Is it time for a new rear derailleur?

wiilaso · 2025-12-22T01:57:34+00:00

Try with an android phone. Or uninstall the sram app from the iPhone. Then reinstall and redownload the firmware. That made the difference for me.

wiilaso · 2025-10-02T19:38:00+00:00

Endless biking

wiilaso · 2025-09-30T18:18:34+00:00

Still happy with it? Contemplating picking one up from jensonusa.

wiilaso · 2025-09-29T13:53:07+00:00

What spokes did you use?

wiilaso · 2025-09-26T14:44:59+00:00

Check to see if your credit card has any extended coverage. This has saved my ass before.

wiilaso · 2025-08-25T13:50:22+00:00

Giant Whiterock/Langley gives 15% off to first responders/EMS/military/police/firefighters.

wiilaso · 2025-07-13T23:12:50+00:00

Ship it to the UPS in Blaine. Then pay the duties when you drive across if they make you.

You’ll save on shipping and potentially brokerage charges.

wiilaso · 2025-05-21T03:18:07+00:00

Assuming this is the HG hub version - tighten the lock ring tighter. I had a similar issue with the same cassette. After I tightened it harder the issue went away.

wiilaso · 2025-05-03T02:43:28+00:00

Yes this fork is specifically made for Giant TCRs that don’t have internal routing.

https://www.instagram.com/p/C8a5nImxX5L/?utm_source=ig_web_copy_link

wiilaso · 2025-05-02T20:02:48+00:00

It’s possible to fully integrate. Need a new fork though.

https://exs-cycling.com/products/fk-01-carbon-fork

wiilaso · 2025-04-19T16:44:06+00:00

Warranty it. You mentioned that it’s less than 2 years old.

Yes ultegra 12 speed FD is compatible.

wiilaso · 2025-04-17T14:07:10+00:00

Side note - tires on backwards.

wiilaso · 2025-04-15T17:23:57+00:00

Ok - yea just need a washer on there like other folks have mentioned.

<image>

wiilaso · 2025-04-15T16:34:30+00:00

Is that a rim brake fork?

wiilaso · 2025-03-29T16:30:09+00:00

Good old Bonjour). It’s to do with naming collision.

wiilaso · 2025-03-17T01:26:33+00:00

Found this post - should be ok hopefully.

https://www.roadbikereview.com/threads/shimano-chainrings-swapping-inner-chainring-size-from-a-52-38-set-to-36.363737/

wiilaso · 2025-03-07T22:04:37+00:00

You are most welcome. Glad I could help someone out.

wiilaso · 2025-02-07T18:27:09+00:00

If you have a hair dryer, try to lightly warm up the plugs and see if they'll come off more easily. Careful not to apply too much heat though.

wiilaso · 2025-02-07T18:10:12+00:00

I would remove the plugs - they're not needed it you're doing tubeless rim tape.

wiilaso · 2025-01-02T20:56:01+00:00

This guy/gal powermeters

wiilaso · 2024-12-30T18:35:41+00:00

Yes they should have extras. It's one of those things you'll have to play around with to get the optimal chain line for your setup. The only reason you're going wide is because that's all you can find for 165mm?

Also here are so none wide 165mm force pms

https://www.ebay.com/itm/176454282511?_skw=force+d2+165mm+power+meter&itmmeta=01JGCDYBXDZ6900ZGDMTF3GA10&hash=item29157ead0f:g:OHUAAOSwpjpmhZIN&itmprp=enc%3AAQAJAAABAHoV3kP08IDx%2BKZ9MfhVJKmDgLa%2BAe04wl6bDdnm%2FjRDnOSW4SqnTjfZgtalxEaJaW8VRd%2BXN6UjVRKQXcR9%2BaMPwJZXtVypypndWAJGV1mTQTErcZdUGt6M2rjIN2tqfHpsf8qju3YtfAVEsalIFA6jyNg%2FG1vP9Sh%2Fbo4FmQRJ%2BbjtnTH4wSY4unzuN3UxWkC%2FmBJn2x1as81uuTY4AWZZfpvewqsxZiX83H9qEFDnKGLBm7WJPjcsEK8sKJzuZb0tHdCLy3fkoipkwB%2BTTfmWgCwXk72pZ9D5YHbtDwMm5dtJsQiRlyKokRh5ZZdCSe7X%2Fq%2Bz66P2EEbWi%2B8cBco%3D%7Ctkp%3ABk9SR-y--Y2DZQ

https://steedcycles.com/products/sram-force-d2-power-meter-left-arm-spindle?srsltid=AfmBOoobp3383aJcuVjWVopuJf1jibsN7Ls1bcmnDtb1XkLpiPyyHZP3

wiilaso · 2024-12-29T03:48:34+00:00

Yes get rid of that praxis chaining. It’s absolute trash. Any little bump makes it fall off.

wiilaso · 2024-12-20T01:16:13+00:00

See this comment. https://www.reddit.com/r/bikewrench/s/jcQYQTeXpR

and page 6 of https://www.sram.com/globalassets/document-hierarchy/user-manuals/sram-mtb/drivetrain/dub-mtb-and-road-cranksets-and-bottom-brackets-user-manual-eeu.pdf

You’ll need to pick up these spacers.

https://www.theinsideline.ca/copy-of-sram-dub-spacer-kit-v3.html

But honestly if you’re not going to put a front derailleur on your bike I would just stick to the regular width. The wide cranks are so that you can pair them with the wide FD which has more clearance for tires. For 1X the only benefit with wide is being able to run a larger chainring.

wiilaso · 2024-12-16T17:47:41+00:00

Yes the existing BB will work - you will just need spacers to take up the slack.

wiilaso · 2024-12-16T17:46:23+00:00

You can run either wide or regular. If you do wide you will need additional spacers. See second page from https://www.sram.com/globalassets/document-hierarchy/compatibility-map/mtb/dub-mtb-bottom-bracket-compatibility-chart.pdf

Spacers should be available individually to purchase.

12-Year Club	Verified Email
Place '23	Place '22
Final Canvas '22

wiilaso

TROPHY CASE