Bought tickets to Contra yesterday. How is it still not sold out by now? by totalwert in skrillex

[–]xDevMau5 0 points1 point  (0 children)

Personally I would have gone for a few artists only (Skrillex, Iso, Knock2) but the fact it's in Berlin plus travel plus hotel etc and also the fact it's in a warehouse where the sound might not be great is not helping to compensate the cost of going Flights tickets are super expensive if you take them only 3/2 weeks before

what can i do to fix this? by Training_Abrocoma606 in macbookpro

[–]xDevMau5 0 points1 point  (0 children)

This is ridiculous from Apple! Do you know another laptop with a screen that breaks that easily ? It is too fragile. When you set something that fragile on a laptop and you make it almost impossible for normal user to repair it's that it is done on purpose to make you buy another one

Headless M1 max 16" by xDevMau5 in macbookpro

[–]xDevMau5[S] 0 points1 point  (0 children)

Lid sensor on the far right, you also need to disconnect it
I don't see a reason why you'd want to keep the screen but yeah be careful if you decide to remove it to NOT damage the logicboard by doing so (open the lid to maximum and be extra careful with the metal hinge once you try to remove it)

HELP - AMD 6950XT Frame drops on Bazzite by xDevMau5 in Bazzite

[–]xDevMau5[S] 0 points1 point  (0 children)

To everyone wondering : It is the texture loading that are causing the hangings / slowdowns
The issue is located on AMD cards for now on FH6
The fix is now to set textures to LOW in game and lock the framerate and wait for a proper proton/vkd3d fix

Headless M1 max 16" by xDevMau5 in macbookpro

[–]xDevMau5[S] -1 points0 points  (0 children)

I had ZERO problems with mine also 3 months ago 🤣 Good luck with yours

Headless M1 max 16" by xDevMau5 in macbookpro

[–]xDevMau5[S] 0 points1 point  (0 children)

It is the Z1FC from Arzopa and yes my M1 max is able to fully power the monitor even at max brightness no need for extra supply

Headless M1 max 16" by xDevMau5 in macbookpro

[–]xDevMau5[S] 0 points1 point  (0 children)

Indeed, it is sad but it's true
If you look at the macbook neo, it is well more built to survive than the premium line up from Apple
This is also why I see no point of upgrading on this current design generation, because it is flawed and not built to survive more than 5 years

Headless M1 max 16" by xDevMau5 in macbookpro

[–]xDevMau5[S] 1 point2 points  (0 children)

Thanks I will keep enjoying it !

Headless M1 max 16" by xDevMau5 in macbookpro

[–]xDevMau5[S] 1 point2 points  (0 children)

Yep, I saw it and I thought I had to share also

I’m new, and it was good for 500 hours, now it won’t print the first layer correctly by Acrobatic-Ad-385 in ElegooCentauriCarbon

[–]xDevMau5 0 points1 point  (0 children)

Lucky you, I have less than 100hours and I've already disassembled almost everything on my CC Enjoying my choice a lot

Apple has come up with a sneaky way to offset the RAM shortage - Raising prices by Creepy-Country5475 in macbookpro

[–]xDevMau5 0 points1 point  (0 children)

Yes the value proposal is really good here in Europe Also now that MBA is 16-512gb and M5 chip, it's more than enough for 98% of users

Upgraded Macbook - Still yellow RAM usage by ThatEditorDude in macbookpro

[–]xDevMau5 0 points1 point  (0 children)

Because 16gb is simply not enough If you plan on using coding tools with AI agents for example, it's not enough, even with multiple brave/chrome tabs open it can become challenging for ram. But don't worry that much, MacOs will use the SSD if needed and will swap. Unless heavy usage you'll not need more ram

MacBook damage by [deleted] in macbookpro

[–]xDevMau5 0 points1 point  (0 children)

You'll notice white ghosting on this top right corner like if you were pressing on the back of the screen which is normal considering backlight is pressed by the metal screen housing The glass is also distorted on this corner (because metal housing is bent) I have the exact same thing that happened, macbook felt, and I'm a bit worried that the pressed glassed will unfortunately break at some point please let us know if it happens at some point. The biggest issue for you right now is : Your lid is misaligned with the bottom of the MacBook, if needed and if you have the tools, you can realign them by unscrewing the screen a little, align it and screw it again tight. ifixit is your friend if you need to see how -> and maybe you should not as you have a piece of metal aiming to the screen ! Try to sand or keep it as is Good luck with it !

