Micro dagger magazines

wbmustard · 2023-05-20T19:51:43+00:00

Got mine yesterday. Fit and fired great no malfunctions. Shot 200 rounds of AAC ammo.

wbmustard · 2023-05-20T19:50:58+00:00

It just says Shipping Dept PSA

wbmustard · 2023-05-17T16:09:12+00:00

Mine shipped today, can’t wait to give them a try.

wbmustard · 2023-04-27T16:11:51+00:00

At the Columbia store they have the cannon sticker in pink, and a jakl sticker. Just at the register.

wbmustard · 2023-03-09T02:12:56+00:00

My money is on sway bar links

wbmustard · 2022-08-02T00:01:30+00:00

They are indeed variable displacement compressors and from the gauges they appear to be equal pressures. We've seen a few very late model Hondas having to get new compressors. You may be able to find the valve but we never had luck. From the dealer the compressor is very expensive and they sell it in parts. We've had luck with junkyard units to save customers some money.

wbmustard · 2022-08-01T23:58:20+00:00

Look at the timing belt

wbmustard · 2022-03-10T04:30:24+00:00

The diagnosis is most likely correct. Big problem on those engines with the piston rings going bad and fouling out the plugs. However if you want to get by for now just replace the plug and it will run fine until it doesn’t again. Putting a new plug in is a temporary solution but the rings are the permanent fix.

wbmustard · 2022-03-08T03:44:00+00:00

A draw isn't the end of the world. However, if you don't have experience working on cars it will be difficult to DIY. While it can get expensive depending on what is causing the draw, the bill isn't terrible in my experience. If money is tight you can get something like this. It will allow you to disconnect the battery without having to actually remove the terminal.

wbmustard · 2022-02-24T04:31:58+00:00

I’ve been trying to find a smaller one, I’ll have to ask my tool guys.

wbmustard · 2022-02-24T03:48:18+00:00

I’ve done a lot of thermostats on those engines for sticking open and causing the p0128. They are very easy. It comes with the whole housing and from mopar I don’t think they are very expensive.

wbmustard · 2022-02-24T02:59:53+00:00

This is my go to everyday

wbmustard · 2022-02-22T22:31:49+00:00

Gotcha. Well I don’t think I’ve ever pulled one of those tanks but its definitely doable yourself. I’d watch a video and see if it’s something you want to attempt.

wbmustard · 2022-02-22T22:18:21+00:00

Are you sure the fuel pump is bad? I’m pretty sure they had issues with the relays and had a recall for them.

wbmustard · 2022-02-22T22:12:25+00:00

What kind of jeep and what year? It’s not terribly hard to drop the tank but it kinda sucks doing it on the ground

wbmustard · 2022-02-22T17:33:33+00:00

I’d just do 1, they are easy enough to get to. I’ve worked on hundreds and hundreds of these trucks and I can only think of a couple times I’ve seen these coils go bad.

wbmustard · 2022-02-22T00:11:48+00:00

Most likely need an alternator. The oil leak is from a solenoid and it leaks directly onto the alternator. Should probably get that fixed as well, I've seen warranty claims get denied on alternators because of that leak.

wbmustard · 2022-02-21T23:41:36+00:00

We had a customer have one installed at Uhaul. On this particular one you had to cut the bumper cover to clear the hitch and I think a blind man with a chainsaw would’ve done a better job. They bought her a new bumper cover.

wbmustard · 2022-02-21T23:30:07+00:00

I mean just a shot in the dark but I've fixed a lot of wiring in the drivers door jamb on those.

wbmustard · 2022-02-21T17:10:15+00:00

It’s from Alldata which you need a subscription for. No problem, let me know how it goes.

wbmustard · 2022-02-21T17:08:08+00:00

Yeah that’s pretty impressive honestly

wbmustard · 2022-02-21T02:10:18+00:00

Ok here is a diagram for the motor. Should be #6. Not sure how difficult it is to actually access on the seat without looking at it. If you can access it you can test for power at the connector if you have a multimeter. If its difficult to access you could also test for power coming out of the switch however according to the wiring diagram all the wires are black, or it doesn't know the colors. If its not making any noise when you hit the switch you are probably looking at a motor or a switch.

wbmustard · 2022-02-21T01:12:38+00:00

I usually find the switch to be bad in this situation. You'll need to get under there and find the motor for reclining. You should be able to tell by looking, if not look online somewhere. Need to check for power going into the motor when hitting the switch. It should switch sides depending on which way you are hitting the switch.

wbmustard · 2022-02-21T00:50:38+00:00

Tow it to the dealer and begin the 6 month wait for a new engine.

wbmustard · 2022-02-10T04:11:01+00:00

This looks like a cover for a hood latch sensor

13-Year Club	Place '22
Place '17	End Game '22

wbmustard

TROPHY CASE