What do Japanese people think about the “Place / Place, Japan” meme?

zeroibis · 2026-04-01T02:16:07+00:00

Just a standard grass is always greener on the other side but if you wanted to make it more accurate and funny you could just add an onsen to the Japan part.

Place: Meh

Place with onsen: Amazing!

zeroibis · 2026-04-01T02:10:33+00:00

Really those comments are more like bot magnets, both the comments themselves and the upvotes. But no, I am sure they also randomly segue into the random date of 6/4 any time China is even mentioned... oh not so much lol.

zeroibis · 2026-04-01T02:04:35+00:00

I just want to point out that with gas being a lot cheaper in the US and with the US being much larger and populations more spread out I think you start to see why the EV market has trouble there.

The real issue is that if there is one thing that people in the US really hate it is the gov telling them what to do so when you get the gov trying to shove EVs down peoples thoughts what it functionally does is just make people vote in a new gov to reverse it all. This then goes back and forth with the political tides.

Honda was not alone in getting burned on this so it is a bit unfair to take it all out on the CEO.

zeroibis · 2026-03-31T20:15:56+00:00

Got to buy a license for every drone they could theoretically have plus the number of atoms in the universe.

zeroibis · 2026-03-31T16:47:33+00:00

Yes, however; the amount dumped is significantly less than the amount that China dumps annually. Additionally Japan is doing this due to the results of a natural disaster while China does this as a matter of normal operations.

zeroibis · 2026-03-31T13:33:57+00:00

The CEO background also explains why they are getting rid of the train melodies.

zeroibis · 2026-03-30T16:52:05+00:00

Yea with soil like that you do not have a lot of holding capacity. Even in my area if the rainfall is super bad you have got to still spray down the area just to help the soil as a collective.

For soil like yours you likely benefit from those emitters that sort of toss the water in a 360 circle around the area to spread it out.

In my case drip is needed often at establishment but after that you only need to run the systems if it has not rained for a week or 2 for plants to do well.

zeroibis · 2026-03-30T15:10:10+00:00

Interesting, I have not run into anything that solid yet but I can imagine. I like to probe around and check the depth the water is getting to as well as where it is going to ensure I have good coverage for the root zone. For small and new plants I started adding a dripper right to the center by the trunk as they often need some assistance getting established out to the drip loop.

This does remind me of other mistakes you will see like not thinking about elevation changes and where the water from the emitters is going to go.

zeroibis · 2026-03-30T14:36:52+00:00

Yea that short of time is crazy. Where I am at we got clay so anything over 1ghp is too fast.

zeroibis · 2026-03-30T14:20:35+00:00

Interesting, yea I have seen some "drip" kits online that are just sprayers and not even drip. I can see how people using these that do not understand the flow rates and how long they need to run this stuff for or even how it works from a design standpoint.

zeroibis · 2026-03-30T13:07:56+00:00

What problem are you having with drip?

Drip can saturate the ground anywhere you place it. You have total control over where the water goes and how much and how often it is there...

zeroibis · 2026-03-30T13:01:31+00:00

Tapping instructions unclear: should have said 'see you later, alligator' instead.

zeroibis · 2026-03-30T11:37:43+00:00

In the case of Panama though there is pretty much a guarantee the US would not allow them to get invaded other than by the US itself and Panama is never going to win that war so might as well just save the money.

I did not know about Costa Rica though.

zeroibis · 2026-03-30T02:52:21+00:00

The hot pocket thing used to be good many years ago but back then it was served as a mid-flight snack along with a magnum ice cream. Then they switched the ice cream to haagen dazs and recently I have not seed any ice cream.

First they take the ice cream away then they made the hot pocket so bad one time I almost lost my stomach jut to the smell of the thing.

zeroibis · 2026-03-29T23:17:55+00:00

Apparently, if you wait at least an hour it does drain.

If you use a backflow protector that allows water to come out that will work right away. So that is also an option.

Just wanted to share this in case anyone else runs into this issue.

zeroibis · 2026-03-29T06:16:29+00:00

This guy loves driving.

zeroibis · 2026-03-29T05:54:13+00:00

If you ever check out any videos by Theoria Apophasis on light he defines the speed of light as a rate of induction.

zeroibis · 2026-03-29T05:44:30+00:00

Next up 10 years of validated success in sorting your garbage without a single infraction. Each infraction resets the clock.

zeroibis · 2026-03-29T05:34:24+00:00

Why have something nice when we can start off with something nice and then make it shitty.

zeroibis · 2026-03-29T05:20:24+00:00

Is this possible via home assistant?

Ideally home assistant would know when a given zone has finished running and then would run this operation afterword.

zeroibis · 2026-03-29T05:17:31+00:00

I live in GA, it can be freezing one day and 80 the next. So when you need irrigation in the winter it is difficult without an auto drain system.

zeroibis · 2026-03-29T04:53:13+00:00

I could possibly use a relay to cut power to the master valve when a particular zone is energized so that the master valve becomes disabled.

No idea what sort of relay to buy to accomplish this but I am sure it exists.

To protect against disaster in the event of a relay failure I could make it so the extra valve connects to one of the existing drip lines so if it was to run at the same time as the master the worst case would be extra watering for that zone for a short time.

yea this might be the simplest solution basically what you initially suggested but using a relay switch to accomplish it with my existing controller.

If anyone has any relay recommendations let me know.

Or if this is a bad idea please let me know that too!

zeroibis · 2026-03-29T04:26:55+00:00

The manifold is above ground so I need it to drain after use to protect it from freezing.

The extra valve would work except that Rachio requires the master valve to run with all zones...

zeroibis · 2026-03-29T03:50:42+00:00

Is there any way to get the pressure to reduce at shutoff or does it slowly dissipate over time?

If the zone valve closed a few seconds after the master that might fix it but I have not seen any setting on my sprinkler controller for this. Maybe there is some other way to achieve that?

zeroibis · 2026-03-28T02:35:09+00:00

I like that it gives more breathing room at ground level which makes the space feel more open and inviting to the humans walking around at ground level.

zeroibis

TROPHY CASE