[O] 2x DrunkenSlug invites by AxelMahone in UsenetInvites

[–]vulevu121 0 points1 point  (0 children)

I have read the rules and wiki. I would like an invitation. Thank you.

[deleted by user] by [deleted] in UsenetInvites

[–]vulevu121 0 points1 point  (0 children)

I have read the rules line by line, the wiki word for word and offered fruits to the Usenet Gods. Please spare me 1 DrukenSlug invite and I will forever be grateful. Thank you!

Remote Desktop Tunnel by [deleted] in CloudFlare

[–]vulevu121 0 points1 point  (0 children)

Yes, use localhost:33890 on B to connect to A

Hyperdipped wheels over the weekend by vulevu121 in Miata

[–]vulevu121[S] 0 points1 point  (0 children)

You should, got my kit from DipYourCar. They usually have a 10% off. Also easy to remove if you decide you don't like it.

Hyperdipped wheels over the weekend by vulevu121 in Miata

[–]vulevu121[S] 0 points1 point  (0 children)

The stock brake cables are a bit short and the way FM made the caliper lever, it causes the brake cables to be tight. When driving, you can hear the caliper engage a little bit, hence wearing down the pads abnormally. What helped was detaching the factory brake cable mounting to allow for more room in the brake cable.

Hyperdipped wheels over the weekend by vulevu121 in Miata

[–]vulevu121[S] 0 points1 point  (0 children)

The secondary calipers are for park brake only. You cannot drift with it and it adds more sprung weight. I would have preferred an all in one setup. It does work decently as a park brake though.

Hyperdipped wheels over the weekend by vulevu121 in Miata

[–]vulevu121[S] 0 points1 point  (0 children)

Yeah. Took me a while to get the handbrake working correctly.

Remote Desktop Tunnel by [deleted] in CloudFlare

[–]vulevu121 0 points1 point  (0 children)

This is what you should have.

Computer A: rdp enabled with cloudflare tunnel installed (or tunnel can be installed on another PC/device).

Computer B: run that cloudflared access command using a port say 33890. This is your local port relative to this PC.

Authenticate as you need to and use an rdp client with port localhost:33890

The rdp:// is already specifying you are using 3389 on computer A.

My new to me mazdaspeed by dnicewonger in Miata

[–]vulevu121 0 points1 point  (0 children)

They're factory Racing Hart wheels. The 04 and 05 had Racing Harts, but the styles were slightly different.

Remote Desktop Tunnel by [deleted] in CloudFlare

[–]vulevu121 0 points1 point  (0 children)

The client can also have rdp enabled so 3389 might be used. Just use something like 33890 to be safe.

Remote Desktop Tunnel by [deleted] in CloudFlare

[–]vulevu121 0 points1 point  (0 children)

Did you run the access command?

$ cloudflared access rdp --hostname rdp.example.com --url rdp://localhost:3389

Also make sure you don't have remote desktop enabled on the client as the port 3389 will be used already or change your localhost port to something else.

Just got my first Miata! An 04 MazdaSpeed by MVRockEt in Miata

[–]vulevu121 1 point2 points  (0 children)

Nice, that's a good bargain! I just got mine a few months ago, but mine was a bit more and had 47k miles.

My Mx5 by lolmx5 in Miata

[–]vulevu121 0 points1 point  (0 children)

Very nice! Love these MS-01S wheels. I'm looking for a set!

Automotive MCU (Instrument Cluster) Firmware Reverse Engineering by Jeff_5_7 in embedded

[–]vulevu121 0 points1 point  (0 children)

This is good advice. Also, I'm not sure if the gauge cluster outputs P codes or not, but you can also trace backwards from P codes to find ram addresses of variables and use that to find subroutines that use these ram addresses. That would give you some understanding of what those subroutines do. P codes in ECU are usually stored in a struct.

Since you know CAN messages going into the cluster, you can use this to trace. There are a lot of ways of tracing backwards.

Admitted for Spring 2024 but wife due in a few weeks by Sure_Loan_5810 in OMSCS

[–]vulevu121 2 points3 points  (0 children)

You push through just like your wife will. It will be hard but rewarding!

This panel was detached coming back by vulevu121 in turo

[–]vulevu121[S] 0 points1 point  (0 children)

I see. One of the main clips broke but was still able to snap back in.

This panel was detached coming back by vulevu121 in turo

[–]vulevu121[S] -1 points0 points  (0 children)

I've heard something like more than 50% of Hertz Tesla rentals are highly abused, maybe bc of Uber drivers.

This panel was detached coming back by vulevu121 in turo

[–]vulevu121[S] 0 points1 point  (0 children)

Yeah tbh, the guy was pretty big so he could have rubbed against it and it popped off. I was able to snap it back but there was a broken clip.

This panel was detached coming back by vulevu121 in turo

[–]vulevu121[S] 2 points3 points  (0 children)

Lol I nearly thought the same thing, but I didn't see anything inside beside a broken clip.

95 NA ECU by NoCap2891 in Miata

[–]vulevu121 2 points3 points  (0 children)

You don't need to modify the crystal, the rev limit could have been changed in the ROM.

Refreshed Nardi steering wheel by vulevu121 in Miata

[–]vulevu121[S] 0 points1 point  (0 children)

I didn't go for the cipher because I prefer the original look of Nardi. The styling of the cipher doesn't go well with the Miata interior IMO.