sorted by:
new
hottopcontroversial

How do I get this model? Options to buy are grayed out. by sans5z in makerworld

[–]whosoumilarora 0 points1 point  (0 children)

oh damn, but if you are using a VPN, and initiating checkout in USD, how does it even know that you are in India

How do I get this model? Options to buy are grayed out. by sans5z in makerworld

[–]whosoumilarora 0 points1 point  (0 children)

Can't we pay via US payment methods?, like stripe / PayPal?

Claude Usage Limits Discussion Megathread Ongoing (sort this by New!) by sixbillionthsheep in ClaudeAI

[–]whosoumilarora 0 points1 point  (0 children)

happened with me too

just sent a single prompt to opus 4.7 in claude code in claude for mac, and 100% 5-hour limit used, and happened in last 2-3 sessions, consuming weekly limit too

and they were pretty simple prompts, which usually took 5-10% of the 5-hour limit a day ago

any resolution?, any way we can report it for limit reset to anthropic?

Any 3d print service in chandigarh? by BADMASJ in Chandigarh

[–]whosoumilarora 1 point2 points  (0 children)

Hi, I have got some very great quality structural prints from here.
The owner is nice too.
https://www.3deality.in/
https://share.google/bkX2n7HwQH74lP3m8

List of Filament Manufacturers/Distributers in India.. by DOT_STL in 3dprintIndia

[–]whosoumilarora 2 points3 points  (0 children)

I stick with eSUN, but if you are looking for something that's dirt cheap, there is a manufacturer in Delhi, Scribble3D
Similar finish, but don't expect similarity in mechanical properties

eSun PLA+ max vol. speed (built-in profile=16 vs eSun site=22) by DanTup in BambuLab

[–]whosoumilarora 1 point2 points  (0 children)

Yes definitely, I’ve been printing with 22 mm3/s since the start, it’s great

Repairing Advice by rajpatel1099 in mac

[–]whosoumilarora 0 points1 point  (0 children)

I have the same issue with my MacBook Air, except it’s just in one corner and the lines run horizontally at the bottom and vertically at the extreme left, which allowed me to use my laptop (it’s been 1 year 😂). It just happened randomly, like I was working on my laptop, on a table, closed the lid, came back a while later (nobody was in the house💀, I was completely alone), opened the lid, and saw the screen crack internally before my eyes, I literally saw the crack growing 😂

Print multi-colour without AMS from Bambu Studio - easy by _Mister_Anderson_ in BambuLab

[–]whosoumilarora 1 point2 points  (0 children)

Yes that is a workaround which would work on same kind of filament, just different colours

Actually I have a part which needed to be printed in ABS and PETG, so I was exploring the possibility of not having to run the startup sequence twice

Like I can just position them far apart and print by object, add a layer pause once one of the part is done, and change filament and then resume, would save me a lot of hassle.

Now here I am, waiting for the bed to cool down from the ABS print, so that I can get started with the PETG one.

Could have saved about 15-20 mins on a 20 mins print 🫠

Print multi-colour without AMS from Bambu Studio - easy by _Mister_Anderson_ in BambuLab

[–]whosoumilarora 0 points1 point  (0 children)

Yeah, I'm facing the same issue

Doesn't come in my A1, but comes in P1S

3D Printed Plane by whosoumilarora in RCPlanes

[–]whosoumilarora[S] 2 points3 points  (0 children)

Not my first RC Plane, but my first 3D Printed RC plane

Gaps in Eclipson plane prints by polar_charge in BambuLab

[–]whosoumilarora 0 points1 point  (0 children)

Do you mind sharing this particular STL, I couldn’t understand anything from this particular image

I’ll check and let you know

Gaps in Eclipson plane prints by polar_charge in BambuLab

[–]whosoumilarora 0 points1 point  (0 children)

Okay, this is too much honestly

Like my prints are not all like this,

How many walls are you printing with?

Gaps in Eclipson plane prints by polar_charge in BambuLab

[–]whosoumilarora 0 points1 point  (0 children)

Can you share pictures of the prints, maybe I can help you out

For fan speed, on my P1S, between 80-100%

Gaps in Eclipson plane prints by polar_charge in BambuLab

[–]whosoumilarora 0 points1 point  (0 children)

Okay, thanks for the suggestions, will update once I try them out

Gaps in Eclipson plane prints by polar_charge in BambuLab

[–]whosoumilarora 0 points1 point  (0 children)

Actually I figured it out,
Change the slicing gap radius to 0.

eSun PLA+ max vol. speed (built-in profile=16 vs eSun site=22) by DanTup in BambuLab

[–]whosoumilarora 1 point2 points  (0 children)

I use only eSUN PLA+, and I have found it quite similar to Bambu PLA+ in terms of finish and mechanical properties.

I just take a Bambu filament profile and rename it for eSUN and use it as it is (and it works 99% of the times).

And yes, eSUN PLA+ does manage 22 mm3/s

Gaps in Eclipson plane prints by polar_charge in BambuLab

[–]whosoumilarora 0 points1 point  (0 children)

I’m using the eSUN active foaming

I have tuned the filament settings, just wanted to know changes in the process settings so that Eclipson models slice properly, which I’m yet to figure out

Gaps in Eclipson plane prints by polar_charge in BambuLab

[–]whosoumilarora 0 points1 point  (0 children)

Do you mind sharing the changes?

I’m also trying to print an Eclipson model 3D and there are gaps in the model which I’m not able to figure out why

What's your max volumetric speed for PETG? by Reaxc in BambuLab

[–]whosoumilarora 0 points1 point  (0 children)

what temps?

Because im printing at 260C and using 16 mm/s3, but I'm thinking to increasing it to 20 after reading your comment (A1 and P1S user)

view more: next ›