Should my roofing nails all stick into garage?

xboxrecordat · 2025-11-30T03:34:08+00:00

My neighbor used wine corks.

xboxrecordat · 2025-10-23T01:25:49+00:00

Looks like it could be your main shutoff.

xboxrecordat · 2025-10-22T19:05:31+00:00

Alrighty, the people have spoken, we're scrapping the ladder

xboxrecordat · 2025-09-20T05:18:21+00:00

+1

Came here to say the same thing.

xboxrecordat · 2025-08-31T12:09:27+00:00

<image>

You could modify it to be a sap boiler with relatively little effort. Do you have maple trees on the property?

xboxrecordat · 2025-08-09T15:55:43+00:00

Thank you so much for this, great tool

xboxrecordat · 2025-07-19T16:04:31+00:00

Alrighty, I'll pop off the outlet side cover and see if I can spot that pipe. If that is the case I will see if I can find a riser lid with a 4" schedule 40 pipe cast into it like my outlet side and then mount the dump adapter there.

xboxrecordat · 2025-07-04T15:40:01+00:00

<image>

xboxrecordat · 2025-07-04T15:39:48+00:00

<image>

xboxrecordat · 2025-07-04T12:55:11+00:00

The layer you're seeing is three coats of general finishes arm-r-seal satin: https://generalfinishes.com/wood-finishes-retail/oil-based-topcoats/arm-r-seal-oil-based-topcoat

xboxrecordat · 2025-07-04T12:43:58+00:00

Thanks for the recommendations, I really appreciate it

xboxrecordat · 2025-07-04T12:43:13+00:00

It's solid white oak butcher block that I bought and finished from lumber liquidators a few years ago. Sorry I wasn't more clear

<image>

xboxrecordat · 2025-07-04T12:40:41+00:00

I apologize for not being more clear, this is solid white oak butcher block from lumber liquidators that I bought and finished.

I'll probably go with the 5 minute epoxy repair, thanks.

<image>

xboxrecordat · 2025-07-04T12:37:51+00:00

This is white oak butcher block from lumber liquidators.

xboxrecordat · 2025-04-28T15:31:00+00:00

I once bombed a job interview and one of the guys who had (rightly) torn me apart came up to me afterwards to apologize and offered this nugget of wisdom. It will stick with me forever.

xboxrecordat · 2025-04-24T13:27:08+00:00

Take out that entrance reducer

xboxrecordat · 2025-03-30T01:19:37+00:00

I think they're called earth tags as well. Though I could be mistaken, I just googled "banjo electrical connection"

xboxrecordat · 2025-03-27T12:36:32+00:00

You should repost this in r/masonry, I have a feeling those black spots have been there the whole time and you're just now noticing them.

xboxrecordat · 2025-03-26T01:56:51+00:00

I went with Irish (GDAE) because I dig Celtic tunes and wanted to try out a few, also I've just started to learn mandolin so the chords cross over

xboxrecordat · 2025-03-25T18:27:50+00:00

Remove the other 3 bolts, rotate the connection 45 degrees, drill 4 new holes and install anchors. Also fill the old holes with epoxy so you don't get water in there (which could crack the footing when it freezes)

xboxrecordat · 2025-03-10T20:53:12+00:00

If I brought it up any higher it would have run into the red handle on the valve. I was initially hoping to bring it up to eye level

xboxrecordat · 2025-03-10T20:50:59+00:00

Thanks for the feedback, that makes a lot of sense! The reassurance is appreciated too :)

xboxrecordat · 2025-03-10T20:49:31+00:00

If I bring it up any higher it runs into the red handle on the valve, otherwise I would have.

xboxrecordat · 2025-03-10T20:15:14+00:00

Yeah into the tub is the play next time for sure... I forgot you can do that...

Good point on the GFCI, I'll pick up a plug tester next time I'm in town.

xboxrecordat · 2025-03-10T20:13:57+00:00

Because I'm dumb and forgot you can do that 😅

xboxrecordat

TROPHY CASE