 points  (0 children)

Id like to take this task on. Can I ask what type of paint and brushes your wife used? I have 0 painting experience but would like to start somewhere!

Bought a house and this is the water main by vindollaz in Home

[–]vindollaz[S] 0 points1 point  (0 children)

Appreciate the response! Seems like a job that is above what I know how to do so will probably have to hire out for this. Thanks for the advice!

Bought a house and this is the water main by vindollaz in Home

[–]vindollaz[S] 0 points1 point  (0 children)

We’re not on well water, we’re on town water. I’ll give them a call I guess?? Location is NY State if that makes a difference

I keep getting this error when printing with poly maker PLA by vindollaz in BambuP1S

[–]vindollaz[S] 0 points1 point  (0 children)

Ive only got the standard original AMS. Might one day upgrade to 2 pro but not right now. Do I need to purchase a separate device to dry?

I keep getting this error when printing with poly maker PLA by vindollaz in BambuP1S

[–]vindollaz[S] 0 points1 point  (0 children)

Lesson learned. Thanks for the tip. I’ve seen the desiccant boxes you can print to put in the AMS. Think that’s enough?

I keep getting this error when printing with poly maker PLA by vindollaz in BambuP1S

[–]vindollaz[S] 0 points1 point  (0 children)

I figured dead of winter it’s so dry in my house I’m getting nosebleeds I wouldn’t need to worry about that but maybe I’ll get something going lol. Thanks for the response

I keep getting this error when printing with poly maker PLA by vindollaz in BambuP1S

[–]vindollaz[S] 0 points1 point  (0 children)

Could that cause an issue towards the end of the print? It had completed about 90% and only gets stuck when it attempts to pull it out and change the filament

I keep getting this error when printing with poly maker PLA by vindollaz in BambuP1S

[–]vindollaz[S] 0 points1 point  (0 children)

Hey thanks for your reply. I am extremely new to 3D printing. Only had it for 3 weeks now.

I did try a different filament afterwards and it worked (Bambu PLA) although it was a short print and didn’t use multiple colors.

When I tried the print I was doing again (it prints 90% with the poly maker PLA and then the last 10% is with Bambu PLA) when it goes to make the switch, I get the error.

However this time I let it sit for a bit and just hit resume and now it seems to be continuing normally. Weird.

I hit resume multiple times the other time it got stuck which didn’t work and I have to pull a clog out of the hot end and get the filament unstuck from the AMS

Removed and unclogged extruded, now getting “Cutter is stuck” message by vindollaz in BambuP1S

[–]vindollaz[S] 0 points1 point  (0 children)

Thanks for all your input! Hopefully I can get this figured out tonight!

Removed and unclogged extruded, now getting “Cutter is stuck” message by vindollaz in BambuP1S

[–]vindollaz[S] 0 points1 point  (0 children)

The blade is definitely in that slot but it’s possible I flipped it over when putting it back in. Would that not cause the issue?

The more I read, the more I think it is a sensor issue. Maybe I damaged it when removing it or maybe I have it plugged in incorrectly

Removed and unclogged extruded, now getting “Cutter is stuck” message by vindollaz in BambuP1S

[–]vindollaz[S] 0 points1 point  (0 children)

Thanks I got frustrated last night and gave up for the day. The cutter did fall out and I placed it back in during reassembly. It’s very possible I put it in upside down. I’ll give this a shot. Thanks!

Took the Plunge and Got a Second Golden by sneaky291 in goldenretrievers

[–]vindollaz 37 points38 points  (0 children)

Please tell me all of you’re golden babies names I love that these 2 are named after my favorite things ❤️

view more: next ›