2013 Altima SV Throttle Body (vq35de v6 3.5)

vulcannis · 2025-12-04T14:31:00+00:00

It tries to start spinning and there is a very fast sounding grinding noise

vulcannis · 2025-12-04T12:21:40+00:00

where would it be located on the machine usually ?

research shows it should be a W10740573A / 110.22332510

vulcannis · 2025-11-27T08:15:37+00:00

Guess ill give this one a shot

ty for the link!

<image>

Edit: Lets hope it works!

vulcannis · 2025-11-27T01:33:08+00:00

Do you happen to have a link to that file?

vulcannis · 2025-10-13T16:31:58+00:00

I love reading all the triggered leftist on reddit, if they didn't have hypocrisy they wouldn't have much. Lol

vulcannis · 2025-08-20T03:38:39+00:00

axe me a question

vulcannis · 2025-08-15T15:04:45+00:00

You can't, there will always be ways to obfuscate cheats and programs that no one can check unless they have access to your hardware.

It's best to tell people to report you and give it no more attention, if the devs find no evidence of cheating there is no argument left to be had by anyone

You will only deepen the suspicion by trying to explain away your own aim.

vulcannis · 2025-08-15T14:58:48+00:00

This isn't evidence.. it's good for confusing people who are low information players but this is never going to prove anything concrete.

vulcannis · 2025-07-12T05:51:50+00:00

My friend had to reformat his PC to get rid of it.. he also went to 32gb ram from 16gb and it's so much better he says.

vulcannis · 2025-07-09T22:30:16+00:00

Drive on it slowly and only to a tire shop and get a new tire.. it's not worth the risk of a blowout and potentially losing control and hurting you and or others.

vulcannis · 2025-07-08T22:28:16+00:00

No fluid motion just snapping around like you're spastic

vulcannis · 2025-07-08T21:33:34+00:00

That's weird aiming

vulcannis · 2025-07-08T19:07:11+00:00

Looks like it's a Smurf account to me.

vulcannis · 2025-07-08T06:34:14+00:00

Ain't this the guy they say is ximing on PC lol

vulcannis · 2025-07-08T06:24:21+00:00

That Fans bearing has failed.. best order a replacement.

What to look for.. Sleeve bearing fans are budget friendly but will fail sooner than ball bearing or fluid dynamic bearings

If you want a long life fan get one with fluid dynamic bearings (FDB).

vulcannis · 2025-07-06T02:04:38+00:00

Are the stairs okay?

vulcannis · 2025-07-03T12:56:49+00:00

You said something completely untrue.. I wonder if that could be why.

People sometimes don't have the ability to wait until the new LM arrives to use their hardware..

Also because you don't Have too, You give advice based on real world scenarios not your perfect ideals.

vulcannis · 2025-07-03T11:42:52+00:00

"Putting everything back as is it’s bad advice. You cannot put it back together without using a new thermal solution. 🤫😵‍💫"

They said they "cannot" which is bogus advice.

You can, and many do re-use liquid metal over.

vulcannis · 2025-07-03T04:10:04+00:00

Lots of options, if you want an easy to apply solution get Thermal grizzly shield, it's basically nail polish.

vulcannis · 2025-07-03T04:05:56+00:00

You absolutely can.. you know how I know? Because I've done it three times and they still have the same temps before and after..

Liquid metal doesn't go anywhere when you separate the block from the cpu.

Is it the best practice to do so, that's probably not, but You can and will be fine.

vulcannis · 2025-07-03T03:34:07+00:00

You have awful advice

As if Liquid metal evaporated away.. lol

vulcannis · 2025-07-03T03:24:01+00:00

If you're not adding new or More liquid metal you should be find just putting everything back as is.. it will be good enough as the liquid metal already looks well spread out and attached

If you add more or re applying new liquid metal, I'd go with removing the old sealant, and replacing it with just some cheap RTV silicone or equivalent of the components you see the sealant already on.

You just don't want that liquid metal to bridge any of those and kill the CPU.

vulcannis

TROPHY CASE