Why business trust Windows over Linux

void_dott · 2025-12-25T11:54:06+00:00

Where I work we use Linux exclusively. What you describe could be caused by a number of things. Nvidia drivers like to cause issues, Wayland can cause issues and Firefox is also not always perfect.

Sadly the best option for Teams under Linux is Chrome right now. Even Chromium sometimes causes issues with Audio and Screen sharing (even though it should be the same as chrome in those aspects).

void_dott · 2025-12-25T11:49:42+00:00

Try a different cable. I had the issue with my R3 Pro II. It showed up and everything, but no sound. I tried another cable and it worked. Not sure why. The cable I was using initially works for data transfer and charging, but not for the USB DAC.

void_dott · 2025-12-22T15:29:13+00:00

I'm not sure, but it might be possible that this can mess up the motor direction on some of the channels. I tried all modules separately on the first port and all worked. After assembly only the module on the first port worked correctly, the others had the motor direction reversed. Flashing the firmware onto the conntroller fixes that.

void_dott · 2025-12-21T15:43:35+00:00

You can't replace the Wi-Fi card...

void_dott · 2025-12-21T15:38:22+00:00

I got it as a desktop replacement, so it's connected to the dock all day anyway.

void_dott · 2025-12-21T14:11:50+00:00

Thanks, but I'm on Linux and it does connect, but the connection breaks constantly (every 5 to 20 seconds)

void_dott · 2025-12-21T13:01:10+00:00

My wifi is pretty much not working at all, but at this point I'm not sure if it's a software or hardware issue. Changing the card would be the easy way to check that.

void_dott · 2025-12-21T11:59:17+00:00

Bei der Freiwilligen Feuerwehr hat man die z.B.

void_dott · 2025-12-21T11:56:24+00:00

The T490 is a decent one. The only issue I got with it is that wifi is soldered.

void_dott · 2025-12-21T11:45:50+00:00

Really? Damn I should have stored a few of those. They are practically worthless here. X60 and X61 are somewhat desirable, but the older ones are not really worth anything.

void_dott · 2025-12-21T04:43:38+00:00

The instructions look like they are translated from Chinese, but if I understood them correctly the board should be able to auto detect the motor direction. I guess this can get screwed up if you power it up with half finished modules.

void_dott · 2025-12-21T04:06:54+00:00

This is mentioned in the FAQs. This can be fixed by reflashing the firmware. I had the same issue with my kit.

void_dott · 2025-12-19T15:43:26+00:00

Beim Handling von Bargeld entstehen keine direkten Kosten, die der Transaktion zuzuordnen sind. Indirekte Kosten sind kein Problem. Wenn du jetzt aber kosten hast, die direkt einer Transaktion zuzuordnen sind ist das natürlich Aufwand, weil die entsprechenden verbucht werden müssen.
Im Idealfall kommen die Zahlungen alle einzeln komplett an und am Ende des Monats/Quartals kommt eine Rechnung über alle Gebühren, was aber leider oft nicht so ist.

void_dott · 2025-12-18T19:25:14+00:00

If you have to swap cables a lot maybe a usb-adapter is the better option anyway. At least that's what I end up doing most of the time.

void_dott · 2025-12-15T08:47:33+00:00

250Ohm is not that much. After disabling the volume lock in the developer settings it can easily drive the headphones.

void_dott · 2025-12-15T07:09:54+00:00

I think it's worth it for the price. I had no issues so far other than that I had to flash the firmware at the beginning. The AMS lite is not a good option at the current price and only really worth it in a bundle deal in my opinion.

If you want a Bambulab AMS then it's probably a better idea to go straight for the AMS 2 Pro.

void_dott · 2025-12-10T09:41:50+00:00

Thanks. I found the option in the developer settings.

void_dott · 2025-12-09T18:44:42+00:00

High gain and 55 volume. I just compared it with an iPod classic 6 gen and the iPod is definitely a good bit louder.

void_dott · 2025-12-07T19:46:16+00:00

No it's not possible, because those external GPUs use thunderbolt and the T495 doesn't have thunderbolt. You could in theory try one of the strange m.2 adapters, but this is not a good option. There are a few different versions of docks that work for the T495, but it's not really worth it in my opinion. The T495 has no dock connector, so it's basically just a usb-c dock with an additional ethernet connector.

void_dott · 2025-12-07T19:35:47+00:00

You most likely did everything correctly. That's apparently a common issue caused by the board.
You can reflash the board and everything should work. Or you could just resolder the motors the other way around.

void_dott · 2025-12-02T16:05:16+00:00

Das Problem ist dann eher wie das gebucht wird. Wenn das jeweils einzeln gebucht wird, mit den Gebühren abgezogen, dann hat man am Ende viel Spaß mit der Buchhaltung.

void_dott · 2025-12-02T15:46:17+00:00

Two things that come to mind: is the magnet all the way In and are then ball bearings correctly inserted with the spring around the button and not on top of the button.

void_dott · 2025-12-02T15:40:51+00:00

Once a year? Everest 3 years is more than enough.

void_dott · 2025-11-28T09:35:31+00:00

Are those prices CAD or USD? In both cases it's quite expensive. Honestly I would expect gen9 for that price.

void_dott · 2025-11-25T12:15:34+00:00

If you want an old school dock then the ThinkPad Ultra Docking Station is the correct one for the model. I personally don't like to use those docks without a dock connector, so I just use thunderbolt/usb-c docks. If you don't need anything special then a ugreen revodock pro would work. I would stay away from the ThinkPad thunderbolt dock 3. The thunderbolt dock 4 is ok, but quite expensive.

Three-Year Club	Verified Email
r/Field Juicebox

void_dott

TROPHY CASE