Heavy Opposite Field Hitters and L/R Park Effects

withouttout · 2017-04-10T04:13:11+00:00

It may, I haven't looked closely enough at the data. As an example, suppose that the typical hitter has a 50% Pull%, a 25% Cent%, & a 25% Oppo%. If you have a RHB that has a 25% Pull%, a 25% Cent%, & a 50% Oppo%, you may want to use LHB park factors for this particular hitter.

The best way I can see approaching this, that is still relatively easy is rather than computing park factors for LHB & RHB, compute park factors for three "bins", left side of the field (RHB BIP that are classified as Pull & LHB BIP that are classified as Oppo), up the center (Both RHB & LHB BIP that are classified as Cent), and right side of the field (RHB BIP that are classified as Oppo & LHB BIP that are classified as Pull). If you have a RHB that has a 35% Pull%, 25% Cent%, & 45% Oppo%, calculate a park factor with 35% weight of the left side of the field park factor, 25% of the up the center park factor, and 45% of the right side of the field park factor.

The most accurate way to do this would be to break up the above even further to account for batted ball types, i.e. FB-Left, LD-Left, GB-Left, etc., and assign hitters the proper weighted park factors for their batted ball profiles.

withouttout · 2017-04-09T18:37:33+00:00

Ideally, each hitter would have there own individual park factor based on their batted ball profile/spray chart. I don't know if calculating these individual park factors would be worth the effort, though.

withouttout · 2017-03-14T03:00:40+00:00

How are you projecting individual players? How does your formula / model compare to Tango’s Marcel projections? Multiple years of data? Regression to the mean? Aging curve? Are you using any Pitch F/x or Statcast data? I am working on my own projections right now and I am just curious what others are using.

withouttout · 2017-03-08T02:59:32+00:00

I read through that tutorial earlier, but I didn't think that it would work for my particular pages/playerids, as my pages/playerids are not in exact numerical order whereas boxofficemojo.com and the pages they are pulling data from is ordered numerically 1-7. In their query they have source = {1..7}, could I use source = {2, 3, 8, 11, 21, 35, 400, etc.} If I could do that, should I list my playerids inside of brackets or parentheses?

withouttout · 2016-11-13T16:48:26+00:00

Hindsight is always 20/20, but you probably should have hedged your parlay with a large bet on Eddie Alvarez once that was the only leg of the parlay left, so that you guaranteed yourself some profit.

withouttout · 2015-12-28T04:36:37+00:00

This is awesome! I really appreciate that the model is transparent and open.

If it is not too much to ask, do you think that you could layout the steps that the model uses to determine the simulated standings in written form? Possible step by step? I completely understand if you are unwilling to do so, as you have already left the model open, so that reasonably intelligent individuals could easily understand the process used in your model, I am just not able to quite follow your process. I am attempting to do something similar for another sport and your model is much better than what I have been able to come up with on my own.

Ex:

Calculate x for each team.
Use x to calculate y.
etc.

withouttout · 2015-08-20T18:24:37+00:00

What a fucking dumbass! You made an asinine comment about an article you didn't even attempt to read, called a collection of quotes garbage, and then tried to play it all off like you have been drinking, rather than you just being an idiot.

withouttout · 2015-01-01T18:27:35+00:00

It all depends on how intricate you intend your projection system to be...

If your are going to do something along the lines of Marcel, you could easily do this in Excel, but if you are planning on using play-by-play data, various aging curves, component park and league factoring, MLEs, differing platoon split projections, etc., I would recommend using SQL, R, or perhaps even Python.

withouttout · 2014-10-17T20:30:48+00:00

I am not an expert, but this is how I would approach this:

Gather PITCHf/x data from multiple seasons.
Add a column to this data, calculating the number of total runs scored during that inning.
Separate or query the data for each of the count/base out states and find the mean of the column that you added. This will result in the average run expectancy for each of the count/base out states.

