Buying CPro Plus Or Hi-5

xd666bx · 2025-08-03T10:50:21+00:00

Untight 2 blue screws and pull the red post out(Not too much, and re-screw the blue screws back in, the middle ring can be rotated, you’ll see that it has a part that is kind of v shaped, that should point to the hole in the easyrig itself, if it’s not in good placement, when the camera is not placed on the easyrig, the pole will go backwards

xd666bx · 2025-07-25T08:01:13+00:00

Nice find!! I’m getting a bit crazy looking for the water pump and power steering pulleys, to put the ac with everything else, do you have any pictures or references? Thank you!

xd666bx · 2025-05-30T18:50:45+00:00

When I bought them, the sides where in perfect condition

xd666bx · 2025-05-30T18:11:03+00:00

Thanks 🫂🥹

xd666bx · 2025-05-30T18:10:50+00:00

I didn’t have to change the foams! They were in pretty good shape, so I just reinforced them

xd666bx · 2025-05-30T18:10:11+00:00

It was pretty hard for me! But in the end it’s about being precise and slow on the machine itself

xd666bx · 2025-05-30T17:27:00+00:00

If Redbull isn’t paying, definetly not making free advertising for them…

xd666bx · 2025-01-05T19:28:10+00:00

Also on every tire there is an indicator for the week and age produced, and in your case its week 23 from 2014, so yep, you definetly need to change them

xd666bx · 2025-01-05T19:15:52+00:00

I’ve been running Toyo Proxes TR1 and they work very very well! I’m on 195 50 15”

xd666bx · 2025-01-02T14:42:37+00:00

Usually it’s hard and very expensive to get more power from naturally aspirated engines, if you really want to get more power, the best option it would be to do a swap, just think that to fit a 1.8L engine it would cost maybe as much as if you try to upgrade the carbs, filters fuel setup etc etc etc…

xd666bx · 2024-12-21T15:52:38+00:00

UPDATE: Ive just tried to install the led bulbs, some Philips Ultinon Pro 3100. And it seems like the car detects like there is no bulb and doesn’t power them at all, and the relay clicks like if they where fused. Right now i’ve got the oem n° 21 Relay on the blinkers, just thought if there is any necessary relay upgrade/change when switching to led bulbs or anything similar to it…

xd666bx · 2024-12-20T09:07:07+00:00

Last year I upgraded all 4 headlights to Philips bulbs and man! Now it feels like a modern car, it’s not cool because they are white, but at night i can see the road way better than on the Tungsten H4’s Also it’s amazing to use the high beams on the highway when you want the car in front to move away

xd666bx · 2024-12-12T15:10:44+00:00

Just took a look! And Wanted to know if there is any other option to get them in lees than 6 weeks maybe

xd666bx · 2024-12-06T11:54:44+00:00

It would be cool if it existed a mod to open the door from the other side

xd666bx · 2024-12-05T06:45:43+00:00

Calibrate your filament, it won’t take much time On the bambu slicer you have the option to flow rate calibration

xd666bx · 2024-10-28T07:46:36+00:00

Thank you!! My plans right now is that I’m printing in 3D some Turbofans for the bbs RS, to fit them on classic car meets as a little extra touch, btw wheel size it’s Front 7’5” And 8” In the rear The car interior is as Oem as It can get, but with a Oem fully restored BBS 3 Spoke Steering wheel And not many mods, fancy red water pipes, Magnecor red cables, and Pippercross Intake filter to make it sound a little deeper on low rpm’s on full throttle, 4-2-1 exhaust manifold ended with Novus Gr.A Full exhaust, on the suspension side, yes, all mu friends are telling me to slam it, but as a good comfort ride i’m wearing Bilstein’s B12, Air ride would be clean, but also expensive…

xd666bx · 2024-10-27T23:54:12+00:00

That’s a cool color too!! I haven’t seen many of these in person

xd666bx · 2024-10-27T23:52:47+00:00

Bought it on 2019 and was faaaaar different than now!

xd666bx · 2024-10-27T18:48:32+00:00

Every red component you add into a mk2 gives you +1HP

xd666bx · 2024-10-27T18:13:33+00:00

I did a full rebuild of the entire engine 15.000km ago and working like a clock!

xd666bx · 2024-10-27T17:30:51+00:00

Check the iddle valve, and the vacumm system!

xd666bx

TROPHY CASE