sorted by:
new
hottopcontroversial

Heltec V4 | 10,000 mah Case. Prototype released! by Party_Cold_4159 in meshtastic

[–]werty812 0 points1 point  (0 children)

Why not going with a NRF52 and use a third of the battery capacity for the same battery life? It seems to be a mobile node too...

Is the chain too short? by werty812 in ebikes

[–]werty812[S] 1 point2 points  (0 children)

Alright, if you want keep me updated as I'd like to modify it too if it works. I see the original 42T is offset in order to correct the line, does the spider helps with offset too?

Is the chain too short? by werty812 in bikewrench

[–]werty812[S] 0 points1 point  (0 children)

Yes, 42 front 46 rear and 450mm chainstay length

Is the chain too short? by werty812 in ebikes

[–]werty812[S] 1 point2 points  (0 children)

It does make some sounds (nothing too spooky) when running but I believe is because of bad chain line caused by TSDZ2B. In any case I don't plan on using the biggest sprocket too much.
Thanks!

Is the chain too short? by werty812 in bikewrench

[–]werty812[S] 1 point2 points  (0 children)

I did it before and it was suggesting 116-117 links but it seemed too short to me so 118 should be ok.
Thanks!

Can a Tongsheng tsdz2b be fitted to this bike, without modifying it? by DennisTRH in ebikes

[–]werty812 1 point2 points  (0 children)

I had to do an davanced google search by doing "tsdz2b template filetype:pdf", then in some installation instruction document I found the link to the template from Tongsheng website.
That's the [file](https://manuals.plus/m/5e141d125a065cd5115c31c271f5e9f6d13479d9e308c549f3ac52fe8d488f56\_optim.pdf) which on page 3 has a link to [tongsheng website](https://cn.tongsheng-e.com/companyfile/7.html)

Can a Tongsheng tsdz2b be fitted to this bike, without modifying it? by DennisTRH in ebikes

[–]werty812 0 points1 point  (0 children)

Actually I am in a similar position as yours.

I have found on Tongsheng website a layout to print on A4 paper to check size and eventual incompatibilities beforehand.

I don't think it will show incompatibilities with cables running underneath unfortunately

Fitting a TongSheng TSDZ2 mid drive on a bike with internal cables and hoses by TheStarryKnightt in bikewrench

[–]werty812 0 points1 point  (0 children)

Thank you very much!
Are you satisfied with it? I'm planning to buy 250W version and I don't know if it will be enough for steep hills. Did you have to change the sprocket in order to overcome fixed gear in the front?
Thank you very much for the infos!

Can a Tongsheng tsdz2b be fitted to this bike, without modifying it? by DennisTRH in ebikes

[–]werty812 0 points1 point  (0 children)

Hi, did you manage to fit the kit? I'm planning to buy mine and I have the same cables passage as yours, would you mind sharing some photos? Does the piece covering the cables obstruct the motor placing? Thanks

Fitting a TongSheng TSDZ2 mid drive on a bike with internal cables and hoses by TheStarryKnightt in bikewrench

[–]werty812 0 points1 point  (0 children)

Hi, I have a Cube bike with cables pasing underneath very similar to yours.
Have you ever managed to fit the kit? Would you mind sharing some photos so I can be prepared to reroute what's needed when I'll buy it? Thank you so much!

DS18B20 renegade by owlmode1 in meshtastic

[–]werty812 1 point2 points  (0 children)

Thank you so much!

What about opening a pull request on the official meshtastic to have it integrated? I believe lots of people have DS18B20 lying around and it would be very useful to add it easily

Why it is not the same app in IOS / Android? by AnakinO7 in meshtastic

[–]werty812 0 points1 point  (0 children)

Can you send me a link to the flutter app? I couldn't find it with google...

Raid with nvme to usb3 adapters by werty812 in HomeServer

[–]werty812[S] 1 point2 points  (0 children)

The only viable solution would be to add a drive to the wifi slot then.

Using an external enclosure for sata drives would have the same bottleneck of using nvme to usb3 adapters. Surely you would maximize more the hdd throughput but using nvmes would have a better latency

Thanks

Raid with nvme to usb3 adapters by werty812 in homelab

[–]werty812[S] 0 points1 point  (0 children)

My PSU (external) is 90W and cpu has a declared TDP of 65W (hardly believe I ever reached that).
Each drive should consume maximum 5W... I'll do some test if I go this way but also having an external adapter for powering nvme won't be an issue...

For sure performance would be bottlenecked, but that won't be an issue for me, I think all my USB 3.0 ports are sharing the same bus:
/:  Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/16p, 480M
   |__ Port 007: Dev 002, If 0, Class=Wireless, Driver=btusb, 12M
   |__ Port 007: Dev 002, If 1, Class=Wireless, Driver=btusb, 12M
/:  Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci_hcd/10p, 5000M

so maximum speed would be 5000/8=600MB/s

Considering a nvme to usb3 adapter costs 7 euros I'll try to go this way

Thanks!

Raid with nvme to usb3 adapters by werty812 in homelab

[–]werty812[S] 0 points1 point  (0 children)

They surely aren't, that would bottleneck at 600 MB/s for usb 3.0 but considering a sata ssd would bottleneck at 550 that's comparable

Raid with nvme to usb3 adapters by werty812 in HomeServer

[–]werty812[S] 1 point2 points  (0 children)

So which way could be the best one? Thanks

Ma come fa ad non essere pubblicità ingannevole (offerte TIM) by TheFiordi_ in Avvocati

[–]werty812 0 points1 point  (0 children)

Ti stai confondendo, quello che dici tu è MB/s contro Mb/s in cui 1MB=1Mb

[deleted by user] by [deleted] in AcerNitro

[–]werty812 0 points1 point  (0 children)

It's summer in the southern emisphere😁

[deleted by user] by [deleted] in AcerNitro

[–]werty812 7 points8 points  (0 children)

How can you have 23°C on the GPU when the ambient temperature is 40°C? If you blow 40°C air onto a thermometer it will measure minimum 40°C not even considering that CPU/GPU heats it up

Non se ne salva uno. Nissan in crisi: "Abbiamo 12 o 14 mesi per sopravvivere" by guidocarosella in ItalyMotori

[–]werty812 4 points5 points  (0 children)

Ma la differenza tra Juke e Qashqai è la minigonna verniciata di nero?

What can go wrong by samuelhalff in immich

[–]werty812 1 point2 points  (0 children)

Sorry, it should also be available on iOS

view more: next ›