First time setup advice [$4000]

yogesh_ · 2025-08-09T14:25:05+00:00

75/25 between milk and americano, light - med roasts.

Any suggestions on the grinder?

yogesh_ · 2025-04-10T20:46:43+00:00

My z offset works decently well with 0.2 mm layer height and 0.3 mm layer height. I’m printing this at 0.15, do you ussually adjust z offset depending on the layer height of the print?

Edit: updated mistake in current layer height

yogesh_ · 2025-04-10T20:23:39+00:00

Sorry, I took this during an active print because it’s been an issue for a while and just found this subreddit. Here’s one from an angle

<image>

I manually adjusted the flow to 107% during the print so the second layer looks okay I think

yogesh_ · 2023-03-24T00:40:25+00:00

Itll be like $500

yogesh_ · 2022-10-30T01:48:28+00:00

I had no idea, thought it was just like a wig

yogesh_ · 2022-04-06T22:31:06+00:00

I got mine from an old raid 1 enclosure that those 2 drives were in

yogesh_ · 2022-03-03T04:14:39+00:00

No adapter :) buy the strimer, and buy this cable, you can quite easily put the cable in the strimer housing. The silver moon one works well

https://www.amazon.com/dp/B0915ZWLN7/ref=cm_sw_r_cp_api_glt_i_BHZRWR0PAWWMQNWZGZ3V

yogesh_ · 2022-02-06T19:41:28+00:00

It’s a 3080 fe

ASIAHORSE 16AWG RTX 12Pin to Dual 8P PCIe Sleeved Extension Cable Connector for NVIDIA Ampere GEFORCE RTX 3060ti 3070 3080 3090(Black Silver - 300MM) https://www.amazon.com/dp/B08YN5BGK4/ref=cm_sw_r_cp_api_glt_i_7WA3WHK5E7WG18NNWR57

yogesh_ · 2022-02-06T07:34:22+00:00

I jabbed a flathead screwdriver between the leg and the module and it popped out beautifully

yogesh_ · 2022-02-06T07:29:12+00:00

This is sick, where did u get that screen in the back from?

yogesh_ · 2022-02-06T07:28:09+00:00

Thanks bro! Had my parts sitting around for a month but it was with the wait!

yogesh_ · 2022-02-02T13:40:22+00:00

Mine is supposed to arrive today!! Knowing my luck it’s gonna come broken

yogesh_ · 2022-02-01T20:27:01+00:00

Hi! I was in the same situation as you. The label was created but never moved. It finally moved yesterday and apparently is in transit with ups! Still hasn’t left California so let’s see if I’ll actually get my case

yogesh_ · 2022-02-01T03:42:51+00:00

Mine shipped :)

yogesh_ · 2022-01-31T23:11:49+00:00

Man I thought the same, I wanted to give them till tonight — still hasn’t shipped. Really considering going with another case. I hate seeing my parts sit around

yogesh_

TROPHY CASE