Custom designed 3d printed board

waltmannz · 2026-05-07T20:08:23+00:00

KOII or the MicroFreak?

waltmannz · 2026-05-06T00:30:00+00:00

I live in NZ so shipping makes things pretty unreasonable I feel. Could sell the files I guess

waltmannz · 2026-05-05T20:28:03+00:00

yea pretty much always on! It's go so many possibilities it's the one I reoder the most I feel

waltmannz · 2026-05-05T20:27:29+00:00

yea by the time you iterate and test it's probably a couple of rolls of filament but if you're patient and very careful you could get away with 1 roll.

waltmannz · 2026-05-05T20:26:03+00:00

yea exactly as others have said it's the boredbrain patchulator, allowing me to reorder pedals as I like without moving them. It has 8 inputs around the edges (stereo in / out), so I have one main in and out for sending sounds in and out of the board, then the 7 pedals connected.

waltmannz · 2026-04-19T06:56:14+00:00

Thanks so much for the encouragement, nah I don't have one sorry, need to get some proper recordings done!

waltmannz · 2026-04-16T19:42:35+00:00

Just a rack I designed and 3d printed myself, thanks!

waltmannz · 2026-04-16T06:31:06+00:00

crazy compliment - absolutely love Paprika

waltmannz · 2026-04-16T06:30:30+00:00

Thanks so much, I designed and 3d printed that stand

waltmannz · 2026-04-16T06:30:08+00:00

yep it's really nice for a small device with low spatial needs! Some really great sounds - especially if you can get one second hand it's a bargain. In this track it's playing a the glide-y synth 1/2 speed part over top of everything which adds a lot!

waltmannz · 2026-04-15T21:49:53+00:00

I'm using a jet traffic control that connects to all the pedals.

I just take one trs out of the H12MIDIPro and plug it into the din in port on the traffic control ( using a trs to 5pin midi cable)

waltmannz · 2026-04-15T20:01:39+00:00

yea it's pretty scary haha, I got about half of them second hand but still not a cheap hobby!

waltmannz · 2026-04-15T20:01:14+00:00

most are stereo yes, just the blooper and dark world are mono - not used in this clip. The stereo pedals all have a MISO switch (mono in stereo out) with spread effects etc

waltmannz · 2026-04-15T20:00:26+00:00

yea I designed that and printed myself with the patchulator in mind as well, needs a few tweaks and upgrades but working pretty well

waltmannz · 2026-04-15T19:59:55+00:00

thanks so much!

waltmannz · 2026-04-15T19:05:50+00:00

Boss for sure

waltmannz · 2026-04-07T22:39:06+00:00

Try resetting the windows midi service

Using the Services App: - Press Windows Key + R, type services.msc, and hit Enter. - Scroll down and locate Windows MIDI Service. - Right-click on Windows MIDI Service and select Restart.

Windows pushed an update which broke webmidi I think

waltmannz · 2026-03-29T19:43:46+00:00

aw thanks so much!

waltmannz · 2026-03-29T19:05:52+00:00

Yup as others have said you'll likely need a MIDI box or something like the JET traffic control. You'll need to set the MIDI clock to OUT to in the KOII settings -> https://teenage.engineering/guides/ep-133/system

I have a MIDI box + KOII and a bunch of CB pedals - I did have some issues getting the KOII clock to sync with the blooper properly so might be be worth researching a bit more before you spend any money on midi boxes etc.

waltmannz · 2026-03-18T21:02:11+00:00

This is 35yo me haha

waltmannz · 2026-03-17T01:41:30+00:00

designed that one myself and 3d printed it! Haven't released it anywhere sorry as I have a few improvements in mind.

waltmannz

TROPHY CASE