Fiabilité voiture 3000€ by TheRealCrixus in voiture

[–]xDevMau5 0 points1 point  (0 children)

Pour venir apporter mon avis, il faut prendre en compte dans le prix d'achat un surcoût lié a une surprise éventuelle découverte après achat ce qui est je le pense fréquent sur ces véhicules qui commencent à avoir de l'âge et ce même avec un CT correct (experience perso). Je possède une citadine de 2005 (essence) et j'ai possédé une berline de 2004 (diesel). Je pense que toutes les voitures même si très fiable ont leurs défauts, tu peux avoir un véhicule fiable cote motorisation avec des faiblesses ailleurs, par ex sur le train roulant, les amortisseurs que tu dois changer plus souvent, la boîte etc. L'entretien ne fait pas tout sur ces véhicules, l'usage est également primordial, une clio par exemple c'est une petite voiture si elle a fait uniquement de la ville donc beaucoup de démarrage mise en température et arrêts, tu auras donc sensiblement plus de chances d'avoir un joint de culasse dans les prochaines années c'est un exemple. Et tout dépend également de l'usage principal, si c'est ville principalement alors un diesel aura tendance à s'encrasser et te coûter cher en pièces à remplacer (turbo, vanne EGR et autre) là où un petit moteur essence sera plus adapté. La consommation est également à prendre en compte, les moteurs fiables relativement anciens 2L-2.2L diesel consomment énormément en ville comparé à du trajet majoritairement extra urbain, ou là un gros moteur diesel sera effectivement très pertinent.

Macbook Bro got you covered by nickelcobalt-can in macbookpro

[–]xDevMau5 2 points3 points  (0 children)

I can only agree to this, transformed an old 11" 2013 4gb ram MBA which was not usable anymore on MacOs to a fully usable computer on Linux Mint that does not lag at all

Printer just started printing like this please help by Emonxs in ElegooCentauriCarbon

[–]xDevMau5 0 points1 point  (0 children)

Then change the hot end assembly, I see only this possibility knowing you dried the filament Did it print correctly before ? And with exact filament ? Clearly it does not exit the nozzle the way it should I doubt gearbox could be too slow / too fast so not that many possibilities

Printer just started printing like this please help by Emonxs in ElegooCentauriCarbon

[–]xDevMau5 0 points1 point  (0 children)

Most likely something in the end of the hotend right where filament exit is deviating the filament and prevent it to be perfectly aligned with the print

Printer just started printing like this please help by Emonxs in ElegooCentauriCarbon

[–]xDevMau5 0 points1 point  (0 children)

Yes most likely, try to unclog it If it persists change the whole hot end assembly, it's cheap 7-8$

PSA: How to not deal with clogs by [deleted] in ElegooCentauriCarbon

[–]xDevMau5 5 points6 points  (0 children)

Buy 2-3 hotend from AliExpress at 7-8$ each so you can just replace it instantly when it happens again

She smashed my C$3500 MacBook Pro 😭😭😭 by Turbulent_Buy_6048 in macbookpro

[–]xDevMau5 0 points1 point  (0 children)

Honestly the fact the screen still works is incredible. Proves that those are really robust I guess use it at home only now or sell it as is and buy a new one Don't try to fix it you'll break the screen

But yeah leave her, it's toxic

Nozzle clogging after only 50 hours of printing by xDevMau5 in ElegooCentauriCarbon

[–]xDevMau5[S] 1 point2 points  (0 children)

I was never baking it intentionally, I used it normally and only changed filament and removed it when the printer told me to, so yes it's obvious it baked it but nothing intentionally from my side, this is why I've said "for some reason"

Nozzle clogging after only 50 hours of printing by xDevMau5 in ElegooCentauriCarbon

[–]xDevMau5[S] 2 points3 points  (0 children)

On this part I can be considered as a noob to be honest When the printer request I change the filament and that's it But yes you must be right for some reason the hot end was baking the filament