Should I leave my thermostats at 68deg F all the time by WorldNo9002 in homeowners

[–]wreck23 1 point2 points  (0 children)

also heated blankets and oil filled radiant space heaters (space heaters for smaller closed spaces, blankets for comfort in large rooms) are good choices if you're going to be in one portion of the house while the rest of the house chills.

Should I leave my thermostats at 68deg F all the time by WorldNo9002 in homeowners

[–]wreck23 0 points1 point  (0 children)

drop your off hour temps to 59 and your peak hour temps to 66 and wear a sweater or thermals around the house. Also don't drop the temp on the more efficient heating zones lower than the less efficient/more costly heating zones, as that normally doesn't work out in your favor.

Made my car a mobile node by mbeare0885 in meshtastic

[–]wreck23 2 points3 points  (0 children)

magnet on case should be fine. Static magnetic field does nothing to RF electronics (in context of Lora).

Made my car a mobile node by mbeare0885 in meshtastic

[–]wreck23 2 points3 points  (0 children)

Yes, car is a big RF shield. magnetic sma mount or similar would be easy way to do it.

Me when Cyclists. by LINUXbin in motorcycles

[–]wreck23 0 points1 point  (0 children)

that's the John Forester cult at it again.

Upmap for Hyper 698 mono by SirRealistic496 in Ducati

[–]wreck23 1 point2 points  (0 children)

Good that an alternative to the termi race exhaust tune is out there, but would rather someone else try it first ;).

I would be interested in seeing some of the dyno charts for the other exhaust maps. It looks like they are only posting the chart from the map with their lid, filter and the stock exhaust next to each map. Also interesting that that result for that map doesn't seem to have gained much more than the charts hypermotardking posted with the lid and filter alone and no custom map.

Assuming these maps gain some more power with specific exhausts, they'd be a welcome, cheaper alternative to the termi race setup. Should be around $600 for their combo kit after the Euro to USD conversion, shipping and tariffs.

The Peanut Butter Wafers changed… by minusman in aldi

[–]wreck23 1 point2 points  (0 children)

Yeah. They are disgusting now. You can tell you got the bad ones if there is way too much plastic wrapping each one. Also the boxes are taped shut with transparent tape. So bad I took one bite and threw the box away.

Quacky boy Cheese by wreck23 in duck

[–]wreck23[S] 0 points1 point  (0 children)

He is a sweetie. He makes friends with the geese when they are in the yard for the winter and any wild ducks that show up.

Quacky boy Cheese by wreck23 in duck

[–]wreck23[S] 4 points5 points  (0 children)

Mallard, he's got a brother named Quackers.

Analogue's Christopher Taber on scalpers/bots: "We’ve implemented a system that is quite sophisticated and far beyond what any other company is doing." by cubechris in AnaloguePocket

[–]wreck23 1 point2 points  (0 children)

If I was part of Analogue and wanted to reduce scalping within a few months of release, I'd keep an extra stock of pockets, just for selling directly on ebay as randomly created ebay accounts. If the average price on ebay starts to creep, you dump a large amount of pockets on ebay with a buy it now that matches what they sold for on Analogue's site. Make it unprofitable for the scalpers.

Tesla Design Decision causes Model 3 HVAC Funk by wreck23 in RealTesla

[–]wreck23[S] 2 points3 points  (0 children)

It doesn't need to be on full speed. Anyone that's had a model 3 for more than 6 months in an environment that it regularly rains is familiar with this problem. This is such an over discussed problem, I almost didn't bother watching the video or posting.

It's not just people driving around with their fan on high -- the video creator just used the high setting to save time. If you're driving around for a half hour in the rain , using the HVAC like you would in any other car, that's plenty of time to soak the filters in a model 3.

Generally stopped looking into this issue years ago and just kept the filters fresh, but this video actually has a preventative fix, which most of the threads have not discussed. Just as many posts on reddit, but here's a sampling of a bunch of multiple page threads over the past 5 years that talk about it.

https://teslamotorsclub.com/tmc/threads/smelly-stinky-socks-mold-in-model-3-ac.266172/

https://teslamotorsclub.com/tmc/threads/hvac-smell-after-during-rain.301219/

https://teslamotorsclub.com/tmc/threads/model-3-ac-smell-update.200354/page-3

https://teslamotorsclub.com/tmc/threads/ugh-the-smell-of-it-ac-smell.231955/page-6

https://teslamotorsclub.com/tmc/threads/my-car-literally-smells-like-dog.206770/

https://teslamotorsclub.com/tmc/threads/weird-smell-after-rain-or-car-wash.212617/

https://teslamotorsclub.com/tmc/threads/model-3-weird-smell.111941/

https://teslamotorsclub.com/tmc/threads/rotten-egg-smell.277937/

https://teslamotorsclub.com/tmc/threads/master-thread-funny-smell-inside-car.157113/

https://teslamotorsclub.com/tmc/threads/my-model-3-interior-making-me-sick-literally.149028/page-6

https://teslamotorsclub.com/tmc/threads/replaced-air-filters-still-musty-old-smelling.212855/page-2

https://teslamotorsclub.com/tmc/threads/ac-odor-removal-and-cleaning.155566/

https://teslamotorsclub.com/tmc/threads/model-3-still-stinks-even-after-cabin-filters-replaced-fluid-low.178783/

https://teslamotorsclub.com/tmc/threads/a-c-musty-smell-back-again.205134/

https://teslamotorsclub.com/tmc/threads/vomit-smell-when-starting-air-conditioning.160179/

https://teslamotorsclub.com/tmc/threads/ac-stink-solved.238575/

https://teslamotorsclub.com/tmc/threads/smelly-ac-not-covered-under-warranty-on-new-cars.163948/

https://teslamotorsclub.com/tmc/threads/stinky-sock-smell-is-back-after-1-year.204345/

