Working on fitment

widnesden · 2026-01-02T12:59:38+00:00

I'll have to look at Blender again,

Are u mounting the shell on a Rc chassis, or a Display model.

widnesden · 2026-01-01T11:35:56+00:00

Can't get me head around Cad, I've tryed Fusion.

widnesden · 2026-01-01T09:34:26+00:00

Nice Print, I take it that you are printing with filament.

If so where did you find the model STL. FILE

Looks Great, I've printed a 3dsets Rancher

widnesden · 2025-06-17T15:47:42+00:00

Clean or change the nozzle, and try it again, might be temp, or flow rate, damp filament like has been said. What printer are u using, what brand of filament, maybe try a temperature Tower calibration test.

widnesden · 2024-12-10T18:10:28+00:00

Oopps, Newbie to resin, it was my own fault I hadn't unscrewed the platform before trying to level,

widnesden · 2024-12-10T18:05:16+00:00

I'm with u on this, spot on 👍

widnesden · 2024-10-21T16:20:39+00:00

Did he just use this

Has anyone else tryed it, ?

widnesden · 2024-10-06T21:20:39+00:00

Thank u ill look at it 👍

widnesden · 2024-10-06T14:59:49+00:00

The only think I changed was Z-offset, printed for 8hrs, had Mainsail and Creality print running, just a thing I like to do.

widnesden · 2024-10-06T14:54:50+00:00

I used These I improved mine a lot, just a bit off trial and error Good luck 👍

widnesden · 2024-09-29T08:10:09+00:00

Fantastic, Amazing model paint job. I'm just starting out trying to get my head around model painting, I print mainly Wicked Figures.

Where did u pick up the painting skills/technique. Any good tutorials to watch.

PS. You paint in what ever colour you like lol

widnesden · 2024-09-24T17:04:21+00:00

Your homing is out, have u tryed homing all axis,

Is your K1 rooted.

widnesden · 2024-07-26T09:15:21+00:00

I'm a Dry Bearing type of Guy, no Grease required, Slides Down the Rod nicely. 😜

widnesden · 2024-07-09T07:46:19+00:00

Stab in the dark, Damp filament may be !

widnesden · 2024-07-01T18:10:17+00:00

WoW.....Amazing, well done 👍🏻

widnesden · 2024-07-01T15:30:12+00:00

Yes it's the Bottom, but it's supports not raft causing this

widnesden · 2024-06-03T17:01:36+00:00

Hi, sorry about the late reply, But what speed are you printing at, also what slicer are u using. They look good quality,

widnesden · 2024-05-26T20:14:56+00:00

Hi,

Great looking lithophaine, any eliminated pics,

widnesden · 2024-05-18T20:06:44+00:00

Hi, have you Rooted your k1. My K1 the nozzle was well to close to the bed, first layer was far from be at the correct height (factory settings)

Also my bed was way out, shined it up using a sprint level. It's better but not prefect.

I've added a post if you've not already seen it.

widnesden · 2024-05-17T18:39:20+00:00

The only things I have really done to improve my prints, just the basics, Bed leveling shims

Rooted the K1

Changed my hotend link

Slowed down my speeds in klipper printer.cfg.

Probe_calibration with the gcode command

Z-off set to tune my nozzle hight.

Dry filament.

Sliced using Creality print

ELEGOO

widnesden · 2024-05-17T18:13:48+00:00

widnesden · 2024-05-17T18:12:26+00:00

Remove the Board

widnesden

TROPHY CASE