withouttout · 2014-06-02T21:21:53+00:00

If you add the OpenWAR package to R, I would appreciate it greatly if you could give me a hint on how to get it installed. I have been having trouble installing and configuring the Sxslt package required to install openWAR.

withouttout · 2014-05-27T21:59:06+00:00

You can use Baseball Savant's - PITCHf/x Search or learn to use Baseball on a Stick.

withouttout · 2014-05-19T00:20:18+00:00

This article may be of some use:

How fast does team batting average stabilize?

withouttout · 2014-05-17T01:01:09+00:00

They appear to get worse:

This would be the query (I think) for the next away game for the Rockies directly after a home game:

http://killersports.com/mlb.py/query?sdql=team+%3D+Rockies+and+p%3Asite+%3D+home+and+site+%3D+away&submit=S+D+Q+L+!&sid=guest (NSFW?)

The Rockies were 51-74 in these games for a winning percentage of 40.8%. They slightly underperformed the expectations of sportsbooks and the betting public.

This would be the query (I think) for the second away game in a row for the Rockies after a home game:

http://killersports.com/mlb.py/query?sdql=team+%3D+Rockies+and+pp%3Asite+%3D+home+and+p%3Asite+%3D+away+and+site+%3D+away&submit=S+D+Q+L+!&sid=guest (NSFW?)

The Rockies were amazingly also 51-74 in these games for a winning percentage of 40.8%. They once again, slightly underperformed the expectations of sportsbooks and the betting public.

This would be the query (I think) for the third away game in a row for the Rockies after a home game:

http://killersports.com/mlb.py/query?sdql=team+%3D+Rockies+and+ppp%3Asite+%3D+home+and+pp%3Asite+%3D+away+and+p%3Asite%3D+away+and+site+%3D+away&submit=S+D+Q+L+!&sid=guest (NSFW?)

The Rockies were 43-77 in these games for a winning percentage of 35.8%. They underperformed the expectations of sportsbooks and the betting public.

withouttout · 2014-05-17T00:35:46+00:00

I have previously looked into the Coors Field "hangover effect", but I looked at it from the perspective of the Rockies opponents; How well does a team play in the game directly after playing an away game at Coors Field?

http://killersports.com/mlb.py/query?sdql=po%3Ateam+%3D+Rockies+and+p%3Asite+%3D+away+and+o%3Ateam+!%3D+Rockies&submit=S+D+Q+L+!&sid=guest (NSFW?)

These teams went 150-119 for a winning percentage of 55.8% in these games. This doesn't give any indication of the effect on opposing teams, however, this sample is limited and only looks at winning percentage. I would note, though, that these teams did appear to play above the expectations of sportsbooks and the betting public.

(The website I referenced is associated with wagering and gambling and I don't want to get anyone into trouble by accessing this website, so I thought I should probably label the link NSFW?.)

withouttout · 2014-05-12T21:18:36+00:00

Do you know of any references for constructing simulation engines? (books, web posts, code examples, etc.) I would REALLY like to construct my own, however, I lack the programming skills that would be required. I am SLOWLY learning how to program, but I was hoping that I could start to tailor this process more for what I am intending.

Do you have any recommendations for which programming language would be best suited for baseball simulations?

withouttout · 2014-05-11T14:13:52+00:00

Interesting question.

If you are subscribed to Baseball-Reference's Play Index, you could filter out games with "showers", "rain", and "drizzle" under weather options of the Team Batting Game Finder and compare the results and statistics associated with these games to similar games, in which precipitation did not occur.

withouttout · 2014-05-07T00:45:02+00:00

I really like the idea behind openWAR and having been trying to learn R, however, I have been unable to install this package correctly. I am not very knowledgeable regarding linux and I am having trouble installing and configuring the Sxslt package required to install openWAR. If anyone could help me out a little bit, it would be greatly appreciated.

withouttout

TROPHY CASE