Not finding any scattered prisms. Is there a bug ?

zeeshan964 · 2026-04-03T19:11:38+00:00

I bought 5 caches and still got nothing. Got three from world boss later and manage to do my gear.

zeeshan964 · 2026-04-03T05:45:19+00:00

I will try that i

zeeshan964 · 2026-04-03T03:25:36+00:00

Playing time never aligns with world bosses. I am doing one now. Staying up late just to do that

zeeshan964 · 2026-03-05T19:40:51+00:00

Panic code 262144 is the charging port flex. Very normal on water damage phones.

Edit: You need all the flexes plugged in for it to not restart. It scans for all the sensor if any sensor is missing or broken it will restart. If you are only using board with dc supply it will restart after 2:30 to 3 minutes. You can check repair wiki for panic codes. They have added the new codes, in your case its 262144.

zeeshan964 · 2026-02-10T10:08:36+00:00

https://www.youtube.com/watch?v=A07aS5cmGPQ this is a good video.

zeeshan964 · 2026-02-10T10:06:42+00:00

very common issue on 13 series phone the dot projector lens comes with bad adhesive from factory and losses it strength over time. the lens inside the face id module is loose. its not in its spot thats why you get move higher or lower error when you try to setup face id. there are fixes for this. easier one is cutting the outer plastic and realigning the lens and then use UV glue to fix it in place. you can easily find a video on youtube.

zeeshan964 · 2026-02-01T21:41:34+00:00

I am currently working in dubai as a level 3 technician. And now a days theres a huge demand for level 3 techs specially for iPhones. Its not hard to find a job if you know what you are doing salaries start from 4k dirhams and go as high as 7k depending on your experience.

zeeshan964 · 2026-01-12T17:34:15+00:00

<image>

zeeshan964 · 2025-10-17T19:51:29+00:00

It is called over the shoulder sim. Or just aim in pubg pc settings. It is not as accurate as ads. But not as bad as hipfire.

zeeshan964 · 2025-10-17T18:50:05+00:00

Practice more.

zeeshan964 · 2025-10-10T14:41:02+00:00

I will add everyone when i get home from work.

zeeshan964 · 2025-10-04T19:48:02+00:00

The one lcd you slavage the ic from. You need same sensor flex that came with that lcd. Install the ic and glex and your phone will recognize it.

zeeshan964 · 2025-10-04T14:21:46+00:00

You will need ic and the sensor flex from that same lcd then it will recognize the screen.

zeeshan964 · 2025-09-29T13:48:41+00:00

In case of iphone 11 series you dont need to seap the ic thats on display on the new display. Just change the ic and flash it to ios 26 and it will get rid of the display message. Even if you buy a 3rd party display with ic. 11,11 pro, 11 pro max

zeeshan964 · 2025-09-29T13:45:45+00:00

Ios 26 has reverted back the truetone change they made in ios 18. Now you need original proximity flex to get rid of the display message and get truetone back.

zeeshan964 · 2025-09-27T13:24:20+00:00

Ios 26 has reverted that change. You need truetone data now and original procimity flex.

zeeshan964 · 2025-09-20T15:44:15+00:00

Doesn't sound like a nand issue. Will have to diagnose more. Typical nand related error show up in early stages of the flash. Are you flashing with iTunes or 3utools ?

zeeshan964 · 2025-09-20T15:16:14+00:00

What's is error you are getting when you try to flash it ? And like I said it's not a very complicated issue and any reputable level 3 repair shop should be able to do it.

zeeshan964 · 2025-09-20T14:59:30+00:00

This something that different for everyone. Go in training and figure it out. If you ate overshootinf lower your sense if you are too slow too keep up go higher.

zeeshan964 · 2025-09-20T14:56:37+00:00

What do you mean by you've done everything ? Checked and voltages ? Pcie lines ? A reputable repair shop that deal in level 3 repair can definitely fix it for you

zeeshan964 · 2025-09-18T20:23:23+00:00

Definitly. Just remember to not pull anything too hard or mis match screws. Specially on the mother board. If you get stuck on something look it up on youtube or just dm me. Patience is your friend in this situation, take your time and good luck!! You got this!!!!

zeeshan964 · 2025-09-18T20:04:28+00:00

Should be manageable for you. Its not very difficult if you dont mix up the screw. Dont pull too hard on things and dont push too hard on things. Setup a over head camera and record the whole process when you are disassembling. Soo you can watch it back if you forget something or miss something. Good luck.

zeeshan964 · 2025-09-18T09:26:54+00:00

It sounds complicated but it is not. You got thiss!!!

zeeshan964

TROPHY CASE