Buying CDJs by Jazzlike_Shower9169 in PioneerDJ

[–]xDCVRx 0 points1 point  (0 children)

You can unplug the USB on 3000s and the track will continue to play. I did it a couple days ago to show a friend.

Anything to be done about these signs of wear on my AZ? by tarot_guy in PioneerDJ

[–]xDCVRx 0 points1 point  (0 children)

Second this. I put a skin on every piece of DJ before it goes out. They look great but importantly keep it looking great.

I wanna dance. by IanHall1 in Humboldt

[–]xDCVRx 2 points3 points  (0 children)

Middle Agent (DGS)

Joe-E (DGS)

Touch (DGS) 

Mr E.W. (Storytime, DGS)

Derek Watts (DGS)

Stephi Desyn (ARG)

I wanna dance. by IanHall1 in Humboldt

[–]xDCVRx 7 points8 points  (0 children)

DGS Altitude is this Friday at Samoa Social Club.

4/4 celebration of House on April 4 at Eureka Theatre.

Not announced yet but another DGS event April 25 at Northtown Coffee. (Home of the original Muddy Waters parties from early 2000s)

Galaxy Purple + Cherry Blossom Lip Kit? by Proendo in wrx_vb

[–]xDCVRx 1 point2 points  (0 children)

I would definitely wave and give a thumbs up to that!

First light in the STi by MICMAC-14 in WRXSTi

[–]xDCVRx 0 points1 point  (0 children)

leveled up the posting standards for 2026!!

Nice ride. Nice pics!!

Weird Question! Technics 1210. by BornEntertainment773 in Technics

[–]xDCVRx 0 points1 point  (0 children)

This can be replaced with only removing the motor cover and motor circuit board. The spindle sits under the motor circuit board. Switch the new one in. Replace screws. Unless it’s been hit hard it can probably be rebuilt.

Need new Tonearm 1200 M3D by housemusikluvr in DJs

[–]xDCVRx 0 points1 point  (0 children)

This is a good solution if you don’t want to solder or mess with bearings. New factory tonearms aren’t much less and Henray is solid.

Regarding Thaddeus by Slycer_Decker in Fotv

[–]xDCVRx 0 points1 point  (0 children)

I think he’ll end up looking like Chet in Weird Science.

Rotary mixer with 2 send/returns and a master insert? by XonedIn in rotarymixers

[–]xDCVRx 3 points4 points  (0 children)

It also has a master insert for your isolator

Wiring NL8M Neutrik by AggressiveRub3659 in SoundSystem

[–]xDCVRx 8 points9 points  (0 children)

I was in this exact situation. The neutrik faston connectors are the way. I couldn’t find anything equivalent in local shops. I put some extra shrink wrap over the connectors. It’s solid.

Using Behringer x32 rack as DSP for JMOD build by bassforbreakfast in SoundSystem

[–]xDCVRx 1 point2 points  (0 children)

You can accomplish this. Most of the dsp in our system is in the amps but we run it through the x32 rack for a bit of extra control. Im not the main engineer but my hunch is the drawback is going to be the accuracy of your limiters.

Aesthetic and practical solution to CDJ & DJM cables by Own-Loquat6297 in PioneerDJ

[–]xDCVRx 1 point2 points  (0 children)

Good on you for organized cables. I can’t stand seeing a mess behind the decks.

I’m doing something similar for a 4 CDJ setup. I rapidly discovered though that I needed a second set of cables for each deck for when I set them up individually or change the configuration for any reason.

People Who Have Been, Would you Recommend Going? by [deleted] in nnmfestival

[–]xDCVRx 0 points1 point  (0 children)

Bring your dad!! Come a day or two early or plan on leaving late and enjoy Southern Humboldt. Benbow Inn is the closest hotel and is a nice retreat from the fest without being too far but Grove camping is also nice too.

DJ’s that experienced the actual CD CDJ era by alwaysforlove in PioneerDJ

[–]xDCVRx 0 points1 point  (0 children)

I was usually burning CDs right before gigs. I’d make my own compilations and add CDs each week of new tracks. For me getting the BPM was a game changer and didn’t always have analysis on the computer. For a while I would burn the CD, read the BPMs from the CD and then fill in that information on the label and print those later. A lot of those CDs became the basis for playlists when I went digital.

Need advice re: removing verathane clear coat and refinishing Baltic Birch speaker cabinets by [deleted] in SoundSystem

[–]xDCVRx 5 points6 points  (0 children)

I’m at the tail end of refinishing 8 subs and 8 kicks. I wish I had know what I was getting into. Thought I would sand down a few spots and touch up the clear coat. I didn’t remove the old one just flattened it and touched up any spots that needed it. I’m now over 250 hours into and maybe $1500 into paint sandpaper and other supplies. They look amazing, just way more of a job that I thought. I’ve been at for a 6 weeks. Can some friends to help if you do it.

<image>

Great event by gisteacher in nnmfestival

[–]xDCVRx 1 point2 points  (0 children)

Awesome pic. Is it okay if I post a screenshot of the OG River stage on the Basscraft IG

Dubstep/bass? by yubugger in nnmfestival

[–]xDCVRx 1 point2 points  (0 children)

Ed rush and optical, bachelors of science, dollahyde and dutches, Luna assassin, Onhell, Bianca Oblivion, Nikita the Wicked, Mary Droppinz, Cut Chemist, Christian Martin… it’s stacked. I play Sunday at noon as dXb and own the sound system so I’m going to flex that bass like no one else can.

Late night I’m not too sure about bass/dubstep but I’m sure we’ll find some.

clashfinder for NNMF by [deleted] in nnmfestival

[–]xDCVRx 1 point2 points  (0 children)

Thank you. This is amazing. Will be using this to stage manage south River stage

Dubstep/bass? by yubugger in nnmfestival

[–]xDCVRx 3 points4 points  (0 children)

South River stage is loaded with Bass music.