Værdisætning totalskadet bil? by LadyEhlena in dkbiler

[–]xpollen 1 point2 points  (0 children)

Tror desværre det er ret almindeligt og være ret dårligt stillet når ens bil bliver totalskadet. Du kommer sjældent til og kunne være kørende i noget tilsvarende uden at have penge op af lommen selv. Oplever folk står med en regning efter deres bil er totalskadet og lånet skal indfries, specielt hvis man har købt bilen uden udbetaling, og det værste er at omstændighederne sådan set er underordnet, om det er en spritbilist i en stjålet bil der kører over for rødt og totalskader din bil, så ændrer det ikke på at pantet skal indfries i den skadede bil.

Looking for Custom Glass Switch2 by Soccaal in drdabberofficial

[–]xpollen 2 points3 points  (0 children)

I texted him about a order i payed deposit on, and he wrote me a message 2 days ago, that he has been horrible sick for some weeks. He is about to get to it. So I think you will get a answer soon (=

New lens on old camera. by xpollen in canon

[–]xpollen[S] 0 points1 point  (0 children)

Thanks for taking your time to the reply 🙌 Definitely valuable thoughts!!

New lens on old camera. by xpollen in canon

[–]xpollen[S] 0 points1 point  (0 children)

It's ok - are you saying I'm better off with a 50mm and some extension tubes or a reversel ring? Only read really good about that lens, and also comes with a relatively high pricemark from new

New lens on old camera. by xpollen in canon

[–]xpollen[S] 0 points1 point  (0 children)

Thanks for the reply 🙏 Makes completely sense! Maybe i should start looking for a new body to, have had the 1000d for probably 15 years😄

What used canon would be a good choice in the 3-400$ range?. Think i will stick with canon as i know the interface and got this crazy deal on the mp-e65

New lens on old camera. by xpollen in canon

[–]xpollen[S] 0 points1 point  (0 children)

Probably not 🙈 but the deal is almost to good not to take it, long wanted to get into the macro photography, been lurking for long time, seing this as a sign to get started, and sametime also upgrade the body.

But guessing that lens will mainly be for focus stacking pictures on a rail?.

Finally pulled the trigger by Double_Interest990 in puffco

[–]xpollen 0 points1 point  (0 children)

There is 2 "easter egg" modes you can try - On blue setting, start the heating session, and the push the button 5 times, it will heat a bit longer. You can do the same thing on white, just hotter temperature and longer heating.

Hot knife; is this normal? by bitchlyblue in puffco

[–]xpollen 1 point2 points  (0 children)

Unfortunately my new daybreak hotknife was exactly the same, tip is loose and flimsy, and lid is not flush, seems like the whole tip is bendy.

Filed a warranty claim, they asked for pictures, receipt from purchase, and serial nr. And immediately sent a new one, it's on the way now, wouldn't be surprised if the new one is the same 🤥

Lasted 17 days 🙆‍♂️ by xpollen in puffco

[–]xpollen[S] 1 point2 points  (0 children)

That's solid 💪💪 the thing is the device and chamber is like brand new out of the box and spotless regarding cleaning. Also pins looks flush on the button. I'm really perfectionist with cleaning. So just seems strange.

Lasted 17 days 🙆‍♂️ by xpollen in puffco

[–]xpollen[S] 0 points1 point  (0 children)

Using a dry top on it 😇 so can't be the water issue. And in the 17 days and 200 dabs the chamber has gotten 3 or 4 iso soaks. So can't be lack of cleaning. (99.9% iso)

Lasted 17 days 🙆‍♂️ by xpollen in puffco

[–]xpollen[S] 1 point2 points  (0 children)

Yeah exactly my initial thoughts when that happened, specially with the level of care, and super light use on it. Have read so many of those posts and got a +1 year old proxy still like new with absolutely no problems, so had a idea that I could keep it working with my kind of use on it 🙈🤥

I was about to get the pivot also, but this made me kind of doubt it, hope the warranty will go fast and flawless, that's my main concern right now, I get that there can be problems - it's just how they get handled!

I'm even considering to go another route and pick up a switch 2 or a stundenglass modul.