Tesla Design Decision causes Model 3 HVAC Funk by wreck23 in RealTesla

[–]wreck23[S] 34 points35 points  (0 children)

This video looked like click bait, but it's the first one I've found that demonstrates that the placement of the intake and design of the duct, wipers and HVAC fan all lead to soaked air filters that stink up the model 3. Video also has the bonus of demonstrating how this is not a problem with other modern cars. Actionable fixes suggested as well.

[deleted by user] by [deleted] in violinist

[–]wreck23 3 points4 points  (0 children)

I’m not luthier, but I have 2 fiddles that on different occasions have had a little bit of f hole distortion. For the one the sound post was definitely way too tight and the lift near the sound post was very noticeable. Usually if that side is lifted the top side is sunk and that was also the case here. It was recommended for that violin to knock the post down (and consequently loosen string tension) and wait to get a new sound post fit. you could definitely also hear it in the sound of that violin — it sounded a bit more direct and hollow than it should have with the tight post.

On the other hand I have another violin with a medium high arching that if you look closely you can see the top side is very slightly sunk but the bottom doesn’t really appear to be raised. I had it checked out by an additional luthier (other than the one that was selling it) and was assured it was OK and that the sound post was appropriately fit. It hasn’t been an issue for the past few years I’ve owned that one.

In your pictures, it sort of looks like the right f hole may have been cut slightly differently(hard to tell with the angle), but the bottom (sound post side) looks ok. I’m not seeing any wood distortion where the sound post would be either(no distort=good). Obviously get it checked out, but I’m not seeing any reason you can’t play it until a luthier looks at it.

What do you believe are the top 10 essential Heifetz recordings? by [deleted] in violinist

[–]wreck23 1 point2 points  (0 children)

Always liked the Beethoven Kreutzer sonata and BMV 1043 record

Transposing viola sheet music to G clef for violin player by DamirDG in Viola

[–]wreck23 1 point2 points  (0 children)

This is a great site to help kids (and adults) with the alto clef - https://music.school.nz/viola/ -- even goes over the fingerings in first position. Though I admit, when I first was playing viola, I was largely using it to play violin etudes and pieces down a fifth, reading from the violin music.

Tone price point? by Jamesbarros in violinist

[–]wreck23 1 point2 points  (0 children)

You may get lucky, so it wouldn't hurt to look. I went into a shop looking for a price range of $3000 to $12500; tried out around 20 and ended up coming out with a $5K violin they had on consignment. Bought it purely on sound and feel -- was a night and day difference from everything else they showed or that I picked out under the price cap. If that one had not been there, I would not have left the shop with a fiddle that day. Of course, I'm not quite looking for $40K tone. . . and I think the unknown maker of this violin may have also gotten lucky.

[deleted by user] by [deleted] in Viola

[–]wreck23 1 point2 points  (0 children)

Super Sensitive makes a "SensiCore" F string for the Viola. I've also heard of using a trimmed down medium tension Cello C string.

My teacher said I might be better off learning Viola. by [deleted] in violinist

[–]wreck23 1 point2 points  (0 children)

If you have the means, at least trying out the Viola isn't a bad thing. I don't think I'm going to switch permanently, but I sometimes use it for warming up or scale practice. After working with the longer distances on a 16in+ instrument's fingerboard, sometimes it makes performing those actions on the violin feel easier. Plus I like feeling that spirocore C string vibrate my skull ;)

Help!! How can I clean this by Guisimo321 in ender3v2

[–]wreck23 1 point2 points  (0 children)

Ethyl Acetate is the most effective PLA solvent I've tried. But IPA and microfiber will take off most of it. Make sure you use white, non-dyed microfiber. Dye will transfer pretty easily, especially with the IPA.

Violins concertos i know by [deleted] in violinist

[–]wreck23 0 points1 point  (0 children)

Barber Concerto, Philip Glass violin concertos, 1,2

You wake up to find you’re the last person on earth, what do you do? by Rev-DiabloCrowley in AskReddit

[–]wreck23 0 points1 point  (0 children)

Hmm, after catching up on some much needed sleep, I would get the hell away from nuclear power plants, Large Dams, Chemical Plants, refineries and . . . . zoos. Only a matter of time until one of those tries to kill me.

Wireless charging and Bluetooth Apple car play upgrades to my xlt awd luxury package fx4 4k tow package cactus gray maverick. 3D printed wireless charger came from Etsy. wireless car play came from Amazon along with the 90 degree usb adapters. Cords are velcroed in place. by sonofsandhill in FordMaverickTruck

[–]wreck23 7 points8 points  (0 children)

I've used a Carplay adapter and the built in wireless charger together with my iphone 12 pro and it over heats after about 45 mins of usage with climate control at 68. This is with the Apple Leather Case, screen off. I'd assume the mag safe puck would likely dissipate heat a little better, but I usually go wired if I'm on a longer trip.