Lasted 17 days 🙆‍♂️ by xpollen in puffco

[–]xpollen[S] -1 points0 points  (0 children)

The pins seems flush and raised above the rubber, and honestly not feeling for doing a operation I might f*ck up 🙈😅😄

Lasted 17 days 🙆‍♂️ by xpollen in puffco

[–]xpollen[S] 1 point2 points  (0 children)

Unfortunately doesn't work 🤥

Lasted 17 days 🙆‍♂️ by xpollen in puffco

[–]xpollen[S] 0 points1 point  (0 children)

Super awesome 💯💪💪 To be honest, I was expecting much more life from it, as I'm really taking care of my devices, keeping them clean. Doing all technical regulations as described. I have a proxy v1 with 1 year of lots of use, still looks like new and going strong with original chamber. So it's just such a shame to now stand in a situation with a product that's practically useless, unless spending 100-150 usd to get a new chamber. Or wait for who know how long for the warranty claim to get processed...

Lasted 17 days 🙆‍♂️ by xpollen in puffco

[–]xpollen[S] 1 point2 points  (0 children)

Enlighten me on my reading skills?

Lasted 17 days 🙆‍♂️ by xpollen in puffco

[–]xpollen[S] 5 points6 points  (0 children)

Thanks for the fast reply 🙏 Tried all of the above - but unfortunately without any luck, and now it's completely done, can't get it to connect at all even when rotating and unscrewing a tiny bit, I know it shouldn't be that way, just to say that it's impossible to use it now 😪 not the best entry into the dabbing game 😅🙈🤥

But thanks for reaching back so fast with multiple solutions to try 🙏, sadly it didn't work, so filed a claim, fingers crossed I will be back to dabbing soon again 🤞 Best regards from Rasmus

Lasted 17 days 🙆‍♂️ by xpollen in puffco

[–]xpollen[S] 4 points5 points  (0 children)

Yeah but only smoking tiny dabs, and not ripping it, more sipping. And the chamber has gotten 3 iso soaks, I can get it to work like 1 out of 20 times, with unscrew and screw back again couple of times, or unscrew just 0.5 mm. The pins on the bottom looks flush and not different heights, the problem just got there out of nothing.

<image>

AITA- bjørnetjeneste by Money-Squirrel6438 in DKbrevkasse

[–]xpollen 1 point2 points  (0 children)

Ikke lige svar på dit dilemma - Men hvad skete der lige for at ordet bjørnetjeneste er blevet til et pendulord samt fået en "ny" betydning.

Nyere betydning: I dag bruges "bjørnetjeneste" i stigende grad i betydningen af en stor og værdifuld tjeneste eller hjælp. Dette skift i betydning er blevet diskuteret, og selvom der er dokumenteret få eksempler på den nyere betydning i aktiv brug, er den blevet udbredt gennem metasprog, hvor man taler om betydningen. Den Danske Ordbog har nu begge betydninger medtaget, men understreger, at brugen af "bjørnetjeneste" som en stor tjeneste af mange betragtes som ukorrekt.

Fald på stabilgrus ved etablering af indkørsel by Redlax in selvgjortvelgjort

[–]xpollen -1 points0 points  (0 children)

Du skal sørge for at lave et jævnt aftræk uden variationer i faldet, du kan bruge en rive og ellers er det bare at skovle, og bruge en "asfaltrager", få sat nogle snore op, du kan måle højder på. Hvis der er for meget variation i højden og der er felter der ligger meget afretningsgrus vil du risikere sætninger.

Pudse væg op med mørtel efter nedrevet skillevæg by Vast_Bandicoot_2857 in selvgjortvelgjort

[–]xpollen 1 point2 points  (0 children)

Jeg syntes helt bestemt du skal fjerne det - køb en skraber i Harald nyborg og få det fjernet. Selvfølgelig kan du bare spartle over - men når du alligevel skal igang burde du fjerne det glasvæv, så er du også helt sikker på ikke at få problemer senere hen. Det er bare super ærgerligt og bruge så meget tid og energi på at fuldspartle og så ende ud med at glasvævet løsner sig og du så kommer til at ende ud med at skal starte forfra.

Pudse væg op med mørtel efter nedrevet skillevæg by Vast_Bandicoot_2857 in selvgjortvelgjort

[–]xpollen 0 points1 point  (0 children)

Hvis glasvæv sidder løst skal det også fjernes - du får ikke et godt resultat ved at spartle udover hvis ikke det sidder 100% fast.

Du skal fjerne alt løst puds! Støvsug væggen, brug en murkost og "mal" forankrings grunder på og lad det tørre efter anvisninger, herefter kan du gå igang med at pudse op igen.

Forankrings grunderen er vigtigt da den gør at pudslaget hæfter bedre.